Synthesis level 11 enduro wheelset with 29" front wheel and 27.5" rear wheel.Front and rear specific rims offer stiffness and compliance characteristics where they are rewarded best, while front and rear specific inner rim widths are optimized for wider tires in the front and narrower tires in the rearCrankbrothers has partnered with Industry Nine for the Synthesis 11 hub. Handbuilt in Asheville, NC, i9's Hydra hub has near instantaneous engagement offering previously unheard of responsiveness.Specific spoke counts, weights, and tensions are employed on front and rear wheels to enhance the tuned wheel system and riding experience. Synthesis wheels are built using the highest quality Sapim stainless steel spokes. Synthesis 11 series wheels are built with bladed spokes for further weight savings.Key Features: Mountain bike tuned carbon wheel system for e-bikes. , Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. , Compliant tuned front wheel improves handling and maximizes grip and control in turns. , Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed.,.Specifications: Engagement: 17º six pawls, ETRTO: 622mm (29), Hub: crankbrothers Synthesis standard, Inner Rim Width: Front 31.5mm, Rear 31.5mm, Outer Rim Width: Front 38.7mm, Rear 39.5mm, Rim Height 18.75mm, Spoke Count: Front 32, Rear 32, Spoke Type:, Warranty: Lifetime (rim only).
crankbrothers Lithium E-MTB WheelsetFeaturing a tough alloy rim construction, this electric mountain bike (E-MTB) wheelset is built to handle the higher weight and power output of electric bikes, without sacrificing the trail experience. Its hard-wearing 6061-T6 alloy build also allows it to deliver a fantastic balance of strength, durability and reliable rolling performance as you charge from trail to trail. Ready for wherever your next trail adventure takes you, crankbrothers has given this model a shot-peened and anodised finish for an additional layer of protection against wear and corrosion, making it ideal for all weather and trail conditions.Tubeless Compatible and Boost Axle SpacingDeveloped for the demands of modern trail riding, this wheelset is kitted out with a tubeless rim profile. This means you will enjoy tubeless advantages such as the ability to run lower tyre pressures for increased stability on rough terrain, extra comfort and fewer risks of flats or punctures. crankbrothers has also equipped it with Boost axle spacing for increased stiffness and balance as you tackle rock gardens, tree roots and debris on your ride.Double Butted Spokes and Shimano FreehubBenefitting from double-butted stainless steel spokes as well as a hard-wearing steel hub, this wheelset provides excellent strength, stiffness and acceleration. Its easy to service level three hub design and alloy Shimano freehub also provide straightforward maintenance and smooth rotative performance. One final highlight is its unique wheel design that evenly distributes weight closer to the hub for faster acceleration and deceleration.Features: Material: 6061-T6 Alloy with smooth weld joint Finish: Shot peen, anodised Use: Electric Mountain Bike (E-MTB) Axle: Front: 110x15mm; Rear: 12x148mm, Boost Wheel Size: 27.5" Rim Width: Inner: 35mm; Outer: 40mm Tyre Compatibility: Tubeless Type: Clincher Spokes: Stainless Steel double butted spokes (2.0 straight gauge butting) Freehub: Shimano (3-pawl, 21T, Steel, 11 speed HG mountain-style cassette compatible) Brake Type: Disc Easy to service level 3 hub design with Alloy freehub Single or Pair: PairManufacturer's Part Number: CRB-16249Buy crankbrothers Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Pro wheel-set is a light and strong build aimed at the more experienced rider. At home on your dirt bike or all mountain the 26" version is built around the thret rim. The 24" is built around the deevee rim.All our wheels are designed to be tough and good value, they are available individually allowing a mix and match approach. The range provides a choice of wheels for dirt jump, street riding, downhill or free-ride use.All the wheels include DMR rim tape (in red and black of course!) and are built to the same high quality and hand finished to high standard; stress relieved and re-tensioned to ensure a durable tough wheel. The black rims and spokes with deep red anodized hubs look the business too.26" Wheel Info:Front32 hole , Cross 3 , 990 grams20mm through axle hub, with international standard (6 bolt) disc brake mounts in a choice of red or black with matching spoke nipples.Laced onto a DMR Thret Rim using black plain gauge spokes.Rim tape included.REAR - 9 Speed32 hole , Cross 3 , 1290 grams10/135mm axle hub with fixing bolts to secure your wheel into your frame (quick release could also be used (not included), with international standard (6 bolt) disc brake mounts and a 9 speed freehub in a choice of red or black with matching spoke nipples.Laced onto a DMR Thret Rim using black plain gauge spokes.Rim tape included.Rear - 1 to 6 Speed32 hole , Cross 3 , 1340 grams10/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples. CLICK HERE for more information on this hub.Laced onto a DMR Thret Rim using black plain gauge spokes.Rim tape included.24" Wheel Info:FrontPRO level dirt jump wheel. The DV rim-braking surface is blended into the D profile of the rim. At 32mm wide this double wall section rim is single eyeleted for incredible strength. The rim has a D section giving it good radial strength for dirt jumping, BSX and street riding. Black stainless steel spokes. Red anodised 20mm cartridge bearing disc hub , converter available to fit standard 9mm drop-outs, includes DMR rim tapeREAR - 1 to 6 Speed32 hole , Cross 310/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples.Laced onto a DMR DEEVEE Rim using black plain gauge spokes.Rim tape included.NB: 9mm conversion kit available separately, the 20mm front hub does not come with this kit as standard.
