Nukeproof Horizon Pro Replacement Flat Pedal PinsThese pedal pins are direct replacements for the pins found on the Horizon Pro model. The washers used for adjusting the pin height are also included with this set. Features:Compatible with Nukeproof Horizon Pro and Horizon Sam Hill pedals Replaceable Pins Adjustment washers includedBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Sam Hill Horizon StemThe Nukeproof Horizon Stem is the newest addition to the Nukeproof cockpit component range. Developed alongside Sam Hill, Nukeproof sponsored athletes and staff, the Horizon stem has been tested in the most demanding Enduro and Downhill conditions. Nukeproof has optimised this stem to be lightweight and ultra-strong and this Sam Hill Signature version also comes with Ti bolts and is finished off with Sam's signature logo laser etched into it. Precision CNC MachinedThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Modern MTB Stem with a Clean LookThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with "no gap" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and is also included within the stem packaging.To ensure correct torque can be achieved, stem steerer bolts must be greased before installation on the bike.Features: Precision CNC-machined Ti Bolts throughout Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Bar Clamp: 31.8mm Steerer Diameter: 1 1/8" Length: 35mm, 50mm, 60mm Rise: +/- 5mm Stack Height: 35mm Weight: 118g (31.8 x 35mm), 161g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top Guide With BashDesigned by the Nukeproof engineers for performance, this top guide with bash ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. MTB Top Guide with BashguardReady for intense off-road adventures, this top guide also comes equipped with two bashguards. This allows you to choose from a guard for 32T chainrings or a guard for up to 36T chainrings, so you have everything you need in the box to get riding. One final highlight is the Nukeproof ISCG Top Guide With Bash comes complete with stainless steel hardware. This means you'll benefit from its maximum strength in all-weather conditions. This guide fits all bikes with an ISCG 05 mount and comes with plenty of washers to allow you to fine tune your chainline setup. Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 106g (32t bash, 3x bolts & 3x 3mm washers)Manufacturer Part Numbers: Copper: NPCHAGUITGWB Black: NPCHAGUITGWBBLK Blue: NPCHAGUITGWBBLU Grey: NPCHAGUITGWBGRY Purple: NPCHAGUITGWBPUR Red: NPCHAGUITGWBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Chain Guide ISCG 05 Top Guide With BashDesigned by the Nukeproof engineers for performance, this top guide with bash ensures that you don't drop your chain when out on the MTB trails. It features a hard-wearing alloy backplate with a composite top guide. This makes it more than capable of withstanding all the knocks and jolts as you blast across the mountain. Nukeproof has also equipped this trail-ready top guide with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. MTB Top Guide with BashguardReady for intense off-road adventures, this top guide also comes equipped with two bashguards. This allows you to choose from a guard for 32T chainrings or a guard for up to 36T chainrings, so you have everything you need in the box to get riding. One final highlight is the Nukeproof ISCG Top Guide With Bash comes complete with stainless steel hardware. This means you'll benefit from its maximum strength in all-weather conditions. This guide fits all bikes with an ISCG 05 mount and comes with plenty of washers to allow you to fine tune your chainline setup. Click here to view and download instructions.Click here for a Step by Step Installation GuidePlease note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: MTB Compatibility: 28-36T chainrings, Boost and Oval Weight: 106g (32t bash, 3x bolts & 3x 3mm washers)Manufacturer Part Numbers: Copper: NPCHAGUITGWB Black: NPCHAGUITGWBBLK Blue: NPCHAGUITGWBBLU Grey: NPCHAGUITGWBGRY Purple: NPCHAGUITGWBPUR Red: NPCHAGUITGWBREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.