Genuine Nukeproof replacement frame spare part.
Nukeproof Dolos WheelsetFeaturing a special blend of alloys, this dirt jump focused wheelset delivers a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you ride. Nukeproof has also equipped this model with a micro-shotpeened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to session the jumps in all weather conditions, without worrying about the elements damaging your gear.The front hub comes with 20mm end caps fitted and there are additional 15mm end caps in the box. The rear hub is a 135mm x 10mm bolt up, so it will be perfect for those heavy hits. This wheelset is only available in 26” and has a 25mm internal width to suit tyres from 1.6” to 2.5”.Features: Rim Material: Alloy Nukeproof Blend Use: Dirt Jump Spacing: Front: 20mm x 110mm; Rear: 10mm x 135mm bolt up (Front 15mm end caps supplied in the box as well) Conversion Options: Front 15mm & 20mm end caps also available separately but are included with wheels Driver Options: Comes with 11T Driver (12T and 13T available separately) Rim Width: Inner: 25mm; Outer: 30.8mm Rim Height: 22mm Tubeless Ready: Yes, pre-taped Spoke Type: J-Bend Spoke Count: 32 Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Points of Engagement: 24 Single or Pair: Pair Weight: Front: 1000g, Rear 1290g including tape, 11t driver & boltsManufacturer's Part Number: NUKDOLDJWS Black 26"Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Nukeproof Dolos wheelset has been designed as a strong and reliable wheelset for dirt jumping. The front hub comes with 20mm end caps fitted and there are additional 15mm end caps in the box. The rear hub is a 135mm x 10mm bolt up so will be perfect for those heavy hits. The rim is constructed from a special blend of alloys, which give it a similar hardness to 7-series alloy but with the ductility and yield properties of a 6-series. This means that you'll benefit from the best of both worlds as you ride. Nukeproof has also equipped this model with a micro-shot peened and anodised finish, which gives it an extra layer of resistance against corrosion and wear. As a result, you'll enjoy being able to session the jumps in all weather conditions, without worrying about the elements damaging your gear. This wheelset is only available in 26” and has a 25mm internal width suiting tyres from 1.6” to 2.5”. • Conversion Options: Front 15mm & 20mm end caps are also available separately but are included with wheels. • Driver Options: Comes with 11t Driver, 12t and 13t available separately. Manufacturer's Part Number: NUKDOLDJWS Black 26"
Part of the ABEC-5 line, these bearings are the revised LLU/LLB dual seal bearings. They place an LLU full contact seal on their outside facing surface, while the Inboard facing LLB medium contact seal allows for less drag. Their specific seal also increases their lifespan and offers exceptional performance. High precision balls are within 5/1,000,000″ round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade. The Nukeproof Enduro 61805 ABEC5 V2 Hub Bearing Pair is only suitable for converting the front hub of the Nukeproof Horizon V2 and Neutron V2 from 15mm to 20mm axles. This bearing will also fit many other hubs that use this size of bearing. This superb bearing sets the benchmark for high precision bearings.
Genuine Nukeproof replacement parts.
This lightweight alloy freehub body features a 30-Tooth ratchet that provides exceptional drivetrain strength and increased engagement, which supplies a superfast power-transfer and acceleration from rider to trail. High-Quality Nukeproof have fitted this freehub with two high-quality, sealed cartridge bearings inside the freehub and a low friction seal that sits between the freehub body and the hub bearings, this effectively eliminates bearing contamination from dirt, mud and water.
Nukeproof end caps are available for the Generator 3 in 1 hub so you have the option to choose the axle system that fits your bike. This allows easy conversion between all major axle sizes: - QR, 135mm x 12mm or 142 x 12mm.
This non-driveside seal fits all Nukeproof Horizon and Neutron v2 rear hubs. Hub Seal Changing this seal is easy by following the instructions below: 1. Remove non-driveside end cap 2. Take a thin flat head screwdriver and gently prize off the old seal 3. Push new seal in place 4. Refit non-driveside end cap
This Nukeproof Bearing Kit is a genuine, high-quality replacement bearing kit, featuring high quality EZO Japanese cartridge bearings for Nukeproof Horizon front hubs.
These end caps can be used to convert your hub to a different spacing or replace a lost cap. This makes them perfect as a replacement or for riders who want to transform their hub set-up. Compatibility Chart & How to Fit End Caps Click here to determine which hubs can be converted, as the caps only fit the original specific hub options. End Caps: Changing end caps is simple and no tools are required. Just pull off the end caps on the hub and then push the new ones on. Where the end caps are not identical, the non-driveside always has the wider flange to cover the bearing. All caps sold as pairs and only compatible with Nukeproof Horizon V2 hubs
This freehub body features a tough alloy construction, which makes it perfect for replacing your old or worn-out existing model. Suitable for use only on Nukeproof Horizon V2 hubs, this freehub body is designed for quick and easy installation. Options: · Shimano HG · Shimano Microspline · SRAM XD A new hub seal and bushing is supplied with Nukeproof freehubs. Please Note: The new hub seal will be fitted to the freehub for transport purposes. This needs to be removed from the freehub by pressing the pawls BEFORE fitting the freehub. Microspline freehubs also include the driveside end cap so you can easily convert an HG / XD hub to microspline If you are converting a microspline hub to XD or HG, you will also require a new driveside end cap which can be bought here ( ) This freehub is only compatible with Nukeproof Horizon V2 hubs. For step-by-step fitting instructions click here. Freehubs: Installation Instructions: 1. Remove driveside end cap 2. Pull off old freehub turning anticlockwise as you pull 3. Check hub seal for damage, if it is damaged remove the seal 4. If seal was removed, press on new seal 5. Apply grease hub ratchet ring 6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise 7. Refit driveside end cap
Completely redesigned from the ground up, the Nukeproof Horizon V2 Front Wheel delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders.It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight.Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate.LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side.This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:27.5" Front Wheel: Non-Drive Side: 269, Driveside: 27029" Front Wheel: Non-Drive Side: 288, Driveside: 289 Conversion kits and replacement end caps available separately Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail, All Mountain, Enduro and DH,Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost,Rim Width: Inner Width: 30mm; External Width: 35mm,Rim Height: 21.6mm,Tubeless Ready: Yes - Pretaped and valve supplied,Spoke Count: 32; Spoke Type: J-Bend; Lacing Pattern: 3x,Disc Mount: 6-Bolt,Build: Handbuilt,Weight: 27.5" 15mm Boost: 884g; 27.5" 20mm Boost: 946g.