The Pro wheel-set is a light and strong build aimed at the more experienced rider. At home on your dirt bike or all mountain the 26" version is built around the thret rim. The 24" is built around the deevee rim.All our wheels are designed to be tough and good value, they are available individually allowing a mix and match approach. The range provides a choice of wheels for dirt jump, street riding, downhill or free-ride use.All the wheels include DMR rim tape (in red and black of course!) and are built to the same high quality and hand finished to high standard; stress relieved and re-tensioned to ensure a durable tough wheel. The black rims and spokes with deep red anodized hubs look the business too.26" Wheel Info:Front32 hole , Cross 3 , 990 grams20mm through axle hub, with international standard (6 bolt) disc brake mounts in a choice of red or black with matching spoke nipples.Laced onto a DMR Thret Rim using black plain gauge spokes.Rim tape included.REAR - 9 Speed32 hole , Cross 3 , 1290 grams10/135mm axle hub with fixing bolts to secure your wheel into your frame (quick release could also be used (not included), with international standard (6 bolt) disc brake mounts and a 9 speed freehub in a choice of red or black with matching spoke nipples.Laced onto a DMR Thret Rim using black plain gauge spokes.Rim tape included.Rear - 1 to 6 Speed32 hole , Cross 3 , 1340 grams10/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples. CLICK HERE for more information on this hub.Laced onto a DMR Thret Rim using black plain gauge spokes.Rim tape included.24" Wheel Info:FrontPRO level dirt jump wheel. The DV rim-braking surface is blended into the D profile of the rim. At 32mm wide this double wall section rim is single eyeleted for incredible strength. The rim has a D section giving it good radial strength for dirt jumping, BSX and street riding. Black stainless steel spokes. Red anodised 20mm cartridge bearing disc hub , converter available to fit standard 9mm drop-outs, includes DMR rim tapeREAR - 1 to 6 Speed32 hole , Cross 310/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples.Laced onto a DMR DEEVEE Rim using black plain gauge spokes.Rim tape included.NB: 9mm conversion kit available separately, the 20mm front hub does not come with this kit as standard.
DMR Pro Wheels :All our wheels are designed to be tough and good value, they are available individually allowing a mix and match approach. The range gives a choice of wheels for dirt jump, street riding, downhill or free-ride use..,Build Quality And Spare PartsAll the wheels include DMR rim tape (in red and black of course!) and are built to the same high quality and hand finished to high standard; stress relieved and re-tensioned to ensure a durable tough wheel. The black rims and spokes with deep red anodized hubs look the business too. We carry all the service parts as spares so you can be confident these wheels will keep rolling..,Front32 hole | Cross 3 | 990 grams.,20mm through axle hub, with international standard (6 bolt) disc brake mounts in a choice of red or black with matching spoke nipples..,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,9mm conversion kit available..,REAR - 9 Speed32 hole | Cross 3 | 1290 grams.,10/135mm axle hub with fixing bolts to secure your wheel into your frame (quick release could also be used (not included), with international standard (6 bolt) disc brake mounts and a 9 speed freehub in a choice of red or black with matching spoke nipples..,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,REAR - 1 to 6 Speed32 hole | Cross 3 | 1340 grams.,10/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples. .,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,NB: weight indicated on The rim is to illustrated the weight of the The rim only and does not describe the weight of the fully built 26 Inch DMR Pro wheels..,Single speed spacer kit and cassette shown in images sold separately..,
The DMR Zone wheels are our newest offering into the world of Alpine riding. Wide, light, tough and tubeless ready, Zone wheels are built with double butted spokes onto our lightweight DMR Zone hubs.The Zone wheel is aimed at the rider who wants a wheelset to last all season long and survive the dings and flat landings that riding hard brings.Key Features:26"/27.5" Zone wheel sizes available,New 27.5” 35mm super wide 6013 T6 Alloy rim offers exceptional durability.,Angled flanges relieve stress on spoke heads,Welded rim gives a stronger join than pinned alternatives,Wheels supplied with tubeless conversion tape,Built around our Superlight 6 Pawl DMR Zone Rear Hubs,Zone Rim available separately (32H).Specification:27.5” wheelset has a 35mm external rim width, 30mm Internal,26” wheelset has a 30mm external rim width, 24mm Internal,Double Butted spokes with black brass nipples.,Weight: 27.5” Front 970g | 27.5” Rear 1060g,Weight: 26” Front 854g | 26” Rear 930g,Adapters included. Front: 15/20mm. Rear: 135x12mm/142x12mm.
