Additional elastomers for eeSilk seatposts to fine tune spring rate to the rider.
Additional elastomers for eeSilk seatposts to fine tune spring rate to the rider.
The Almada Work-E is a sophisticated, foldable bike carrier which catches the eye thanks to its unique and robust design and LED lighting. The wide wheel rails are designed for even the largest E-MTBS so that two different sized bikes can easily be transported.Dimensions folded: w x h x d 22x87x52cmDimensions opened: w x h x d 154x118x52cmMax. tyre width: 2.8"Wheel straps with quick fastenerMovable wheel straps to adjust wheelbaseRail distance: 24cm (centre to centre)Weight: 20kgMax load: 60kg
I m packing my bags and I m going to take...certainly the bikes! No problem with the collapsible and foldable XLC Bike Carrier Azura Xtra LED. It can be fastened to your tow bar coupling in a jiffy and has place for two bikes of up to 30kg each. Both the carrier and your bike are lockable so as not to give thieves a chance.Bike carrier for mounting on the towbar coupling (lockable)LED lightsCollapsible carrierTilting feature for boot accessibilityCollapsible even with bikes mountedCapacity: two bikesSuitable for e-bikes for tyre widths up to 57 mm (2.25")Dimensions folded: 245x780x480 mmDimensions: 1300x780x480 mmCompatible for frame diameter: -Ø 60mm round tubeRemoveable frame clips, with automatic torque block at 3NmOwn weight: 16kgMax. additional weight: 60kgMax. weight per bike: 30kgBike and carrier lockableConnector: 13 pin and 7 pinMax. speed: 130 km/h120 cm max. wheelbase of the bikeLoading ramp can be attachedCompletely pre-assembledRail distance 220 mmAdjustable bike rails with automatic fasteningAssembly of extension set for 3rd bike (CC-X26) possibleRDW certified (EC type approval)TÜV certifiedOptional additional XLC parts:Extension set for 3rd bike XLC part code 2339000018Loading ramp XLC part code 2339000016
Designed to work at extreme loads and temperatures where conventional lubricants have proved inadequate ZX1 Super Grease increases the longevity of bearings, constant-velocity (CV) joints linkages and more. When operating at extreme temperatures and pressures ZX1 Super Grease will treat and protect metal components in a variety of environments such as mud, water, steam, acids and alkali's.Protects all bearings and machineryVirtually eliminates friction and wearLubricates and protects beyond the melt point of conventional greasesPrevents salt water ingressResists harsh chemicals and acidsProlongs component and lubricant lifeExtends maintenance intervalsReduces downtime and service costs
Designed to work at extreme loads and temperatures where conventional lubricants have proved inadequate ZX1 Super Grease increases the longevity of bearings, constant-velocity (CV) joints linkages and more. When operating at extreme temperatures and pressures ZX1 Super Grease will treat and protect metal components in a variety of environments such as mud, water, steam, acids and alkali's.Protects all bearings and machineryVirtually eliminates friction and wearLubricates and protects beyond the melt point of conventional greasesPrevents salt water ingressResists harsh chemicals and acidsProlongs component and lubricant lifeExtends maintenance intervalsReduces downtime and service costs
This stunning model's sintered compound is weather-resistant and extremely durable making these pads perfect for downhill and enduro use especially in difficult conditions.
The LifeLine Crank Extractor tool is an essential tool for any home or workshop mechanic.
Instructions for proper use: Unwind the handle to make room for the chain to be fitted to the tool Unwind the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Tighten the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool (repeat until the two pins are aligned) Now firmly tighten the handle to push the pin out, splitting the chain
Instructions for proper use: Unwind the handle to make room for the chain to be fitted to the tool Unwind the adjustable support screw at the rear of the tool Place the chain on the rear teeth of the tool (nearest the adjustable support) Tighten the adjusting support screw until it comes firmly into contact with the back of the chain Tighten the handle of the tool gently until the tool pin comes into contact with the centre of the chain pin If the two pins are not lined up, back off the handle and re-position the chain in the tool (repeat until the two pins are aligned) Now firmly tighten the handle to push the pin out, splitting the chain
Dual pivot caliper brake set with forged alloy arms and adjustable angle cartridge pads. Recessed mounting system as pictured.
The Extreme Weather Neoprene Overshoes are the most protective of dhb's overshoe collection. The 3.5mm-thick neoprene provides the ultimate in insulation against both the cold and wet. Further protection comes via the TPU skin on the external face. This non-porous and flexible skin prevents rain from being absorbed into the surface of the overshoe. The underside of the overshoes feature a robust Kevlar material, extending around the toe and heel to prevent excessive wear when walking in the overshoes. The holes in the base for the cleats are shaped to fit snugly, minimising the amount of road spray entering the shoe from below. A durable, size 5, lockdown, YKK zip at the rear makes it easy to get them on and off.