The Brand-X Trail Wheelset HG Freehub is designed for use on the Brand-X Trail rear wheel. It comes complete with pawls, a spring and a bearing for straightforward installation. Genuine Brand-X spare part.
The Shimano Tourney 7-Speed TZ21/TZ31 freewheels ensure a smooth transition when shifting up or down the block. With the TZ31 you can conquer the hills using the super-low 34T gear. The TZ21/TZ31 freewheels are renowned for there reliability and smooth shifting. Suitable for mountain bikes and a wide range of other cycles.
The brand new Freewheel range from Madison Saddles offers comfort for all and excellent value. Unisex saddle offering exceptional support for leisure cyclists & commuters with a relaxed & upright riding posture With maximum foam padding for cushioned comfort Unique channelled saddle base balances strength with flexibility & shock absorption during riding Vacuum sealed cover for maximum water resistance lightness & durability Width 158mm Length 275mm
The brand new Freewheel range from Madison Saddles offers comfort for all and excellent value. Features: Unisex saddle offering exceptional support for leisure cyclists & commuters with a relaxed & upright riding posture With maximum foam padding for cushioned comfort Unique channelled saddle base balances strength with flexibility and shock absorption during riding Vacuum sealed cover for maximum water resistance lightness & durability Width 202mm Length 268mm
Available in multiple size options for MTB, gravel and road cycling disciplines, the Muc-Off Tubeless Valves are a perfect choice of upgrade for quick and easy inflation. With each valve stem and cap made from aircraft-grade 7075 machined aluminium, they provide excellent durability and strength on demanding terrains without adding any unnecessary excess grams to your ride. Muc-Off has also equipped them with an anodised finish for a distinctive look and an additional layer of wear resistance and protection against corrosion during wetter riding conditions. Valve Core Removal Tool included. Boasting a unique Muc-Off design that's stronger and lighter than before, these Muc-Off Tubeless Presta Valves are also easier to use thanks to their machined six slot channel in the base. These slots allow your tyre to be inflated easier and can be used with most tubeless tyre foam inserts, allowing your tubeless sealant fluid and air to flow freely. Supplied with three sets of different shaped rubber inserts to fit a variety of rim shapes and create the perfect value to rim seal. In The Box - 2x 7075 aluminium tubeless Presta valves - 2x Valve caps - 2x Locking nuts - 1x Valve core removal tool (doubles as a spare valve cap) - 3x Pairs of rubber bases for size choice Technologies: Tougher Than Ever: Made with 7075 aircraft-grade aluminium to be lighter and stronger to endure the harshest terrain. Tyre Insert Air Flow System: Featuring 6 slots machined into the base of the valve stem allowing them to be compatible with most tubeless tyre inserts and allow your tubeless sealant fluid and air to flow freely when running tubeless tyre inserts. Manufacturer's Part Numbers: 20420 Black 44mm 20430 Black 60mm 20421 Orange 44mm 20431 Orange 60mm 20422 Green 44mm 20432 Green 60mm 20423 Purple 44mm 20433 Purple 60mm 20424 Red 44mm 20434 Red 60mm 20425 Blue 44mm 20435 Blue 60mm 20426 Gold 44mm 20436 Gold 60mm 20427 Pink 44mm 20437 Pink 60mm 20428 Silver 44mm 20438 Silver 60mm 20429 Multi Iridescent 44mm 20439 Multi Iridescent 60mm
A set of waterproof roll top sacks for extra protection of your gear or safety organise your packing. Coming in a variety of sizes. Sold in a 3 pack (2L,4L,8L). Features Lightweight but strong TPU / PU coated 70D Ripstop Full welded construction. Easy-open buckle.
Motivating yourself to ride in the rain is hard enough but to do it without mudguards is even harder! Trying to get comfy on your saddle when your behind is soaking wet and covered in mud is almost impossible. The best way to prevent this is with a clip on fender and the Topeak Defender XC11 Rear Mudguard has all the features to keep you and your bike protected from the elements. Constructed from impact resistant plastic this fender is lightweight and attaches to your seat post in seconds thanks to the quick release mounting system. Unlike lots of rear fenders which stay in one position this one can be adjusted to an angle that suits you so you can guarantee you stay protected.
