Key Features: The DT-3i.2 Dial Indicator Set bolts directly to the DT-3 allowing for greater accuracy and a way to measure results,Now includes an elongated, cylindrical tip that is large enough to work around voids in most rotors.
For the hx-one we had to start with the finest s-2 tool steel, a shock resistant steel which has been refined by swiss and german toolmakers for the optimal balance of strength, hardness, shock resistance and dimensional control. S-2 yields stronger tools with much harder surfaces for prolonged tool and fastener life. The keys are then coated with thin-dense chrome, a process generally reserved for mold tool components or optical grade surfaces inside molding tools. This coating provides the hardest, most dimensionally stable finish possible on each hex key. Finally, each tool is spray coated with a high-grip, high-visibility textured polymer finish for maximum grip and control. No more dropping your tools with greasy fingers or losing them on your workbench!Included with the hx-one essentials kit is the proprietary silca 17-4 stainless magnetic adapter. The adapter with a pleasant magnetic click turns the 6mm hex key into a ¼" socket drive which can fit any common ¼" driver bit. Included in the kit are the 6 most common torx sizes, 2 phillips head and 2 flat head drivers. You can literally handle any modern bicycle fastener with the tools in the box.Each hx-one kit is lovingly packed into a fully CNC machined box made from sustainable beech wood. Each box is hand sanded and finished before receiving the stainless steel silca shield on the lid.One of our goals with this lifetime set of tools was to have it be completely one-hand accessible (we've all been there..). The fine beechwood box uses a magnetic closure system and each tool rests in a CNC machined slot, held in place by a single elastomeric tab. Each tool fits into and out of its slot with a satisfying 'click' so that even when stretched one-handed from work stand to workbench, you can be confident in your placement.
Bottom Bracket Lockring Tool for Specialites TA Axix and Axix light bottom brackets.
Tool for removal and installation of Shimano crank fixing bolts.
Cyclo Pro Series Cassette Remover Shimano Hyperglide with a chain whip and lock ring tool remover set for holding cassettes and freehubs when removing the locks. Shimano HG fit.
An 8-way, hexagonal key ring wrench set from Cyclo Tools that featured a hard-wearing tempered construction that is sturdy and reliable and a comprehensive range of wrench sizes.
This is a top quality Hexagonal Ball End Key Wrench Set featuring 8 wrenches for a comprehensive range of bicycle sizes. Made from workshop quality chrome vanadium, it features a ball-ended design for angled entry and the holder forms a T-bar handle making it a versatile addition to any tool set.
The Ball Ended Y Wrench from Cyclo Tools features a comfortable dual moulded grip, is nickel plated and features the 4, 5 and 6mm Allen keys making it a versatile, easy to store addition to your tool set.
The Cyclo Y Torx Wrench is a handy tool to keep around for those mechanical emergencies when youre out on the road. The distinctive Y design holds three Torx screwdrivers.
This Gear Hanger Alignment Tool is made from strong, high-quality nickel plated steel and comes with a mounting bolt set in nylon bush to make usage simple and easy.
The Cyclo Deluxe Multi Tool is a handy, reliable implement that is essential to have around and can save you from any number of emergency maintenance situations!. Made from incredibly strong chrome vanadium, it includes spoke keys, assorted spanners, hexagon keys and cross and slot screwdriver heads.
Key Features:Handcrafted from 7075-t6 aluminium in the USA,Weighs 170g,28cm handle length,Works with any cassette up to and including 12-speed.
Pro Seattube Reamer Handle, Adjustable Reamer handle for 07830, 07831, 07832
This tool is for making adjustments on a bicycle when pedals are not in place or present.The Enduro Pedal Dummy Tool stainless steel shaft threads into crank arm and rotates smoothly on one larger, stainless 6302 bearing.
Cyclo adjustable reamer for 27.00 - 30.25mm, 23.81-36-98mm and 30.35-34.13mm seat tubes.
Cyclo Tools dot brake fluid is a premium DOT formulation offering excellent brake performance. It is essential to use the correct fluid in your hydraulic brakes. Not suitable for mineral brake systems. Wide necked bottle enables the syringe to fit right into the bottle, eliminating waste. The fluid will mix safely with other DOT3, 4 and 5.1 brake fluids but is not compatible with 5 silicone based fluid.
The multi-configurable, multi-functional mini ratchet with 2-8nm torque measurement that is breaking the internet! Over 1200% funded on kickstarter! As of December 7, 2016, we have completed fulfilment of the kickstarter orders and both t-ratchet and ti-torque are available for order!!T-ratchet and t-torque combine to form a powerful force for good. Roughly 70% of damage to high end carbon components such as seat posts, handlebars and stems comes when making adjustments without using torque. The majority of adjustments made without torque occur on the roadside or trailside! This makes sense, as you might set up your new ride or component at home using your shop torque tool, or a pre-set torque tool, but need to raise/lower you saddle, or adjust the tilt of your bars out on the road. Too low of a torque and the component will slip which is both unsafe and can cause damage, too high a torque and you can permanently crush the component.T-ratchet and ti-torque solve this by providing a highly ergonomic tool with a torque measuring extender that provides real time feedback to the torque you are tightening to. Simply begin tightening the fastener while watching the scale on the ti-torque, it will show you in real time the torque being applied!!The t-ratchet uses interchangeable magnetic components to convert from screwdriver to ratchet, to ratcheting t-handle in seconds, and the ti-torque is made from titanium and aluminium with hard steel contact surfaces allowing it to weight only 30 grams!
Compatible for Bosch® Active / Performance LineUse with 1/2" Two-way Ratchet Wrench (#53R4)
A high quality Philips head screwdriver, made from durable, strong materials and with a comfortable grip.
Genuine Wheels Manufacturing spare or a great tool on it's ownTo remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 1-ö wrenches (for large sized extractors), hammer and punchThe correct size extractor will fit snugly into the inner diameter (I.D.) of the sealed bearing you wish to extractPlace extractor into I.D. of sealed bearing until it seats flush with the shoulder of the extractorTighten nut with wrench while securing extractor with other wrench. Tighten nut until the extractor is firmly in place within the I. D. of the sealed bearingOnce the extractor is secured, align a punch with back side of the extractorGently tap on the punch until bearing is removed along with the extractorThe bearing is now removed. Install new sealed bearings with a Wheels Mfg PRESS-1 (rear hub & bb-Æs) or PRESS-2 (front hub)