The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
The Rockshox Lyrik receives a complete overhaul for 2023, that keeps all the stiffness and brawn of the older Lyrik in a lighter, sleeker chassis. Packed with innovative features, including a new Charger 3 damper, Pressure Relief Valves and vibration reducing ButterCups, the Lyrik Ultimate is the just that; the ultimate all-round suspension fork!All-new 35mm chassis is lighter but just as stiff and strong as previous designNew Charger 3 damper provides smooth, consistent control and easy adjustabilityNew DebonAir+ spring gives a super supple ride over smaller bumpsDamper and air spring feature new ButterCups that block 20% of unwanted trail chatterSuitable for 110x15m axles - can be used with Torque Caps or standard hubsThe Lyrik is the ultimate all-rounder; if you like to charge the downs and monster the biggest climbs in the same ride then the Lyrik is the fork for you. The all-new chassis is still based around 35mm stanchions, but is lighter than before while still being just as stiff and burly enough to send the gnarliest lines. To back up the new chassis is the new Charger 3 damper which features and all-new Internal Floating Piston (IFP) with high/low-speed compression and rebound adjustment that provides effortless control and easily adjustability, so you can be sure that it can tackle even the sketchiest of line choices and keeps your wheel glued to the ground. Also new is the DebonAir+ spring which helps to iron out everything on the trail, from the smallest chatter through to the biggest hits. Both the Charger 3 damper and DebonAir+ spring feature Rockshox's new ButterCups. Mounted in a rigid gold housing, these two rubber pucks absorb high frequency vibrations and block 20% of unwanted trail chatter , reducing hand and arm fatigue, leaving you fresher to attack the trail for longer. If you're looking for the most capable fork around that really can do it, look no further than the Rockshox Lyrik!
Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride. MTB Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-20-235 Black 29" QR110 160mm 51mm 910-20-234 Orange 29" QR110 160mm 44mm 910-20-233 Black 29" QR110 160mm 44mm 910-20-242 Black 27.5" QR110 160mm 44mm 910-20-241 Black 27.5" QR110 160mm 37mm 910-20-240 Orange 27.5" QR110 160mm 44mm 910-20-236 Black 29" QR110 150mm 44mm
This high-quality mountain bike (MTB) suspension fork is part of the prestigious Factory Series, which means it comes trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails to modern enduro racing, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float EVOL air spring and GRIP2 damper with Variable Valve Control (VVC) for undisputed tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Coming complete with 160mm travel as well as many of the brand's finest technologies, this is a great choice of upgrade for conquering everywhere from big backcountry routes to the EWS circuit. MTB Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Elite Series: Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodised stanchions instead of Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. GRIP2: High-speed compression now with patented VVC (Variable Valve Control). GRIP2 is Fox Suspension's next-evolution sealed cartridge FIT system, the brand's highest-performing gravity-focused damper. Manufacturer's Part Numbers: 910-20-239 Black 27.5" QR110 160mm 44mm 910-20-232 Black 29" QR110 160mm 44mm
The Scout 275 Race features Nukeproof's custom triple-butted hydro-formed alloy Scout frame equipped with a reliable and affordable components package. RockShox Recon Silver 140mm-travel forks soak up bumps and knocks from the terrain while a Shimano Deore 1x10-Speed groupset with an 11-46T wide-range cassette and hydraulic disc brakes powers your cycling adventure with efficient gear shifting and reliable all-weather braking performance. This stylish hardtail mountain bike (MTB) also rolls fast and stable upon Tubeless Ready Nukeproof Neutron V2 hubs and WTB ST i30 TCS rims wrapped in high-grip Schwalbe Magic Mary and Hans Dampf tyres. The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn’t underestimate what this