Renthal started off making handlebars and the Fatbar Carbon 35 is the culmination of over 40 years of making the best handlebars out there. Taking everything that makes the standard Fatbar Carbon great, Renthal have increased the clamp diameter to 35mm, allowing them to lower the weight without reducing stiffness or strength and upping overall width to 800mm. The Fatbar Carbon 35 s full UD Carbon construction has allowed Renthal finite control over the ride feel, with the perfect amount of flex built into to the carbon layers to offer a perfect level of comfort and incredible control. Proven on the World Cup Downhill Circuit with numerous wins to its name, the Fatbar Carbon 35 is the ultimate combination of lightweight, strength, stiffness, superb feel and durability.The Classic Fatbar Now Available In Oversized 35mm Bar DiameterFull UD Carbon ConstructionRide Tuned Carbon Fibres Are Layered To Give Specific Ride Characteristics Shot Peened And Hard Anodised FinishSet-up Ease Fitting And Cutting DownUltra-Durable And DH Race Ready800mm Width7 Degree Backsweep / 5 Degree Upsweep Weight from 225g
Renthal started off making handlebars and the Fatbar Carbon 35 is the culmination of over 40 years of making the best handlebars out there. Taking everything that makes the standard Fatbar Carbon great, Renthal have increased the clamp diameter to 35mm, allowing them to lower the weight without reducing stiffness or strength and upping overall width to 800mm. The Fatbar Carbon 35 s full UD Carbon construction has allowed Renthal finite control over the ride feel, with the perfect amount of flex built into to the carbon layers to offer a perfect level of comfort and incredible control. Proven on the World Cup Downhill Circuit with numerous wins to its name, the Fatbar Carbon 35 is the ultimate combination of lightweight, strength, stiffness, superb feel and durability.The Classic Fatbar Now Available In Oversized 35mm Bar DiameterFull UD Carbon ConstructionRide Tuned Carbon Fibres Are Layered To Give Specific Ride Characteristics Shot Peened And Hard Anodised FinishSet-up Ease Fitting And Cutting DownUltra-Durable And DH Race Ready800mm Width7 Degree Backsweep / 5 Degree Upsweep Weight from 225g
Renthal started off making handlebars and the Fatbar Carbon 35 is the culmination of over 40 years of making the best handlebars out there. Taking everything that makes the standard Fatbar Carbon great, Renthal have increased the clamp diameter to 35mm, allowing them to lower the weight without reducing stiffness or strength and upping overall width to 800mm. The Fatbar Carbon 35 s full UD Carbon construction has allowed Renthal finite control over the ride feel, with the perfect amount of flex built into to the carbon layers to offer a perfect level of comfort and incredible control. Proven on the World Cup Downhill Circuit with numerous wins to its name, the Fatbar Carbon 35 is the ultimate combination of lightweight, strength, stiffness, superb feel and durability.The Classic Fatbar Now Available In Oversized 35mm Bar DiameterFull UD Carbon ConstructionRide Tuned Carbon Fibres Are Layered To Give Specific Ride Characteristics Shot Peened And Hard Anodised FinishSet-up Ease Fitting And Cutting DownUltra-Durable And DH Race Ready800mm Width7 Degree Backsweep / 5 Degree Upsweep Weight from 225g
Designed especially for the home mechanic the TS-8 allows accurate wheel truing at an economical priceAccepts wheels sizes from 16 inches to 29 inches with or without the tyre mountedInnovative sliding dropout allows quick and secure wheel installation accommodating hub widths up to 170 mmDishing (centring) the wheel is performed by simply flipping the wheel in the stand with no need for a separate dishing toolConstructed from heavy gauge steel to resist flexingThe TS-8can be used freestanding or bolted to a bench for extra stability
Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical priceAccepts wheels sizes from 16 inches to 29 inches, with or without the tyre mountedInnovative sliding dropout allows quick and secure wheel installation, accommodating hub widths up to 170 mmDishing (centring) the wheel is performed by simply flipping the wheel in the stand with no need for a separate dishing toolConstructed from heavy gauge steel to resist flexingThe TS-8can be used freestanding or bolted to a bench for extra stability
Designed for the home mechanic, TS-8 allows accurate wheel truing at an economical price. Can be used free standing or bolted to work bench Accurate wheel truing at an economical price. Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability. Accepts wheels from 16" to 29", with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the stand
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
For Cyclocross, presenting the carbon CX bar. It s the natural transition from your Thomson road bar for the cross season. Twin flats on the bottom of the bar allow taping your housing to create a round bar when wrapped. The top profile is round and as wide as possible. This is the carbon fibre cyclocross handlebar built to take all the season can dish out. This allows auxiliary brake levers to be safely used and still leaves lots of room for your hands. Certified to EN, tested to DIN+.Available in 40cm, 42cm and 44cm widths78.5mm Reach131mm, 133mm, 135mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Cross bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Cross bars is 78.5mm. Drop is proportional.The cross drops are:40cm - 131mm42cm - 133mm44cm - 135mm
The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm