The Motion freecoaster features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the hub requires less maintenance and is a lot easier to disassemble than most. The nylon retention spring also reduces the internal drag and also enables faster rolling and smoother crankflips. The Motion is laced to a Federal Stance rim. the rim has a wide 40mm cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% from previous models to reduce the possibility of spokes pulling through the rim. Federal have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance.The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres. ###section### Product Specs WHEEL SIZE:20" HUB:Federal Motion Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Left Side Drive RIM:Federal Stance SPOKES:Butted NIPPLES:Brass WEIGHT:1377g / 48.6oz
DMR Pro Wheels :All our wheels are designed to be tough and good value, they are available individually allowing a mix and match approach. The range gives a choice of wheels for dirt jump, street riding, downhill or free-ride use..,Build Quality And Spare PartsAll the wheels include DMR rim tape (in red and black of course!) and are built to the same high quality and hand finished to high standard; stress relieved and re-tensioned to ensure a durable tough wheel. The black rims and spokes with deep red anodized hubs look the business too. We carry all the service parts as spares so you can be confident these wheels will keep rolling..,Front32 hole | Cross 3 | 990 grams.,20mm through axle hub, with international standard (6 bolt) disc brake mounts in a choice of red or black with matching spoke nipples..,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,9mm conversion kit available..,REAR - 9 Speed32 hole | Cross 3 | 1290 grams.,10/135mm axle hub with fixing bolts to secure your wheel into your frame (quick release could also be used (not included), with international standard (6 bolt) disc brake mounts and a 9 speed freehub in a choice of red or black with matching spoke nipples..,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,REAR - 1 to 6 Speed32 hole | Cross 3 | 1340 grams.,10/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples. .,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,NB: weight indicated on The rim is to illustrated the weight of the The rim only and does not describe the weight of the fully built 26 Inch DMR Pro wheels..,Single speed spacer kit and cassette shown in images sold separately..,
Tarmac, gravel, tow paths, tarmac again, cobbles, the Endurance Road wheel range is our most versatile wheel range, ideal for drop-bar bikes that see a wide variety of surfaces but still need to haul ass on the Sunday morning club run,The E 1800's sport a 20 mm internal width rim, optimised for 25- 35 mm tyres, making them able to cover a huge variety of roles as required,Need something Racier? check out our Performance and Aero Road lines, building a mixed surface or dedicated off road machine? have a look at the Cyclocross friendly Cross Road or super wide Gravel series,Simple and reliable 3-pawl rear freehub system with tool-free servicing,The combination of Aero Comp and super strong New Aero spokes are happy transferring the torque from even the beefiest of calves,For those looking to use the latest tyre tech the E 1800's come tubeless ready but can also be used with standard clinchers,The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.,Adapters are available for QR front and rear (not included) and front 15 x 100 (not included),Maximum recommended system weight: 120 KG,When bought as a pair they will include 6-bolt rotor adaptors, tubeless rim tape and valves,Weight: Front 759 grams Rear: 896 grams,.
Boasting a strong aluminium rim, this speedy and responsive front road wheel deals brilliantly with the pressures of speedy road riding. The 18mm internal rim width delivers brilliant agility and balance while the tubeless-ready profile helps to maintain a low weight for as streamlined a roll as a can be. Aluminium, Speedy, Strong and Lightweight Road Wheel The strength of this fast-rolling road wheel is reinforced by the DT Aero Comp wide spokes, which come laced through a durable and supportive DT370 hub. Pulled to optimal tension, the spokes work to maintain an aerodynamic performance. The hub gives your front-end superb support and ensures a smooth spin for brilliant comfort and control on every journey. Rounded out with a reliable braking surface to give top-notch speed control, this DT Swiss front road wheel is a superb option for today's road rider.
