Park Tool Professional Wheel Alignment Gauge WAG-4For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished”. To check this, and to make precision adjustments, a wheel alignment gauge (also called a “dishing tool”) is a must.An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.Features:The WAG-4 allows easy checking of the dish on road, mountain, or BMX wheels from 16” to 29” (ETRTO or ISO rim sizing of 305-630)Works with any hub widthCan be accurately used with the tire still on the wheelWeight: 1.7lbs. (0.77 kilograms) Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Wheel Alignment Gauge (WAG-5)To get the best performance from your wheels and bike, correctly dished wheels are vital. The Part Tool Portable wheel Dishing Tool makes the checking of wheel dish quick and accurate. You can easily ascertain how centrally the rim sits over the hub, avoiding the issues surrounding a poorly dished wheel, such as frame rub. Features:A sturdy yet portable wheel dishing toolFits wheels from 24 inches - 29 inches in diameter, including 700C road wheelsDisassembles quickly for storage or travelMade in the USALimited lifetime warrantyBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover (FR-1.3) The Freewheel Remover FR-1.3 is another well-crafted tool from Park Tool, designed for the efficient and easy removal and installation of the most common thread-on 12-spline 5-10-speed freewheels. Simple Freewheel Removal and Fitting Fitting perfectly on to your axle, the FR-1.3 makes light work of fastening or loosening your freewheel for quick and easy removal and replacement. Compatible with a wide range of freewheels, this Park Tool device features an enlarged thru-hole, capable of accepting wheels with axles up to 14mm diameters, including E-Bike wheels. The 1" hexagonal end of the FR-1.3 makes it easily compatible with most wrenches and bench vices for additional leverage and support. Features: Compatibility: Shimano, Sachs Aris, Sun Race, DNP Epoch and other 5-10-speed freewheels Size: 22.6 mm Diameter + 1" Hexagonal Head Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Home Mechanic Wheel Truing Stand TS-7MThe TS-7M is constructed from heavy gauge steel and allows for extremely accurate and reliable wheel truing at an economical price.Features: For wheels up to 180mm wide and 740mm in diameter Ideal for motorcycle wheelsBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Wrench FRW-1The FRW-1 is a one-inch socket and securely holds freewheel and lockring tools (FR-1 through FR-8 plus the BBT-5/FR-11) for removal and installation. Features an investment cast head with locking setscrew and a long, round, vinyl-dipped handle for superior leverage.Features: One inch socket Securely holds freewheel Investment cast head Lone, round, vinyl dipped handle Note: Always use a skewer or axle nut to hold a cassette/freewheel tool in place during removalBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Professional Wheel Truing Stand (TS-4.2)Park Tool's TS-4.2 is a pro-level, workshop-quality truing stand that ensures you can get your wheels spinning true with accuracy and hassle-free precision. This new innovative model is compatible with an even wider range of hubs, wheels and tyre sizes. It is built to provide more clearance than ever before and is optimised for faster and easier calibration while being more robust and durable.Compatible with Wheel Sizes from 16" to 29"Ingeniously designed to accurately self-centres virtually any diameter wheel size, this Truing Stand is compatible with wheel sizes from 16” to 29” and gives clearance for tyres widths all the way up to 5” without needing to remove disc brake rotors.Direct-Action Truing Caliper for Precise Wheel CentringIt features precise adjustment while keeping wheels centred thanks to its tall and movable uprights, plus, it also is equipped with direct-action truing calipers. These super-accurate calipers enables you to perfect the performance of the narrowest rims with outstanding accuracy. Also, it's equipped with everything required for the greatest-adjustability and wheel compatibility - including, a built-in Speed Knob to quickly change axle widths and thru-axle adaptor fittings, and it features removable and replaceable nylon caliper tips to protect painted and anodised rims.Features:Rim Diameter Compatibility: 16" - 29"Hub Width Compatibility (O.L.D.): 75mm to over 250mmTyre Width Compatibility: Up to 5"+Built-in thru-axle adaptorsRemovable, replaceable nylon caliper tips to protect painted/anodized rimsSpeed knob to quickly change axle widthsPlease note, this bike is for use on BMX tracks and skate parks. In many countries, it is illegal to use this bike on public roads without using the two independent braking systems provided (a front and rear brake).Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Professional Wheel Truing Stand TS-2.3The Professional Wheel Truing Stand TS-2.3 from Park Tool is a workshop-quality wheel truing stand that is ideal for building bike wheels. Ideal for wheel truing up to 29"+ in size, with or without a tyre fitted, this top-quality workstand is a superb addition to any workshop setup.Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench — still the top choice of professional mechanics everywhere for over 40 years, and for good reason.With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters.The TS-2.3 is constructed from durable powder coated heavy-gauge steel and is manufactured, assembled and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.Features: Wheel Capacity: Maximum wheel size: Up to 29"+ with or without tyre Maximum Hub Width: 200 mm (7.87") Maximum Rim Width: 102 mm (4") Hub Compatibility: Accommodates quick release and solid axle hubs - also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: Bolt to benchtop - mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center Clamp in vise - base is 76 mm (3") deep Install in TSB-2.2 Truing Stand BaseBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Two-sided spoke wrench is designed for Mavic wheel setsLong handle provides good leverage for stubborn spoke nipplesFits both Mavic 7-spline 6.4 mm outer diameter and 6-spline 9 mm outer diameter Mavic nipplesMade in the USA and covered by Park's legendary limited lifetime warranty
Never let accuracy be your nemesis with this simple yet highly effective toolCan be used with or without the tyre fitted to the wheel thanks to its innovative designEnsures the rim is centred between the locknuts of the wheel hubAny hub width can be accommodatedFits wheels from 16 to 29 inches
Designed especially for the home mechanic the TS-8 allows accurate wheel truing at an economical priceAccepts wheels sizes from 16 inches to 29 inches with or without the tyre mountedInnovative sliding dropout allows quick and secure wheel installation accommodating hub widths up to 170 mmDishing (centring) the wheel is performed by simply flipping the wheel in the stand with no need for a separate dishing toolConstructed from heavy gauge steel to resist flexingThe TS-8can be used freestanding or bolted to a bench for extra stability
The perfect tool to remove stubborn freewheelsLong tubular handle for maximum leverageHex shaped end accepts all Park freewheel remover toolsLocking knob holds freewheel tool securelySuper strong investment cast steel