The XM45 Wheelset is the perfect entry-level wheelset or a great back up wheelset for when you're in need of a spare wheel. It has a 23c section rim with a convertible UST reinforcing sleeve for mounting tubeless ready tyres.The aluminium hubs are light and efficient and run on ultra-smooth bearings, to make sure you're riding as quick as possible. Miche proudly use Sapim spokes on their wheels due to the strength and reliability that Sapim are known for. The XM45 wheelset uses stainless steel J-Bend spokes and lace them so they're optimised for each wheel size, meaning that whichever size you buy, you'll get one taylor built specifically for that size. The front hub comes with 9mm QR adaptors fitted, remove the adaptors for use with a 15mm Bolt-Thru system.Weight: 2013g Hubs: Body: Al 6061 T6,Axle Material: Al 7075 T6,Bearings: Miche,Adjustment system: Smoothness adjustment ring,Freewheel body: AL 7075 T6,Compatibility: Sh - 8/9/10/11x,O.L.D: 100mm / 135mm,QR Type: Quick Release or 15mm BT Front,. Rim: Material: Lightweight Alloy,Depth: 21mm, Width: Outer 27mm / Inner 23mm,. Spokes: Material: Aisi 302 stainless steel (Sapim),Shape: J-Bend, flat,Nipples: Brass (Sapim),Spoke number: 28 front / 28 rear,Spoke Pattern: Crossed x2,. Supplied with: XR Quick Release skewers/QR front hub adaptors, Instructions and maintenance book
With a new, lighter weight 32mm carbon rim and easier to use Road Tubeless technology, this superlight disc-brake wheel is an instant performance boost, especially on steep climbsWhen you’re gunning for the KOM on the toughest mountain climbs, nothing gives you more of a boost than a light and snappy carbon wheelset. This newcomer in the Cosmic family takes over the venerable Ksyrium Pro Carbon SL Disc. It features a reengineered carbon rim that’s the lightest in its category. Its 32mm airfoil shape slices through wind, and because the rim is made specifically for disc brakes, you’ll have more confidence and control on the descents.The rim is crafted with a new laminate and our exclusive Fore Carbon technology that leaves the upper rim bridge intact and reinforces the rim only where needed. This saves 40g per wheel. The spokes attach to the rim without any need to drill the upper rim bed, so no rim tape is required. That means more weight savings (30g per wheel) and less hassle. The new shape of the rim bed makes it easier than ever to mount and remove tires, and you get super low rolling resistance with our UST Tubeless setup. No tube means no friction, and more air volume means a smoother, faster ride. It also uses our patented elliptical spokes to save another 5 watts and make you faster.Our new Infinity hub platform optimizes spoke lacing for efficient power transfer through highly controlled spoke tension. Our Instant Drive 360 freewheel, coupled with our automatic bearing preload adjustment (QRM Auto), provides fast engagement, high stiffness and added durability. It's available for Shimano and SRAM XD-Road and can convert to Campagnolo with an optional driver body. It's compatible with 12x100 axle up front, 12x142 rear, and you can convert to Quick Release with the supplied adapters. For Center Lock disc rotors only.These wheels are designed, engineered and patented by Mavic in Annecy, France, and are 100% handmade in our European carbon factory.Key benefitsInstant acceleration, improved climbing capabilities32mm deep/28mm wide NACA profile optimized for disc brakes Fore Carbon spoke attachment saves 40g and eliminates rim tape (another 30g saved per wheel) Patented lightweight aero spokesStiffer wheel for improved power transferFore Carbon technology keeps the rim upper bridge solid and makes the rim stiffer New Infinity hub plaform: stiff axle, durable bearings and new hub design with optimized lacing and spoke tension ID360 freewheel technology for instant power transferImproved UST Road delivers more speed, comfort and control in an easy to use tubeless systemNo tubes means less friction, better efficiency and grip, a reduced risk of punctures New rim bed shape makes it easier to mount and change tires Fore Carbon drilling technology doesn't require the use of rim tape
Xpress wheels are made for both road and track (fixed & freewheel)The Miche X-Press Track wheelset is a fixie-style wheel with a medium-profile alloy rim. They have a double thread on the large-flange hub that can be used for either a fixed sprocket or freewheel, so they offer great versatility. Cross spoke lacing on both the front and rear wheels ensures rigidity and resistance, while the all black finish gives a distinctive 'street' look and feel.Assembly involves careful spoke lacing and pre-tightening, followed by mechanical stabilisation to settle the components into position. Controls are then made for accurate dishing and lateral and vertical centring, using computerised monitoring and automated processes to guarantee optimum quality.The rims are Black anodised, clincher, medium-profile, lightweight high resistance alloy. A finely ground braking zone ensures precise and safe braking.The hubs are Lightweight, CNC-finished, anodised forged alloy body. High-precision grease-filled bearings guarantee long lasting protection and smoothness. The double-threaded rear hub accommodates a fixed sprocket or freewheel.The wheel kit includes hub nuts, sprocket lock ring, use and maintenance instructionsHubs: black,Axle: 100/120,Speeds: Fixed/Free,Rim: aluminium,Height: 28mm,Spokes: 32/32 black stainless steel,Weight: 2340g,.