The DMR Zone Boost wheels are our newest offering into the world of Alpine riding. Available in both 27.5” and 29” versionsBuilt onto our newest 35mm tubeless ready Zone rim, with double butted spokes and our new lightweight DMR Zone Boost hubs. The Zone wheel is aimed at the rider who wants a wheelset to last all season long and survive the dings and flat landings that riding hard brings.Available with Shimano or SRAM XD freehubs.Key Features:27.5" / 29” Zone wheel sizes available.,New 35mm super wide 6013 T6 Alloy rim offers exceptional durability.,Welded rim gives a stronger join than pinned alternatives.,Boost spacing offers near a near dish-less build.,Truly tubeless ready, supplied with tape and valves ready fitted.,Built around our new Superlight DMR Zone Boost Hubs..Specifications:27.5" / 29” wheel sizes available.,35mm external rim width, 30mm Internal.,Front 15 x 110mm, Rear 12 x 148mm.,Centrelock disc mounting.,10/11sp Shimano or Sram XD options.,27.5” Front 970g | 27.5” Rear 1100g | 29” Front 1020g | 29” Rear 1150g.,Wheels supplied with tubeless conversion tape and valves fitted.,Double Butted spokes with black brass nipples..Spoke Lengths 275:Front Disc Side: 268mm,Front Non Disc Side: 271mm,Rear Drive Side: 268mm,Rear Non Drive Side: 270mm.Spoke Lengths 29:Front Disc Side: 284mm,Front Non Disc Side: 287mm,Rear Drive Side: 284mm,Rear Non Drive Side: 286mm.
The 48mm rim depth on this superb road wheel provides every ride with dependable crosswind stability and minimises drag on speedy, timed races. The carbon construction maintains excellent stiffness and responsiveness on the most challenging journeys, while the tubeless-ready profile reduces the weight of the wheel for a brilliantly streamlined experience. Carbon Fibre, Deep Rim Front Road Wheel This fast-paced and quality-made road wheel rolls with poise and balance and achieves a spin with minimal friction thanks to the SINC ceramic bearings in the DT240 hub. The hub delivers top-notch control and efficiency and comes laced with DT AeroLite spokes for enhanced riding strength. The addition of a 36-tooth Ratchet System freehub helps to generate impressive power transfer when you need extra thrust. CenterLock disc brake optimisation finishes off this well-designed road wheel by DT Swiss. Included: Tubeless tape 19mm IS 6-bolt adapter Road Swissstop black prince Tubeless valve and refill kit Valve guard Wheel bag
Equipped with a tall 80mm rim, this carbon-fibre road wheel takes you through every triathlon stage and time trial with composure and strength. Stiff and easy-to-handle at high speeds, this tubeless-ready rim gives a lightweight and drag-reducing experience on every outing. Deep-Rimmed, High-Performance Carbon-Fibre Road Wheel Designed alongside aero-wheel specialists SWISS SIDE, this Dicut model rolls with superb control and speed thanks to its DT240 hub and SINC ceramic bearings. Laced with DT Aero Comp spokes for added strength and stiffness, the hub keeps the wheel as responsive as can be. A Ratchet System 36 SL freehub provides excellent power transfer to make light work of climbing and sprinting. Equipped with a hard-wearing braking surface, this DT Swiss road wheel gives impressive stopping power and speed control as you battle with the clock.
