Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Bolt Thru AxleThe Brand-X Bolt Thru Axle design is made from hard-wearing materials and made to Brand-X's exact specifications. Available at a cost that won't break the bank, these Bolt Thru axles are durable, dependable and the ideal upgrade to your fork or frame.Optimised Bolt Thru DesignFeaturing a lever-less design for a clean look and added security, these super-tough thru-axles tighten up with 6mm Allen key heads. They're also compatible with the Brand-X switch lever (sold separately), which allows quick installation and removal of the thru-axle on the go, without having to carry a set of Allen keys with you. Available in a range of sizes, Brand-X has produced these thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features:Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications:Option 1: is designed for solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch.Options 2 and 3: are for frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts.Option 4: is for frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 5 is for frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch.Option 6: is for standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch.Option 7: is for the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch.Option 8: is for Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Option 9: is for Fox Suspension forks with the standard 15x110mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions:OptionTypeHub SizeLengthThread LengthThread PitchWeight1E-Thru12x100mm125mm17mmM12x1.531g2E-Thru12x142mm166mm17mmM12x1.540g3E-Thru12x142mm170mm17mmM12x1.542g4SRAM12x142mm172mm20mmM12x1.7542g5SRAM12x148mm180mm20mmM12x1.7543g6RockShox15x100mm146mm11mmM15x1.565g7RockShox15x110mm158mm11mmM15x1.569g8Fox Kabolt15x100mm146mm13mmM14x1.563g9Fox Kabolt15x110mm156mm13mmM14x1.567gBuy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Lightweight Road Thru AxleIf you’re looking to shave some grams from your disc brake road bike but still retain the same confidence-inspiring hold that a 12mm thru axle provides, this Prime Lightweight axle is the perfect choice. An ideal upgrade from your bike’s bulky factory fitted model, it has a low profile, leverless design to give your modern road bike clean looks and extra security when you leave it unattended. Tough, strong and durable, these road bike thru-axles can easily be tightened up with a 6mm Allen key.Features: Material: AL7075 Low profile and lightweight CNC Precision engineered Hollow for weight saving Torque to 10NmAvailable in a range of sizes, Prime has catered for the most common road bike lengths and thread pitches: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 120mm 15mm M12x1.5 24g 2 E-Thru 12x100mm 124mm 15mm M12x1.5 25g 3 E-Thru 12x142mm 160mm 15mm M12x1.5 28g 4 E-Thru 12x142mm 163mm 15mm M12x1.5 29g 5 E-Thru 12x142mm 166mm 15mm M12x1.5 30g 6 E-Thru 12x142mm 170mm 15mm M12x1.5 30g 7 E-Thru 12x142mm 173mm 15mm M12x1.5 31g Manufacturer Part Numbers: Front: 120/15/M12*P1.5: PLRDTA120B 124/15/M12*P1.5: PLRDTA124B Rear: 160/15/M12*P1.5: PLRDTA160B 163/15/M12*P1.5: PLRDTA163B 166/15/M12*P1.5: PLRDTA166B 171/15/M12*P1.5: PLRDTA171B 173/15/M12*P1.5: PLRDTA173BBuy Prime Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Lightweight Road Thru AxleIf you’re looking to shave some grams from your disc brake road bike but still retain the same confidence-inspiring hold that a 12mm thru axle provides, this Prime Lightweight axle is the perfect choice. An ideal upgrade from your bike’s bulky factory fitted model, it has a low profile, leverless design to give your modern road bike clean looks and extra security when you leave it unattended. Tough, strong and durable, these road bike thru-axles can easily be tightened up with a 6mm Allen key.Features: Material: AL7075 Low profile and lightweight CNC Precision engineered Hollow for weight saving Torque to 10NmAvailable in a range of sizes, Prime has catered for the most common road bike lengths and thread pitches: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 120mm 15mm M12x1.5 24g 2 E-Thru 12x100mm 124mm 15mm M12x1.5 25g 3 E-Thru 12x142mm 160mm 15mm M12x1.5 28g 4 E-Thru 12x142mm 163mm 15mm M12x1.5 29g 5 E-Thru 12x142mm 166mm 15mm M12x1.5 30g 6 E-Thru 12x142mm 170mm 15mm M12x1.5 30g 7 E-Thru 12x142mm 173mm 15mm M12x1.5 31g Manufacturer Part Numbers: Front: 120/15/M12*P1.5: PLRDTA120B 124/15/M12*P1.5: PLRDTA124B Rear: 160/15/M12*P1.5: PLRDTA160B 163/15/M12*P1.5: PLRDTA163B 166/15/M12*P1.5: PLRDTA166B 171/15/M12*P1.5: PLRDTA171B 173/15/M12*P1.5: PLRDTA173BBuy Prime Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
A pair of lightweight 17mm axle nuts. Available in 10mm and 14mm in various colors!
LifeLine Thru Axle Adaptor (TT-02)The Lifeline TT-02 Thru Axle Adaptors allow you to convert the LifeLine TT-02 Fluid Turbo Trainer to thru axle compatibility.The adaptor kit consists of a replacement axle cup (to fit to the trainer) and a thru axle. Note there are 3 different thread pitches of thru axle available and so please check your current thread pitch. The axles are compatible with 142mm hub spacing only. Unscrew the 'axle cup' from the turbo trainer and replace this with the TT-02 Thru Axle Adaptor. Features: Convert you TT-02 Fluid Turbo Trainer to thru axle compatibility 12 x 142mm hub spacing Compatible with with LifeLine TT-02 Fluid Turbo TrainerBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.