Whether you’re an enduro racer or an all-mountain ripper, you need a wheel that delivers the perfect balance of strength, stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency.The Deemax Pro, weighing 1930g, gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers, including 2017/2018/2019 Enduro World Series champion Sam Hill.The rims are lightweight, yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply.The internal rim width, which affects tire shape and size, is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails.The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible, and the rear wheel comes in 12x142 or 12x148 (Boost).Ultra-responsive ride quality.28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers.ISM 4D construction, Isopulse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package.Confident handling and durability you can count on.ISM 4D rim technology minimizes weight without sacrificing strength.Maxtal alloy rims and Zicral spokes for added strength and durability.UST Tubeless for added traction and control.User-friendly tubeless technology for better traction and control with reduced risk of punctures.Wheelset ships with UST valves.
Enve Road Foundation Wheelset 45mm Enve Alloy HubKey Features:Rim Depth - 45mm (Front and Rear),Disc brake only,Internal molded spoke holes,Hole count - 24/24,Wheelset Weight -1541g,Aero optimized for 25c to 28c tubeless tires,Tubeless tire compatible only,Hookless construction,May run inner-tubes with tubeless tire,Hub - new enve foundation road alloy w/ id360 40t ratchet,Spokes - Sapim CX Sprint,(Available as complete wheelset only).
The world of Gravel riding is tough to define with every cyclist likely to do things slightly differently from one another. It is with versatility in mind that Fulcrum have designed the Rapid Red 3. This is a completely new project designed for mixed terrain, constructed from a fully CNC machined piece of aluminium, which keeps them lightweight. These wheels are designed to be versatile, light and durable. KEY FEATURES TYRE TYPE: 2-Way Fit Ready (for clincher and tubeless ready) TYRE SIZE: 650B DISCIPLINE: B-ROAD (Gravel) ASTM CATEGORY: 2 WEIGHT: 1640 g RIM MATERIAL: Aluminium (6082, T6 Pre-Aging) RIM MATERIAL DETAILS: R2-Milling PROFILE HEIGHT: Low RIM HEIGHT: Front and rear: 24 mm RIM WIDTH: 29 mm INNER RIM WIDTH (CHANNEL): 24 mm TYRE WIDTH: from 40 to 60 mm BRAKING SYSTEM: Disc brake BRAKING SURFACE/BRAKES OPTIONS: AFS DISC BRAKE OPTION FRONT AXLE COMPATIBILITY: HH12-100 REAR AXLE COMPATIBILITY: HH12-142 FRONT WHEEL SPOKES: 24 REAR WHEEL SPOKES: 24 SPOKES: MATERIAL: Stainless steel, double butted SPOKES: PROFILE: Rounded, straight pull NIPPLES: Aluminium FRONT HUB: Aluminium, oversize flange REAR HUB: Aluminium, oversize flange BEARINGS: Adjustable Cup & Cones bearing system OTHERS: Reflective stickers, Aluminium axle WEIGHT LIMIT: 120 kg (comprising cyclist, bike, equipment and luggage) FWB OPTIONS: HG11, XDr, N3W
Synthesis level 11 Enduro 29" wheelset providing control and stability for Enduro riding.Front and rear specific rims offer stiffness and compliance characteristics where they are rewarded best, while front and rear specific inner rim widths are optimized for wider tires in the front and narrower tires in the rearCrankbrothers has partnered with Industry Nine for the Synthesis 11 hub. Handbuilt in Asheville, NC, i9's Hydra hub has near instantaneous engagement offering previously unheard of responsiveness.Specific spoke counts, weights, and tensions are employed on front and rear wheels to enhance the tuned wheel system and riding experience. Synthesis wheels are built using the highest quality Sapim stainless steel spokes. Synthesis 11 series wheels are built with bladed spokes for further weight savings.Key Features:Mountain bike tuned carbon wheel system for e-bikes.,Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding.,Compliant tuned front wheel improves handling and maximizes grip and control in turns.,Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed..Specifications:Engagement: 17º six pawls,ETRTO: 622mm (29),Hub: crankbrothers Synthesis standard,Inner Rim Width: Front 31.5mm, Rear 31.5mm,Outer Rim Width: Front 38.7mm, Rear 39.5mm,Rim Height 18.75mm,Spoke Count: Front 32, Rear 32,Spoke Type: ,Warranty: Lifetime (rim only).
Enve Road Foundation Wheelset 65mm Enve Alloy HubKey Features:Rim Depth - 65mm (Front and Rear),Disc brake only,Internal molded spoke holes,Hole count - 24/24,Wheelset Weight - 1621g,Aero optimized for 25c to 28c tubeless tires,Tubeless tire compatible only,Hookless construction,May run inner-tubes with tubeless tire,Hub - new enve foundation road alloy w/ id360 40t ratchet,Spokes - Sapim CX Sprint,(Available as complete wheelset only).
The Racing 6 represents the initial offering from the Fulcrum line-up and brings the highly respected quality from the rest of the range and offers it to a wider audience. The classic style hub with J-bend spokes adds an air of classic performance and reliability to a new and modern wheelset.At a very interesting 1760gr for a pair of road wheels the Racing 6 is a perfect solution for not only great training wheels but a great way to enter into the world of Fulcrum quality wheels for those sportive riders looking for something more. 2-Way Fit Ready™ construction makes for a very versatile package at an initial offering price point.Key Features:Tyre Type: 2-Way Fit™ Ready,Discipline: Road,Weight: 1760g,Rim material: Aluminum,Rim height: Front 24.5mm and rear 27.5mm,Rim width: 23mm,Tyre Width: From 25mm to 50mm,Compatibility: QR/HH15-100/HH12-100 (no skewers incl.).
This is the entry-level model of the Racing DB family which guarantees performance and reliability at a budget friendly price.The great versatility of these wheels, whether training or on road rides with a gravel bike, is ensured by the new low profile 24 mm aluminium rims and an inner rim channel of 20 mm, with the 2 Way Fit system. The technical specifications of the Racing 6 DB ensure that they excel in different situations, climbing as well as windy conditions, and they can also fit wider tyres, clincher or tubeless (tubeless tape installed and valves included). KEY FEATURESTYRE TYPE: 2-Way Fit™ Ready (Clincher/Tubeless ready) ,TYRE SIZE: 700c ,DISCIPLINE: Road ,ASTM CATEGORY2 ,WEIGHT: 1780 g ,RIM MATERIAL: Aluminium ,RIM MATERIAL DETAILS: Aluminium ,PROFILE HEIGHT: Low ,RIM HEIGHT: Front and rear 24 mm ,RIM WIDTH: 25 mm ,INNER RIM WIDTH (CHANNEL): 20 mm ,BRAKING SYSTEM: Disc brake ,BRAKING SURFACE/BRAKES OPTIONS: AFS ,FRONT AXLE COMPATIBILITY: HH12-100 ,REAR AXLE COMPATIBILTY: HH12-142 ,FRONT WHEEL SPOKES: 24 (16 left - 8 right) ,REAR WHEEL SPOKES: 24 (8 left - 16 right) ,SPOKES: MATERIAL: Stainless steel ,SPOKES: PROFILE TECHNOLOGY: Rounded, Straight-pull ,NIPPLES: Brass ,FRONT HUB: Aluminium, Aluminium flanges ,REAR HUB: Aluminium, Aluminium flanges ,BEARINGS: Sealed cartridge bearings ,OTHERS/WEIGHT LIMIT: 120 kg (system) ,FWB VERSION: HG11, XDR, N3W.
The best wheel choice for riding unpredictable roads is one you can fully trust and forget. That’s the Allroad S. A perfect choice for gravel rides, road rambles, bikepacking trips or fast daily commutes, it’s 100g lighter than its predecessor, the Allroad.The lightweight aluminum rims are plenty wide (22mm internal) and compatible with tubeless tires from 28mm to 64mm for a smooth, efficient ride quality. Our UST system has been improved with a new rim bed shape that makes it easier than ever to install and change tires. Fore technology attaches the spokes to the rim without the need to drill the upper rim bed, so no tape is required. No hassles, no added weight.Our new Infinity hub platform optimizes spoke lacing with highly controlled tension for maximum power transfer, and the Instant Drive 360 freewheel, coupled with our automatic bearing preload adjustment (QRM Auto), provides fast engagement, stiffness and added durability.Matte painted hubs, invisible rim welding and deep black spokes give this wheelset a premium look that stands out from the crowd. The wheels use center-lock brake rotor compatibility and are available with Shimano or SRAM XD-Road driver bodies and can convert to Campagnolo with an optional driver body. The front hub is a 12mm thru-axle that can convert to 15mm or quick release. The rear is a 12x142 and can also convert to quick release.Ride smoother and faster on rough roads, gravel and dirt22mm wide UST rims integrated for a smooth ride with a wide range of tubeless tires from 28mm-64mmUST Road Tubeless lets you run lower tire pressure for comfort and control on rough roadsNo tubes means less friction, better efficiency and grip, and pinch-flat protectionLightweight and durableLightweight, flat spokes and ID360 freewheel technology for reliable lightweight performanceAutomatic bearing preload (QRM Auto) requires no adjustment and guarantees long-term durabilityFore drilling doesn't require the use of rim tape - 30g saved per wheelLaterally stiff and vertically compliant for a dynamic ride qualityFore technology keeps the rim upper bridge solid to make the rim stiffer17mm axle and new hub designID360 freewheel technology is 12mm compatible, convertible to quick release (15mm axle option through axle replacement)
Ksyrium has always represented the best of aluminum wheel technology. Following in the footsteps of the venerable Ksyrium Elite and Ksyrium Pro, the all-new Ksyrium SL Disc lives up to that standard. If you're looking for one aluminum wheelset for weekend races and training mileage, wherever the road takes you, this is your best choice.This new wheel is superlight (120g lighter than the former Ksyrium Elite UST Disc) and durable as ever thanks to our patented ISM4D technology. This manufacturing process removes all excess material between each spoke hole while keeping the rim wall thick enough where spoke tension and stress is the highest. Those rims are made in France, in our aluminum rim factory.The double-butted spokes contribute to the weight reduction while making the wheel more responsive. These spokes also have a patented elliptical shape that can save 5 watts for added efficiency.Stiffness is optimized using Fore technology. The upper bridge is not drilled, so it remains strong and rigid and doesn’t require the use of a rim tape (another 30g saved per wheel). The rim bed’s new shape makes it easier than ever to mount and remove tires, and our UST Tubeless technology improves rolling resistance and grip while reducing the risk of punctures. Our new Infinity hub platform optimizes stiffness and power transfer with highly controlled spoke tension, while an Instant Drive 360 freewheel coupled with our automatic bearing preload adjustment (QRM Auto) delivers fast engagement and durability. Engineered specifically for disc brakes, the wheels are compatible with a 12x100 axle up front, and 12x142 rear and can convert to Quick Release with supplied adapters. For Center Lock disc rotors only. It's available for Shimano or Sram XD-Road cassettes and can convert to Campagnolo with an optional driver body. Superlight and durable for everyday performanceISM4D rim weighs only 400gPatented lightweight aero spokes and 22mm deep/19mm wide rims keep inertia low and control highSolid upper rim bridge eliminates the need for rim tape, saves 60gLaterally stiff, vertically compliant for a more dynamic rideFore technology keeps the rim upper bridge solid to make the rim stifferNew Infinity hub plaform: stiff axle, durable bearings and new hub design guarantees wheel stabilityID360 freewheel technology for improved power transferImproved UST Road delivers more speed, comfort and control in an easy to use tubeless systemNo tubes means less friction, better efficiency and grip, a reduced risk of puncturesNew rim bed shape makes it easier to mount and change tiresFore drilling technology doesn't require the use of rim tape