This genuine replacement kit allows you to convert the axle size of your Pro2 or Pro4 rear hub to fit, allowing you to take your reliable Pro hubs with you to your next bike.
Shelter Wheel Kit is made of 35 washers that fit snugly over the valve stem, gluing at its base, with an elegant and almost invisible silencing effect.It's also great to balance wheels, with an additional vibration-reducing action.Key Features:Eliminates valve noises, especially on high-profile rims,Shelter washers can be used to finely balance wheels,Visco-Elastic behaviour reduced vibrations.How to silence valves:Shelter Wheel Kit is made of 35 washers that fit snugly over the valve stem, gluing at its base. With minimum bulk and weight, they provide an elegant and almost invisible silencing effect, cancelling unwanted valve movements and vibrations. The re-sealable bag makes sure washers retain their properties if needed for successive applications.Once Shelter washers are applied on the rim, it’s possible to remove the valve an re-insert it without loosing the silencing effect. This is just one application of our Shelter Wheel Kit, but there’s more.Nobody would drive a fast car whose wheels haven’t been carefully balanced after mounting tyres on.Current high performance bicycle wheels, with fancy ceramic bearings, lightweight carbon rims, cannot deliver their full potential if not properly balanced.It’s an easy task that only requires a Shelter Wheel Kit, a wheel truing stand (or a bicycle turned upside down..), patience and some minutes per wheel.Much nicer and effective than electrical tape to silence valves on high-end wheelsMuch nicer (and effective) than electrical tape to silence valves on high-end wheelsHow to balance wheels:Mount the tyre (and eventually disk) on the wheel, so that the wheel is in its rideable form.IMPORTANT: if balancing a tubeless wheel, make sure there’s very little or no liquid sealant inside (that can be added later). Liquid sealant spreads while riding without creating wheel unbalance, but it will interfere with static balancing.Place the wheel on a truing stand and make sure it can rotate freely.With a gentle push, make the wheel spin. After a few complete rotations in the direction of the push, the wheel will enter a pendulum phase where it makes partial rotations, back and forth. Behaving like a pendulum, the excess of weight on the wheel is subject to a restoring force (due to gravity) that accelerates it toward the equilibrium position. Amplitude of swings will reduce until the wheel stops: the lowest point is where the excess weight is.Often wheels stop with the valve at the lowest point… but sometimes uneven weight distribution on the tyre or less-than-accurate carbon fiber lay up overcompensate that, and the lowest point is not corresponding to the valve.Keeping the lowest point of the rim/tyre as reference, identify the opposite point on the rim (you can find it using a ruler, aligned with the lowest point and the wheel axle) and adhere a Shelter washer there.Repeat the process from #1. Each time the heaviest point may move slightly (because of friction in the hub), but it will normally remain within a +-10 cm (4 inches) range.The wheel is balanced when, upon making it turn, IT WILL STOP WITHOUT ENTERING THE PENDULUM PHASE (it won’t change its rotation sense). With each subsequent spin, the lowest point when the wheel stops is a random point on the circumference, changing every time and depending on bearing friction.Washers can be adhered one on top of the other, or side by side, on top of the rim or on its side (depending on rim profile/size).A good trick, although not always possible, is finding a spoke that’s close to the lightest point of the wheel and cutting the washer on one side, so that the washer can be put around the spoke.Each Shelter washer weights around 1 g. Typical wheel unbalance ranges from 4 to 12 grams.Visco-elasticity reduces vibrations:That’s an added bonus when balancing a wheel with Shelter washers.The transmission of vibrational energy through any structure can be reduced by introducing visco-elastic materials at discrete points. It’s exactly what Shelter does, contributing to reduce vibrations on very stiff wheels.
Key Features:A reliable 7-speed screw-on freewheel,Engineered for smooth chain movement up or down the block,For 7-speed gear systems,Can be easily installed onto compatible screw-on type hub,Suitable for mountain bikes and a wide range of other cycles.
Key Features:Front wheel,26 x 1.75black alloy rim,36 hole alloy hub ,Nutted axle ,Black spokes.Please Note, front and rear wheel are sold separately, this image is for display purposes.
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal