Wolf Tooth Light Action MTB Dropper Seatpost LeverThis dropper lever is specifically engineered for use with cable-actuated dropper seatposts and it features a 6061 T6 aluminium body with a Delrin axle, making it tough and reliable as you tackle the most demanding of mountain bike (MTB) trail riding conditions. With a design that requires much less effort to operate than most remotes on the market, this model is developed as a dependable choice of upgrade from your dropper seatpost's factory-fitted lever. Wolf Tooth has kitted out this version with a longer arm and impressively light actuation, so riders can benefit from super-smooth operation as you dominate across the mountain. Suitable for use on all cable-operated droppers, it gives you the extra leverage and fine control to quickly drop your saddle for a descent or position it perfectly for a tough climb.Compact, Ergonomic and Sturdy Dropper LeverReMote LA, or Light Action, is another option in Wolf Tooth's class-leading ReMote line of dropper remotes. They solve common dropper remote complaints with the compact, ergonomic, and sturdy ReMote LA. The patent-pending ReMote LA has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote.Lightweight with Smooth Ball Bearing ActionBeginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.Compatibility:- Compatible with all cable-actuated dropper posts.- Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post.- If your post is not listed in the options, measure the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best (available separately).- ReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The updated model of the Tech 3 brake has a threaded hole and will require some modifications to the ReMote base.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: MTB Not Included: Cable and housing (available separately) Made in the USA Weight: 22.2mm Clamp Option: 38g; Shimano IS-EV Option: 35g; Hope Option: 36g; Shimano IS-AB: 36g; Matchmaker X Option: 38.5g; Shimano IS-II Option: 35gTechnologies: Upfront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action Lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available. High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad Compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Numbers: WTREMOTELACLMP Black 22.2mm Clamp WTREMOTELAISEV Black Shimano IS-EV WTREMOTELAHOPE Black Hope WTREMOTELAISAB Black Shimano IS-AB WTREMOTELAMM Black Matchmaker X WTREMOTELAISII Black Shimano IS-IIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth ReMote Dropper Lever for Matchmaker XCompatible with SRAM Matchmaker X brake levers to give you a clean look on your bars, this universal dropper seatpost remote lever works with all mechanical-type droppers and brings you fast, accurate and smooth control of your saddle height. Made by Wolf Tooth from a tough 6061 T6 aluminium, it’s ready for aggressive use as you drop your saddle out of the way for wild descents and raise it back up for more attacking the climbs more efficiently.Low-Profile Dropper LeverEasy to use, this tough component is kitted out with a low-profile lever which sits close to your handlebar. This minimises the gap between your bar and your thumb for superior control that feels like a natural extension of one of your limbs. Also, to reduce the likelihood of knee contact in technical terrain sections, it offers more space around your bars to overcome challenging riding situations.Integrated Cable AdjustmentEquipped with a barrel adjuster, this top-quality component allows you to make on-the-fly changes quick and easy. This eliminates the rattles caused by common inline cable adjusters for a cleaner and more reliable rider-tuned set-up.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Compatibility: SRAM Matchmaker X Weight: 38.5g (approx.) Please Note: As this model is designed to combine with your SRAM Matchmaker X compatible brakes, it does not come with its own round handlebar clamp.Technologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing Low-Profile, Light Action lever: The ReMote LA (light action) lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals Integrated Cable Adjustment: The ReMote LA's barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available here High-traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Cyclocross 130 BCD ChainringThis chainring is specifically designed for cyclocross use. It features Wolf Tooth's renowned Drop-Stop technology, which uses a patented wide/narrow chainring profile to spread the load and improve chainring life. In addition, it also allows for excellent mud clearance, which results in reduced friction. This makes it a great choice of upgrade for multiple riding disciplines from cyclocross to commuting.Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52T rings. Fits 130 BCD 5 arm cranksets. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 130 BCD 5 arm cranksets. Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800. Not compatible with Campy CX10/11. Chain Compatibility:10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain. If using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retention. SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found online. Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. 38T important note: The chain may contact the spider arm slightly when using the 38T chainring. We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring. Features: Material: 7075-T6 Aluminium Use: Cyclocross BCD: 130mm Number of Chainrings in the Box: One Made in the USA Part Numbers: 38T: WT13038; 40T: WT13040; 42T: WT13042; 44T: WT13044; 46T: WT13046; 48T: WT13048; 50T: WT13050 and 52T: WT13052 Weight: 38T: 52g; 40T: 60g; 42T: 62g; 44T: 79g; 52T: 132gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Cyclocross 130 BCD ChainringThis chainring is specifically designed for cyclocross use. It features Wolf Tooth's renowned Drop-Stop technology, which uses a patented wide/narrow chainring profile to spread the load and improve chainring life. In addition, it also allows for excellent mud clearance, which results in reduced friction. This makes it a great choice of upgrade for multiple riding disciplines from cyclocross to commuting.Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52T rings. Fits 130 BCD 5 arm cranksets. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 130 BCD 5 arm cranksets. Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800. Not compatible with Campy CX10/11. Chain Compatibility:10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain. If using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retention. SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found online. Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. 38T important note: The chain may contact the spider arm slightly when using the 38T chainring. We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring. Features: Material: 7075-T6 Aluminium Use: Cyclocross BCD: 130mm Number of Chainrings in the Box: One Made in the USA Part Numbers: 38T: WT13038; 40T: WT13040; 42T: WT13042; 44T: WT13044; 46T: WT13046; 48T: WT13048; 50T: WT13050 and 52T: WT13052 Weight: 38T: 52g; 40T: 60g; 42T: 62g; 44T: 79g; 52T: 132gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Jack Wolfskin Pack and Go Down Vest is simple, practical and lightweight. Part of Jack Wolfskin's Pack and Go range, it has an extremely small pack size and weighs next to nothing. Protective features include a windproof, water-repellent and highly breathable Texashield Ecosphere Pro shell fabric, alongside a Responsible Down Standard certified down insulation for easy warmth without the bulk. Two handy pockets (one of which can double up as a storage pocket for the gilet), and reflective detail complete the functional design.
The Jack Wolfskin Women's Stormy Point Waterproof Jacket has been designed with the keen adventurer in mind. Made with TEXAPORE fabric, it is waterproof and windproof, all the while remaining lightweight, durable, and breathable. A hood and adjustable hem also provide extra protection in keeping the excess cold or water out, and three handy pockets lend ample space for easy-reach trail essentials. Plus, the jacket is PFC-free Bluesign® and Green Button certified, and has been made with an eco-dyed mesh lining, limiting the harmful effects of production on the planet we love to explore.
The Jack Wolfskin Stormy Point Waterproof Jacket has been designed with the keen adventurer in mind. Made with TEXAPORE fabric, it is waterproof and windproof, all the while remaining lightweight, durable, and breathable. A hood and adjustable hem also provide extra protection in keeping the excess cold or water out, and three handy pockets lend ample space for easy-reach trail essentials. Plus, the jacket is PFC-free Bluesign® and Green Button certified, and has been made with an eco-dyed mesh lining, limiting the harmful effects of production on the planet we love to explore.
Wolf Tooth Race Face Cinch Direct Mount Chain RingDeveloped for unrivalled innovation, reliability and durability, this direct mount chainring features a patented Drop-Stop wide-narrow tooth profile. This means that you'll benefit from its excellent chain stability on your single speed setups, while it also dislodges mud, dirt and excess debris more efficiently. The result is a more reliable and cleaner chainring setup. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention and mud clearance. Compatibility:Any Race Face Cinch system crankset.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding abilityFor 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle).Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).Features: Material: 7075-T6 Aluminium Speed: Single speed Mount: Direct mount Number of Chainrings in Box: One Crank Compatibility: Race Face CinchChainline: 52mm BoostOffset: 3mmMade in the USA Part Numbers: 32T: WTRFC32BST; 34T: WTRFC34BST; 36T: WTRFC36BST Weight: 32T: 58g; 34T: 69g; 36T: 75gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano 12 Speed MTB Chain Ring 104 BCDThis 104mm BCD chainring is specifically designed for use with Shimano XTR, XT, and SLX 12 speed Hyperglide+ chains. It features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity.104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market.Fits any 104 BCD crankset.Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment.Compatibility:Fits any 104 BCD crankset.Compatible with Shimano 12-speed Hyperglide+ chains.Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours.104 x 30T - use 10mm bolts.104 x 32t, 34t, 36t, 38t use 6mm bolts.If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm).104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).Features: Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Speed: 12 speed Number of Chainrings in the Box: One Made in the USA Part Numbers: 32T: WT10432SH12; 34T: WT10434SH12 and 36T: WT10436SH12 Weight: 32T: 47g; 34T: 56g and 36T: 60gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano 12 Speed MTB Chain Ring 104 BCDThis 104mm BCD chainring is specifically designed for use with Shimano XTR, XT, and SLX 12 speed Hyperglide+ chains. It features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity.104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market.Fits any 104 BCD crankset.Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment.Compatibility:Fits any 104 BCD crankset.Compatible with Shimano 12-speed Hyperglide+ chains.Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours.104 x 30T - use 10mm bolts.104 x 32t, 34t, 36t, 38t use 6mm bolts.If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm).104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).Features: Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Speed: 12 speed Number of Chainrings in the Box: One Made in the USA Part Numbers: 32T: WT10432SH12; 34T: WT10434SH12 and 36T: WT10436SH12 Weight: 32T: 47g; 34T: 56g and 36T: 60gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This 12 speed chainring features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity. 104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop® tooth design is the best performing and longest lasting wide/narrow chainrings on the market. Fits any 104 BCD crankset. Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility: Fits any 104 BCD crankset. Compatible with Shimano 12-speed Hyperglide+ chains. Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours. 104 x 30T - use 10mm bolts. 104 x 32t, 34t, 36t, 38t use 6mm bolts. If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm). 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).
Wolf Tooth Shimano 12 Speed MTB Chain Ring 104 BCDThis 104mm BCD chainring is specifically designed for use with Shimano XTR, XT, and SLX 12 speed Hyperglide+ chains. It features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity.104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market.Fits any 104 BCD crankset.Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment.Compatibility:Fits any 104 BCD crankset.Compatible with Shimano 12-speed Hyperglide+ chains.Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours.104 x 30T - use 10mm bolts.104 x 32t, 34t, 36t, 38t use 6mm bolts.If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm).104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).Features: Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Speed: 12 speed Number of Chainrings in the Box: One Made in the USA Part Numbers: 32T: WT10432SH12; 34T: WT10434SH12 and 36T: WT10436SH12 Weight: 32T: 47g; 34T: 56g and 36T: 60gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.