The Nukeproof Neutron V2 Rear Wheel 36t has been completely redesigned from the ground up and gives riders incredibly fast and smooth-rolling performance on every ride.This rear wheel features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Spoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size:Wheelsize: 27.5", Spacing: 142mm / 148mm x 12mm, Non-Driveside: 274, Driveside: 272Wheelsize: 27.5", Spacing: 150mm / 157mm x 12mm, Non-Driveside: 274, Driveside: 273Wheelsize: 29", Spacing: 142mm / 148mm x 12mm, Non-Driveside: 292, Driveside: 290Wheelsize: 29", Spacing: 150mm / 157mm x 12mm, Non-Driveside: 292, Driveside: 291Conversion kits and replacement end caps available separately.Key Features: Rim Material: 6066 Alloy, Use: MTB, Trail, All Mountain, Enduro and DH, Spacing Options: 142x12mm, 148x12mm, 150/157x12mm, Conversion Options: 142x12mm can be converted to 135mm QR; 148x12mm can be converted to 141mm Boost with end caps (sold separately), Rear Hub Engagement: 36 points of engagement (every 10 degrees), Freehub Options: Shimano HG, Shimano Microspline or SRAM XD, Spokes: Spoke Type: J-Bend; Spoke Count: 32; Lacing Pattern: 3x; Disc Mount: 6-bolt, Width: Inner Rim Width: 29mm; External Rim Width: 33mm; Rim Height: 18mm, Tubeless Ready: Yes - Pretaped and valve supplied; Single or Pair: Single, Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tape.
The Nukeproof Neutron V2 Front Wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth-rolling performance on every ride.This front wheel features a Nukeproof Neutron front hub that is available for both 15mm or 20mm spacings in both Boost and non-Boost. Nukeproof also sell end caps for QR (available separately).The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproofs Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Front 27.5" Wheel: Non-Driveside: 272, Driveside: 273, Front 29" Wheel: Non-Driveside: 291, Driveside: 292,.Conversion kits and replacement end caps available separately. Key Features: Rim Material: 6066 Alloy,Use: MTB, Trail, All Mountain, Enduro and DH,Wheel Size: 27.5" or 29" options available,Spacing Options: 15x100mm, 15x110mm, 20x110mm Non Boost, 20x110mm Boost,Spokes: Spoke Type: J-Bend; Spoke Count: 32; Lacing Pattern: 3x,Disc Mount: 6-bolt,Width: Inner Rim Width: 29mm; External Rim Width: 33mm; Rim Height: 18mm,Tubeless Ready: Yes - Pretaped and valve supplied.
Completely redesigned from the ground up, the Nukeproof Horizon V2 Rear Wheel 102t delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series.This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better.Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in.A full range of spares are available to service your hub in the future.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:Rear 27.5" Wheel: Non-Drive Side: 271, Driveside: 268 Rear 29" Wheel: Non-Drive Side: 289, Driveside: 286 Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail / All Mountain / Enduro / DH,Rim Width: Inner: 30mm; External: 35mm; Rim Height: 21.6mm,Spacing Options: 142x12mm; 148x12mm; 150/157x12mm,Conversion options: 142x12mm can be converted to 135mm QR, 148x12mm can be converted to 141mm Boost with end caps (sold separately),Rear hub engagement: 102 points of engagement (every 3.52 degrees),Freehub options: Shimano HG, Shimano Microspline, SRAM XD,Spoke Type: J-Bend; Spoke count: 32; Lacing pattern: 3x,Disc Mount: 6-Bolt,Tubeless Ready: Yes - Pre-taped and valve supplied;,Build: Handbuilt .
Completely redesigned from the ground up, the Nukeproof Horizon V2 Front Wheel delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders.It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight.Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate.LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side.This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:27.5" Front Wheel: Non-Drive Side: 269, Driveside: 27029" Front Wheel: Non-Drive Side: 288, Driveside: 289 Conversion kits and replacement end caps available separately Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail, All Mountain, Enduro and DH,Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost,Rim Width: Inner Width: 30mm; External Width: 35mm,Rim Height: 21.6mm,Tubeless Ready: Yes - Pretaped and valve supplied,Spoke Count: 32; Spoke Type: J-Bend; Lacing Pattern: 3x,Disc Mount: 6-Bolt,Build: Handbuilt,Weight: 27.5" 15mm Boost: 884g; 27.5" 20mm Boost: 946g.
Completely redesigned from the ground up, the Nukeproof Horizon V2 Front Wheel delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders.It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight.Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate.LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side.This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:27.5" Front Wheel: Non-Drive Side: 269, Driveside: 27029" Front Wheel: Non-Drive Side: 288, Driveside: 289 Conversion kits and replacement end caps available separately Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail, All Mountain, Enduro and DH,Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost,Rim Width: Inner Width: 30mm; External Width: 35mm,Rim Height: 21.6mm,Tubeless Ready: Yes - Pretaped and valve supplied,Spoke Count: 32; Spoke Type: J-Bend; Lacing Pattern: 3x,Disc Mount: 6-Bolt,Build: Handbuilt,Weight: 27.5" 15mm Boost: 884g; 27.5" 20mm Boost: 946g.
Thanks to its disc brake compatibility, this MTB front hub is also ideal for FR/Enduro use as well as making it a great combo with every Orbital rear hub. Rolling smoothly on high quality sealed bearings and using aluminium 7075 cones, this model is more than capable of handling all the abuse that comes with weaving between the mountain bike trails at speed. Coming complete with an anodized finish and black hardware, it also offers additional protection against the elements as you take on the trails in all-weather conditions. Hubs are offered in two versions – 32h and 36h.
This MTB hub uses a 10t driver that fits big and strong bearings inside, so everything runs smoothly without any bearing problems. The steel axle is cut flush with the nuts for a clean look and for safety reasons. Steel nuts give extra strength and clamping force for securing your wheel in horizontal dropouts. The looks are just as good as the function with black hardware and an anodised finish. Disc brake compatible. Hubs are offered in two versions – 32h and 36h.
Machine built and hand trued, this wheelset features the reliable Orbital hubs, which have proven their quality in the dirt jumping game and guarantee you a problem-free ride. Stiff, strong, and offering incredible value, the Solar Trail wheels are the perfect choice for trail and all-mountain riding. - Proven double pin joint on rim - Disc brake only - Tubeless Ready (tubeless rim tape and valves are not included but are available separately) - "Boost" options have 15x110mm front and 12x148mm rear hub spacing
◌Octane One Solar Trail Mountain Bike WheelsetOctane One’s Solar Trail MTB Wheelset is a modern, tubeless ready wheelset that rolls on super wide and low rims, resulting in excellent grip and control over rough terrain. Machine built and hand trued, they feature the reliable Orbital hubs, which have proven their quality in the dirt jumping game and guarantee you a problem-free ride. Stiff, strong, and offering incredible value, the Solar Trail wheels are the perfect choice for trail and all-mountain riding.Features: Material: Rim: 6061 T6 Aluminium; Hub: 6061 Aluminium body, 7075 Aluminium hardware; Spokes: Stainless Steel; Nipples: Brass Rim Outer Width: 35mm Rim Inner Width: 29mm Rim Height: 19mm Valve Hole: Presta Proven double pin joint on rim Disc brake only Octane One rim tape included Hubs (Non-Boost Option): Front: Orbital 15x100mm; Rear: Orbital 12x142mm cassette (10/11spd MTB compatible freehub) Hubs (Boost Option): Front: Orbital 15x110mm; Rear: Orbital 12x148mm cassette (10/11spd MTB compatible freehub) Spoke Count: 32 Spokes: Plain gauge 2.0mm Spoke Nipples: Brass, 14mm Spoke Lacing Pattern: 3 cross Rim ETRTO: 27.5”: 584mm; 29”: 622mm Rim ERD: 27.5”: 562mm; 29”: 600mm Use: All-Mountain, Trail Tubeless Ready: Yes (tubeless rim tape and valves are not included but are available separately) Wheelset Weights: 27.5”: front (945g), rear (1070g); 29”: front (975g), rear (1100g)BuyOctane One Wheels & Tyresfrom Chain Reaction Cycles, the World's Largest Online Bike Store.
This pre-built wheel comprises the Odyssey Quartet Cassette hub with 9 driver, straight gauge black spokes and the Odyssey Quadrant rim. Available in RHD 9t only in all black ###section### Product Specs WHEEL SIZE:20" HUB:Odyssey Quartet Cassette AXLE:Female Bolts DRIVE SIDE:Right Side Drive RIM:Odyssey Quadrant SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1111g / 39.19oz
Quality freewheel from Odyssey. Fits only flip flop hubs with smaller thread size.
Pre-Built wheel from Odyssey. This front wheel comprises Odyssey's Quadrant rim laced into a high quality sealed bearing Odyssey front Quartet hub. Built with black straight gauge spokes and brass nipples ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Quartet Hub AXLE: Female RIM: Odyssey Quadrant Rim SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 938g / 33.08oz