Nukeproof Vector AM Comp Chromoly SaddleInspired and styled on the aerodynamic properties of fighter jets, the Nukeproof Vector All Mountain (AM) Comp Chromoly (CrMo) Saddle has been developed to offer comfort, performance and dynamic style. The Vector's distinctive lines are tailored to enhance the performance of a top-level race bike. The CrMo rails add strength to your saddle.Features:Rails: CrMoSize: 275mm X 142mmUse: Road, Mountain Bike (MTB)Weight: 240gBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Making light of any challenge, the On Women's Cloudlflyer 4 Running Shoes are built to support any runner and any running goal. The ultralight engineered mesh upper has been optimised for enhanced airflow to keep your feet cool on long runs while delivering a comfortable and secure fit with a plush tongue, plush tongue and 3D-moulded heel. The lightweight shoe with supreme support and cushioning. Helion™ superfoam midsole cushioning works alongside the CloudTec® sole to provide premium underfoot cushioning while the stability tube adds support and a bespoke Speedboard® converts soft landings into explosive take-offs for the ultimate ride. Finished with a grippy outsole with extended low-abrasion rubber pads at high-impact zones for long-lasting durability.
Making light of any challenge, the On Cloudlflyer 4 Running Shoes are built to support any runner and any running goal. The ultralight engineered mesh upper has been optimised for enhanced airflow to keep your feet cool on long runs while delivering a comfortable and secure fit with a plush tongue, plush tongue and 3D-moulded heel. The lightweight shoe with supreme support and cushioning. Helion™ superfoam midsole cushioning works alongside the CloudTec® sole to provide premium underfoot cushioning while the stability tube adds support and a bespoke Speedboard® converts soft landings into explosive take-offs for the ultimate ride. Finished with a grippy outsole with extended low-abrasion rubber pads at high-impact zones for long-lasting durability.
OneUp Components Narrow Wide Oval MTB Chain RingUpgrade your 104mm, SRAM 94mm, or Shimano 96mm Symmetric BCD crank with OneUp's tried and tested Narrow Wide profile traction chainrings. These oval chainrings give the ultimate in traction by smoothing out the torque delivered to your rear tyre. Reinforced wide tooth design provides maximum ring durability when run without a bash guard and aggressive crud chamfers give excellent mud shedding performance and extended ring life.Features: Get ultimate traction by smoothing out the torque you deliver to your rear tyre 12% ovality (32T is equal to a 30T-34T range) 115° clocking from crank arm puts the major axis in your power stroke Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit Perfect chainline with built in offset for a quieter drivetrain with improved chain wear and best drop performance Reuse your existing 8-10mm long ring hardware - no new bolt packs required Aggressive crud chamfers for awesome mud shedding performance and extended ring life Reinforced wide tooth design provides maximum ring durability when run without a bash guard Made from hard wearing 7075-T6 aluminum plate 104-32T and 94-30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible. Technical Data: Weight: 94mm - 42g (30T), 50g (32T), 59g (34T); 96mm - 50g (32T), 59g (34T); 104mm - 49g (32T), 58g (34T) Chainline: 48-50mm Material: 7075-T6 Aluminium Compatibility: 94: All symmetrical 4 arm 94mm BCD cranks (SRAM XO1, X1, GX); 94/96: All symmetrical 4 arm 94 or 96mm BCD cranks (SRAM XO1, X1, GX; Shimano compact triple M782, M672, M622, M612); 104mm: All 104mm cranks Buy OneUp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
OneUp Components Narrow Wide Single ChainringCompatible with a wide range of SRAM and Shimano cranksets, this hard-wearing Narrow Wide Single Chainring from mountain bike (MTB) component specialists OneUp Components provides ultra-efficient chain grip as you ride over the roughest terrain. Made from tough yet lightweight 7075-T6 Aluminium, plus featuring reinforced teeth and mud clearing chamfers, this chainring delivers the performance and strength you need and a long usage life.Features: Material: 7075-T6 Aluminium Speed: 9,10,11 and 12-Speed Chainline: 48-50mm Bolt Circle Diameter (BCD): 4x94/96mm Compatibility: 94/96mm - all symmetrical 4 arm 94mm bolt circle diameter (BCD) cranks (SRAM X01, X1, GX), all symmetrical 4 arm 96mm BCD cranks (Shimano compact triple M782, M672, M622, M612); 104mm - all 104mm BCD cranks Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit Perfect 49mm chainline with 2mm Shims included for a quieter drivetrain, improved chainring wear and best no drop performance Subtly slotted bolt holes allow for a perfect fit with both 94 and 96 BCD symmetrical crank arms Reuse your existing 8-10mm long ring hardware - no new bolt packs required Aggressive crud chamfers for awesome mud shedding performance and extended ring life Reinforced wide tooth design provides maximum ring durability when run without a bash guard 104-30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible Weight: 94mm - 43g (30T), 49g (32T), 58g (34T); 96mm - 43g (30T), 49g (32T), 58g (34T); 104mm - 40g (30T), 44g (32T), 54g (34T), 2g (4x shims) Please Note: NOT compatible with 10-Speed Shimano XT armsets and also NOT compatible with 12 Speed Shimano/Hyperglide Chains.Please Note: Shims are included with ring. For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions, shims under the bolt heads allow reuse of your 3x hardware.Buy OneUp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Standard Wide Full Length Mudguard Set700c/27 inch41mmStandard Wide.
Park Tool Storage Hook - Wood ThreadPark Tool Threaded Storage Hook 451Park Tool Storage Hooks are pefect for hanging bikes, wheels, etc. Vinyl coated to prevent scratching.Features:Wood threaded Made from 5/16" steel rodBuy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Peaty s Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup Peaty s Rim Tape, MK2 Tubeless Valves and Holeshot Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.Includes Peaty's latest silver-printed Tubeless Rim TapeBlack MK2 Tubeless Valves and Holeshot Biofibre Tubeless SealantPresented in specially-designed recycled packaging with a handy setup guide on the box and QR links to step by step videos for each stage of installationIdeal for riders wanting to spend more time on the bike and less time fixing puncturesPeaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits are available in a variety of configurations so that you can ride with the perfect tubeless set up whatever your discipline: Road, Gravel, XC, Enduro, Downhill all good to go. Every conversion kit features a handy installation guide on the box, with QR links to step by step installation for each stage of installation rest assured that the installation process will be slick and swift.Available in 4 flavours:Road/Gravel: 21mm tape / 60mm valves / 120ml SealantXC/Trail: 25mm tape / 42mm valves / 240ml SealantDH/Enduro: 30mm tape / 42mm valves / 240ml SealantDH Wide: 35mm tape / 42mm valves / 240ml Sealant
Prime CR-MO Sport Road Bike SaddleThe Prime CR-MO Sport Saddle is shaped for comfort in a relaxed, slightly more upright cycling posture. In this position, as the angle between the spine and the legs is reduced, the pelvis may tilt forward slightly into its natural comfortable position. Also, as the pelvis tilts forward, a central channel and cut-out zone in the base alleviates pressure in the soft tissue in front of the sit bones.The shallow convex profile and raised rear edge combined with an increased surface area provide a stable platform to support the sit bones. The curved wings allow clearance for the inner thigh as you pedal, and beneath the waterproof microfibre cover, a layer of high-density PU foam padding provides additional cushioning and pressure relief.The CR-MO rails also feature measurement markers. These help you adjust the fore/aft position of your saddle accurately to achieve an efficient and ergonomic pedalling motion.Features:Shallow convex profile with pressure relief channelNylon fibre base with cut-out zone for pressure reliefWaterproof microfibre coverDurable CR-MO Rails with measurement markersHigh-density PU foam paddingWeight: 252gBuy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime TI Road SaddleThe Prime TI Road Saddle can be used across a range of cycling disciplines and with its minimalist, lightweight construction, it's ideal for high mileage use. It features a shallow convex shape, which supports the sit bones when riding in an aero position. Plus, thanks to a cut-out zone in the base, the