With a mid-depth, aerodynamic, full carbon rim, reliable and strong hubs and a sturdy build, the DT Swiss ARC 1400 DICUT 62mm Disc Brake Wheelset is the perfect choice when versatility is needed for riding over moderate climbs and along fast valleys. The rims are realised in a refined grade of carbon fibre that infuses reactivity into any ride thanks to its low weight and high lateral rigidity. This carbon material is formed into a 62mm deep rim profile that has been honed in the wind tunnel via input from aerodynamic experts SWISS SIDE to be fast and stable through a full sweep of riding scenarios. The rims' aerodynamic prowess is complemented by their broad, 20mm internal widths that help to lower rolling resistance and improve ride comfort by better supporting the sidewalls of tubeless-ready or standard clincher tyres. DT Swiss 240 hubs spin smoothly, and their rigid alloy hub shells improve braking performance by donating a rock-solid platform for disc rotor mounting. An EXP ratchet freehub body is integrated neatly into the rear hub, and this has a super-quick engagement system to quicken response to pedalling input. The hubs are linked to the rims by the bladed Aero Comp spokes laced in sturdy two-cross patterns. Highlights Aerodynamic but stable, this wheelset is a versatile all-rounder for riding over mixed topography Lightweight and torsionally stiff full carbon rim 62mm deep AERO+ rim profile is aerodynamically tuned in cooperation with SWISS SIDE 27mm external rim width reduces air turbulence at the tyre-to-rim interface Broad 20mm internal rim width lowers rolling resistance and improves comfort Hooked internal rim format is compatible with tubeless-ready or standard clincher tyres DT Swiss 240 hubs are light and torsionally stiff for better braking EXP ratchet freehub offers near-instant engagement DT Swiss aero comp spokes lower drag and are reliable Features Tyre compatibility: Tubeless-ready clincher or standard clincher Wheel size: 700c Rim: Full carbon Rim profile: AERO+ Rim finish: Naked carbon with waterslide decals Rim depth: 62mm Internal rim width: 20mm Rim internal format: Hooked External rim width: 27mm Spokes: DT Aero Comp T-head Spoke count: Front - 24 / Rear - 24 Spoke lacing pattern: Front - two-cross / Rear - two-cross Hubs: Front - DT Swiss 240 disc brake / Rear - DT Swiss 240 disc brake with EXP 36 freehub Bearings: Stainless steel Freehub compatibility: Shimano HG/SRAM Road 11-speed (SRAM XDR Road freehub body included as a spare) Brake compatibility: Disc Center Lock Front axle: 12mm x 100mm thru-axle compatible Rear axle: 12mm x 142mm thru-axle compatible Recommended tyre size: 23mm and above Maximum tyre pressure: Depends on tyre type and width - please refer to the user guide Maximum recommended system weight: 110kg (including rider, bike and any luggage) Manufacturer claimed weight: Front - 817 grams / Rear - 936 grams / Wheelset - 1753 grams
As part of the DT Swiss Cross Road range the C 1800 Spline wheels have been designed to perform on any surface. The C 1800's rims are a massive 22 mm wide internally, perfect for big volume 32c gravel and cyclocross tyres, giving even the fattest treads the support they need to be run at lower pressures, improving traction and comfort on rough, loose surface.Wide 22mm ID aluminium tubeless ready rim supports wider gravel tyresIncredibly smooth and durable DT Swiss 370 hubsSuitable for 12mm thru-axlesLightweight starting from 811g (front)The C 1800 Spline wheels are equipped with 23mm high, 22mm wide ID, aluminium tubeless ready rims and DT Swiss spokes. The Aero Comp spokes are light, tough and are happy transferring the torque from even the beefiest of calves. DT's 370 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 370 3-pawl engagement system is the one of the most reliable out there.If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the C 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.
As part of the DT Swiss Cross Road range the C 1800 Spline wheels have been designed to perform on any surface. The C 1800's rims are a massive 22 mm wide internally, perfect for big volume 32c gravel and cyclocross tyres, giving even the fattest treads the support they need to be run at lower pressures, improving traction and comfort on rough, loose surface.Wide 22mm ID aluminium tubeless ready rim supports wider gravel tyresIncredibly smooth and durable DT Swiss 370 hubsSuitable for 12mm thru-axlesLightweight starting from 811g (front)The C 1800 Spline wheels are equipped with 23mm high, 22mm wide ID, aluminium tubeless ready rims and DT Swiss spokes. The Aero Comp spokes are light, tough and are happy transferring the torque from even the beefiest of calves. DT's 370 hub internals are combined with a freshly optimised SPLINE hub-shell designed to improve spoke bracing and improve stiffness, the 370 3-pawl engagement system is the one of the most reliable out there.If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the C 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers. The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.