hardtail is truly capable of. The all-new Scout is a graduate of the school of gravity. Its geometry is on the “aggressive” side of the coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof’s Saddle Offset theory, will propel you efficiently up the trail-ready for the gnarliest descent you can handle. The new geometry adds to the all-around capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame that is ready to scout out endless singletrack, session technical enduro trails or just hoon around like you’re auditioning for the latest “Scoutin’ About” video epic. The Nukeproof Scout is the embodiment of the Nukeproof attitude. When riding a Scout, you become part of something special and every ride of this hardcore hardtail rewards every last drop of your skill and commitment. You are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership. The New Scout, welcome to the world of Scoutin’ About, it really is an attitude. The 3rd generation of the Scout has been tweaked to be the finest vintage of Scout. Key Upgrades Include: All-New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails The all-new Nukeproof Scout builds on the cult-like “Scoutin’ About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikers Features: Frame: Nukeproof Scout 275, custom triple butted hydro-formed Alloy, internal cable routing for dropper seat posts, ISCG 05 mount, threaded 73mm BB, Boost 148mm rear axle spacing, includes 3D Contoured Rubber Frame Protection for Down Tube, Seat Tube and Chain Stay Fork: RockShox Recon Silver RL 140mm, 46mm Offset, Solo Air, Gloss Black Front Wheel: Nukeproof Neutron V2 Hub 15x110mm, built onto a 27.5” WTB STi30 TCS 2.0Rim, 32H Rear Wheel: Nukeproof Neutron V2 Hub 148x12mm, Shimano freehub with 36 points of engagement, built onto a 27.5” WTB STi30 TCS 2.0Rim, 32H Tyres: Front: Schwalbe Magic Mary, Snakeskin, TL Easy, Addix Soft, 27.5x2.6"; Rear: Schwalbe Hans Dampf, Snakeskin, TL Easy, Addix Speedgrip. 27.5x2.6" Crankset: Raceface Aeffect 10 Speed Crank, 170mm Shifter: Shimano M4100-R Deore 10-Speed, (I-Spec EV) Rear Derailleur: Shimano M5120 Deore 10-Speed Chain: KMC X10 10-Speed, with Quick Link Cassette: Sunrace CSMS2 10-Speed, 11-46T Black Brakes: Shimano MT4100 Lever with Shimano MT410 2 Pot Caliper, Resin Pads Front Rotor: Shimano SM-RT56, 180mm Rear Rotor: Shimano SM-RT56, 180mm Handlebars: Nukeproof Neutron V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Neutron AM, 45mm, Black Saddle: Nukeproof Neutron, Black Seatpost: Nukeproof Neutron, Black, 31.6mm, 450mm Headset: Nukeproof Warhead, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: TBC Specification: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm Axle to Crown: 529mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Max Chainring: 34T (32T Oval) Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The 2021 GT Speed Series frame is stronger, stiffer and better looking than ever before! With double wall rims , strong chromoly forks, and sealed bearings all round, and Promax hydro disk brakes, the GT Speed Series is ready for whatever the track can through at it. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium, Alloy Formed and Butted Speed Metal Tubes WHEEL SIZE: 20" TOP TUBE LENGTH: 21.25" CHAIN STAY LENGTH: 14.92" HEAD TUBE ANGLE: 72° SEAT TUBE ANGLE: 72° FORKS: GT BMX Pro Race, 100% Cr-Mo 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Speed Cr-Mo 8.375”H x 29”W, 8° Sweep, 4° Up, Taper Cross Bar STEM: Promax Impact Top Load, 53mm HEADSET: 1-1/8”-1.5” Taper Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Promax Hydro Disc Rear, 140mm Rotor (Rear Only) FRONT HUB: GT Speed Series, Alloy CNC Body, Sealed Bearings, 28h, 3/8” Female Allen Bolts FRONT RIM: Alloy Double Wall, 36h REAR HUB: GT Speed Series Disc Cassette, Alloy CNC body, 4 Sealed Bearings, 6 Pawl 72point Alloy Shimano Cassette, 36h, 3/8” Female Allen Bolts w/ Alloy Washers REAR RIM: Alloy Double Wall, 36h TYRES: Kenda Kompact Pro Race 20 x 1.75” SPROCKET: 44T AL CNC Chain Ring CRANKS: GT Forged Alloy 2pc., 175mm Arms, 24mm Hollow/ Cr-Mo Spindle BB: BB86 PEDALS: TBC SEAT: BOX Echelon GEARING: 44/16 WEIGHT: TBC ###section### Product Highlights Pro sized BMX race bike for riders who need a full size BMX. Typically suited to riders 5ft 3" to 5ft 8" (160cm - 175cm) A BMX race specific bike perfect for racers who want to take it to the next level Lightweight aluminium construction Rear disc brake Tapered headtube ###shogun-image-section###
The 2021 GT Speed Series frame is stronger, stiffer and better looking than ever before! With double wall rims , strong chromoly forks, and sealed bearings all round, and Promax hydro disk brakes, the GT Speed Series is ready for whatever the track can through at it. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium, Alloy Formed and Butted Speed Metal Tubes WHEEL SIZE: 24" TOP TUBE LENGTH: 21.75" CHAIN STAY LENGTH: 15.43" HEAD TUBE ANGLE: 73° SEAT TUBE ANGLE: 70° FORKS: GT BMX Pro Race, 100% Cr-Mo 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Speed Cr-Mo 8.375”H x 29”W, 8° Sweep, 4° Up, Taper Cross Bar STEM: Promax Impact Top Load, 53mm HEADSET: 1-1/8”-1.5” Taper Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Promax Hydro Disc Rear, 140mm Rotor (Rear Only) FRONT HUB: GT Speed Series, Alloy CNC Body, Sealed Bearings, 28h, 3/8” Female Allen Bolts FRONT RIM: Alloy Double Wall, 36h REAR HUB: GT Speed Series Disc Cassette, Alloy CNC body, 4 Sealed Bearings, 6 Pawl 72point Alloy Shimano Cassette, 36h, 3/8” Female Allen Bolts w/ Alloy Washers REAR RIM: Alloy Double Wall, 36h TYRES: Kenda Konversion Pro Race, 24 x 1.75” SPROCKET: 41T AL CNC Chain Ring CRANKS: GT Forged Alloy 2pc., 180mm Arms, 24mm Hollow/ Cr-Mo Spindle BB: BB86 PEDALS: TBC SEAT: BOX Echelon GEARING: 41/18 WEIGHT: TBC ###section### Product Highlights Cruiser BMX Race bike with larger 24" wheels. A BMX race specific bike perfect for racers who want to take it to the next level Lightweight aluminium construction Rear disc brake Tapered headtube ###shogun-image-section###
The 2021 GT Speed Series frame is stronger, stiffer and better looking than ever before! With double wall rims , strong chromoly forks, and sealed bearings all round, and Promax hydro disk brakes, the GT Speed Series is ready for whatever the track can through at it. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium, Alloy Formed and Butted Speed Metal Tubes WHEEL SIZE: 20" TOP TUBE LENGTH: 21.75" CHAIN STAY LENGTH: 15.43" HEAD TUBE ANGLE: 72° SEAT TUBE ANGLE: 72° FORKS: GT BMX Pro Race, 100% Cr-Mo 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Speed Cr-Mo 8.375”H x 29”W, 8° Sweep, 4° Up, Taper Cross Bar STEM: Promax Impact Top Load, 53mm HEADSET: 1-1/8”-1.5” Taper Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Promax Hydro Disc Rear, 140mm Rotor (Rear Only) FRONT HUB: GT Speed Series, Alloy CNC Body, Sealed Bearings, 28h, 3/8” Female Allen Bolts FRONT RIM: Alloy Double Wall, 36h REAR HUB: GT Speed Series Disc Cassette, Alloy CNC body, 4 Sealed Bearings, 6 Pawl 72point Alloy Shimano Cassette, 36h, 3/8” Female Allen Bolts w/ Alloy Washers REAR RIM: Alloy Double Wall, 36h TYRES: Kenda Kompact Pro Race 20 x 1.75” SPROCKET: 44T AL CNC Chain Ring CRANKS: GT Forged Alloy 2pc., 175mm Arms, 24mm Hollow/ Cr-Mo Spindle BB: BB86 PEDALS: TBC SEAT: BOX Echelon GEARING: 44/16 WEIGHT: TBC ###section### Product Highlights Pro sized BMX race bike for riders who need a full size BMX. Typically suited to riders 5ft 3" to 5ft 8" (160cm - 175cm) A BMX race specific bike perfect for racers who want to take it to the next level Lightweight aluminium construction Rear disc brake Tapered headtube ###shogun-image-section###
The 2021 GT Speed Series frame is stronger, stiffer and better looking than ever before! With double wall rims , strong chromoly forks, and sealed bearings all round, and Promax hydro disk brakes, the GT Speed Series is ready for whatever the track can through at it. ###section### Product Specs FRAME MATERIAL: 6061 T6 Aluminium, Alloy Formed and Butted Speed Metal Tubes WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 14.92" HEAD TUBE ANGLE: 72° SEAT TUBE ANGLE: 72° FORKS: GT BMX Pro Race, 100% Cr-Mo 1 1/8” Steerer, Tapered Legs, 3/8” Dropouts BARS: GT Speed Cr-Mo 8.375”H x 29”W, 8° Sweep, 4° Up, Taper Cross Bar STEM: Promax Impact Top Load, 53mm HEADSET: 1-1/8”-1.5” Taper Integrated Design, 45X45 Degree Sealed Bearings BRAKE MOUNTS: Welded BRAKES: Promax Hydro Disc Rear, 140mm Rotor (Rear Only) FRONT HUB: GT Speed Series, Alloy CNC Body, Sealed Bearings, 28h, 3/8” Female Allen Bolts FRONT RIM: Alloy Double Wall, 36h REAR HUB: GT Speed Series Disc Cassette, Alloy CNC body, 4 Sealed Bearings, 6 Pawl 72point Alloy Shimano Cassette, 36h, 3/8” Female Allen Bolts w/ Alloy Washers REAR RIM: Alloy Double Wall, 36h TYRES: Kenda Kompact Pro Race 20 x 1.75” SPROCKET: 44T AL CNC Chain Ring CRANKS: GT Forged Alloy 2pc., 175mm Arms, 24mm Hollow/ Cr-Mo Spindle BB: BB86 PEDALS: TBC SEAT: BOX Echelon GEARING: 44/16 WEIGHT: TBC ###section### Product Highlights Pro sized BMX race bike for riders who need a full size BMX. Typically suited to riders 5ft 3" to 5ft 8" (160cm - 175cm) A BMX race specific bike perfect for racers who want to take it to the next level Lightweight aluminium construction Rear disc brake Tapered headtube ###shogun-image-section###
Jake Seeley's Street Sweeper bike is built around his all-new chromoly aftermarket signature frame and designed with serious street riders in mind. That signature Jake Seeley frame uses a 75.25° head tube angle, a very short chainstay and a higher bottom bracket that perfectly matches Jake's technical riding style. It features 4-piece bars, 160mm cranks, sealed Odyssey Clutch freecoaster and Sunday Street Sweeper Tyres to make this a truly pro-level bike that's ready to hit the streets. ###section### Product Specs FRAME MATERIAL: 100% Chromoly WHEEL SIZE: 20" TOP TUBE LENGTH: 20.75" CHAIN STAY LENGTH: 12.7" - 13" HEADTUBE ANGLE: 75.25° SEAT TUBE ANGLE: 71° FORKS: Sunday Pro, 20", 100% chromoly fork w/1-piece steerer tube and welded pre-load BARS: Sunday, 100% chromoly, 4-piece with bar pad STEM: Sunday Freeze top load, 48mm HEADSET: FSA integrated conical, 1-1/8" BRAKE MOUNTS: BRAKES: Odyssey Springfield U-brake FRONT HUB: Sunday, 36H, low-flange, sealed, 3/8" female axle FRONT RIM: Odyssey Quadrant, 20", 36H REAR HUB: Odyssey Clutch V2 Freecoaster, 36H, 14mm female axle w/9T driver, non-drive PC guard REAR RIM: Odyssey Quadrant, 20", 36H TYRES: Sunday Street Sweeper V2, 20" x 2.4" (Front & Rear) SPROCKET: Sunday Sabretooth V2, 25T, 6061 aluminium CRANKS: 160mm, 3-piece, chromoly BB: Sealed, Mid, 19mm PEDALS: Odyssey Twisted PC Pro SEAT: Sunday Seeley, Pivotal GEARING: 25/9 WEIGHT: 24.97lbs ###section### Product Highlights Signature model bike Fitted with high-quality aftermarket components High-quality Chromoly construction ###shogun-image-section###
Fly's top of the line street machine in a Freecoaster version with 4-piece bars inspired by Devon Smillie, 25mm fork offset, Fuego tyres, Savanna seat, Volcano ST stem, Tractor XL 25T sprocket and 4 nylon pegs with guards. ###section### Product Specs FRAME MATERIAL: FULL 4130 CRMO WHEEL SIZE: 20" TOP TUBE LENGTH: 21" CHAIN STAY LENGTH: 13" HEADTUBE ANGLE: 75.5° SEAT TUBE ANGLE: 71° FORKS: INTEGRATED CONE SHAPE DESIGN / FULL 4130 CRMO / 1 PIECE STEERER TUBE CNC BARS: FULL 4130 CRMO STEM: FLY VOLCANO 35MM RISE / 48MM REACH / 6061-T6 ALUMINUM CNC MACHINED HEADSET: TREBOL / SEALED BEARING / CNC MACHINED / 6061-T6 ALUMINUM BRAKE MOUNTS: Removable BRAKES: TREBOL SPRINGHANGER / FORGED / 6061 T-6 ALUMINUM FRONT HUB: TREBOL FEMALE / SEALED BEARING / 3/8” FEMALE AXLE / 36H FRONT RIM: FLY PIRAMIDE / DOUBLE WALL / 6061 T-6 ALUMINUM REAR HUB: TREBOL FREECOASTER / SEALED BEARING / 14MM AXLE / 36H / 9T REAR RIM: FLY PIRAMIDE / DOUBLE WALL / 6061 T-6 ALUMINUM TYRES: FLY FUEGO 2.30 FRONT & REAR / 60 TPI / 120 PSI SPROCKET: FLY TRACTOR XL / 7075-T6 ALUMINUM CNC MACHINED / 25T CRANKS: TREBOL 3PC / 4130 CRMO / 165 MM ARM LENGTH BB: MID / SEALED BEARING PEDALS: FLY RUBEN GRAPHITE / NYLON - FIBERGLASS COMPOUND SEAT: FLY SAVANNA TRIPOD / 100% SYNTHETIC LEATHER / 25 MM THICKNESS GEARING: 25/9 WEIGHT: 11.5 KG / 25.3 LB ###section### Product Highlights Longer top tube is great for taller riders who need a bit more room (6ft / 180cm plus) Designed to excel at Street riding thanks to responsive geometry but will feel at home in any riding environment Allows for more fakie tricks thanks to the Freecoaster rear hub Filled With Aftermarket parts Great For Grinding - 4 Pegs Included ###shogun-image-section###