pressure is relieved from the perineum when riding upright.Highly VersatileTruly a great all-rounder, the TI Road saddle suits most rider types. For cyclists with a flexible lower back, it supports sit bones when the pelvis is upright and those with a less flexible back, the pelvis may tilt forward. The slight curve and cut-out on the base ensures the inner thigh area has plenty of clearance for comfortable and efficient pedalling.Efficient and DurableFeaturing titanium alloy rails with a chromium nitride (CrN) coating, you've got excellent tensile strength, rigidity and corrosion resistance, plus a very low weight. These high-quality rails also increase the durability of the saddle, as they are far less able to flex and creak as you're riding. The rail's strength and lack of bulk help you to save energy when conquering a long climb or putting in a big effort when accelerating up to top speed.Features:Cover: Waterproof microfibre coverBase: Nylon fibre base with cut-out for pressure relief Rail Material: Titanium alloy with CrN (Chromium Nitride) coating Rail fore/aft measurement markersShallow convex profile Dimensions: 275x134mm Weight: 224gBuy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime TI Endurance Road SaddlePrime's TI Endurance Road Saddle offers enduring comfort when you're taking on epic distances. It features lightweight titanium rails and a wide and shallow convex shape. Plus, at the base, there's a cut-out section to relieve pressure on key areas.Endurance-specificDesigned for riding long distances over many hours on the bike. The TI Endurance's profile is optimised for use along with sportive, touring and gravel/adventure bikes. These types of bikes feature higher front ends to offer a more relaxed riding position, in which the lower back follows a less aggressive curve to the handlebars. Combining them with the TI Endurance saddle will help you to remain relaxed throughout your ride.Efficient and DurableFeaturing titanium alloy rails with a chromium nitride (CrN) coating, you've got excellent tensile strength, rigidity and corrosion resistance, plus a very low weight. These high-quality rails also increase the durability of the saddle, as they are far less able to flex and creak as you're riding. The rail's strength and lack of bulk help you to save energy when conquering a long climb or putting in a big effort when accelerating up to top speed.Features:Cover: Waterproof microfibre coverBase: Nylon fibre base with cut-out for pressure relief Rail Material: Titanium alloy with CrN (Chromium Nitride) coatingShallow convex profile Rail fore/aft measurement markers Dimensions: 277x145mm Weight: 226gBuy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prime Race Carbon Rail Road Bike SaddleThe profile of the Prime Race Saddle is carefully optimised for comfort in a tucked aerodynamic position. For riders with a flexible lower back, the pelvis remains in a more level stance in the cycling posture. The flat profile is designed to support weight through the sit bones in this position. A deep pressure relief channel with cut-out zone eliminates pressure on the softer tissue for extended comfort. The 140mm width has been tailored to accommodate the spacing of the sit bones with sufficient area to distribute pressure and offer comfort and stability. The shape quickly graduates to a narrow 40mm nose to eliminate interference with the inner thigh during the pedal stroke.Prime UD carbon fibre rails are engineered to deliver a weight saving advantage with calibrated stiffness for vibration damping. Prime’s seat rails also feature measurement markers. These help you adjust the fore/aft position of your saddle accurately to achieve an efficient and ergonomic pedalling stance.Finally, beneath the waterproof microfibre cover is a layer of high-density EVA foam padding. This works in combination with the nylon fibre base to provide a firm, minimally cushioned platform with a small degree of flex. Features:Flat profile optimised for tucked aerodynamic positioningLightweight UD carbon fibre rails with fore/aft measurement markersDeep pressure relief channel with cut-out zone for extended comfortNylon fibre base Narrow nose reduces contact with the inner thighHigh-density EVA foam paddingWeight: 200gBuy Prime Components from Chain Reaction Cycles, the World's Largest Online Bike Store.