CeramicSpeed Rear Derailleur Pulley WheelsUpgrade your rear derailleur with CeramicSpeed Pulley Wheels for reduced friction and extended lifetime. The pulley wheels are the fastest spinning bearings on your bike, making an upgrade to CeramicSpeed an effective way to save you precious energy. CeramicSpeed aluminium alloy pulley wheels are specially designed to reduce friction to an absolute minimum, virtually eliminating the drag associated with standard pulley wheels. The special design helps guide the chain in its ideal line and perform super smooth shifting.Features: Ceramic bearings Longevity, 3-5 times longer than steel bearingsMaintenanceIt's important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil to the outside of the bearing seal, so that oil can penetrate the bearing. Do this when you lubricate your chain, or if you have washed your bike or have been riding in wet or muddy conditions. Buy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
CeramicSpeed Rear Derailleur Pulley WheelsUpgrade your rear derailleur with CeramicSpeed Pulley Wheels for reduced friction and extended lifetime. The pulley wheels are the fastest spinning bearings on your bike, making an upgrade to CeramicSpeed an effective way to save you precious energy. CeramicSpeed aluminium alloy pulley wheels are specially designed to reduce friction to an absolute minimum, virtually eliminating the drag associated with standard pulley wheels. The special design helps guide the chain in its ideal line and perform super smooth shifting.Features: Ceramic bearings Longevity, 3-5 times longer than steel bearingsMaintenanceIt's important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil to the outside of the bearing seal, so that oil can penetrate the bearing. Do this when you lubricate your chain, or if you have washed your bike or have been riding in wet or muddy conditions. Buy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
CeramicSpeed Rear Derailleur Pulley WheelsUpgrade your rear derailleur with CeramicSpeed Pulley Wheels for reduced friction and extended lifetime. The pulley wheels are the fastest spinning bearings on your bike, making an upgrade to CeramicSpeed an effective way to save you precious energy. CeramicSpeed aluminium alloy pulley wheels are specially designed to reduce friction to an absolute minimum, virtually eliminating the drag associated with standard pulley wheels. The special design helps guide the chain in its ideal line and perform super smooth shifting.Features: Ceramic bearings Longevity, 3-5 times longer than steel bearingsMaintenanceIt's important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil to the outside of the bearing seal, so that oil can penetrate the bearing. Do this when you lubricate your chain, or if you have washed your bike or have been riding in wet or muddy conditions. Buy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
CeramicSpeed Rear Derailleur Pulley WheelsUpgrade your rear derailleur with CeramicSpeed Pulley Wheels for reduced friction and extended lifetime. The pulley wheels are the fastest spinning bearings on your bike, making an upgrade to CeramicSpeed an effective way to save you precious energy. CeramicSpeed aluminium alloy pulley wheels are specially designed to reduce friction to an absolute minimum, virtually eliminating the drag associated with standard pulley wheels. The special design helps guide the chain in its ideal line and perform super smooth shifting.Features: Ceramic bearings Longevity, 3-5 times longer than steel bearingsMaintenanceIt's important that you properly lubricate your bearings in order to ensure optimal performance and maximum longevity. Add oil to the outside of the bearing seal, so that oil can penetrate the bearing. Do this when you lubricate your chain, or if you have washed your bike or have been riding in wet or muddy conditions. Buy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
A quality, sub-1600 gram road wheelset with bang up to date features such as wider rims and tubeless compatibility at a great price.,The Performance Road range is DT's classic road wheel range with a focus on low weights and responsive handling, ideal for those looking to sharpen up their ride's climbing and acceleration.,The sleeve-joined 18 mm internal diameter (23 mm external) rims are a step above the pinned versions usually found at this level and makes this ideal for the 23-28c tyres used on modern road bikes. If you want to go wider please check out our Endurance Road Range which is optimized for higher volume rubber.,SPLINE hub system offers greatly improved stiffness to weight ratios compared to traditional j-bend wheels and DT's straight pull spokes are widely available should you need replacements.,The hubs spin on quality cartridge bearings and a Simple 3-Pawl freehub system is easy to maintain and service without the need for specialist tools.,A blend of lighter Aero Comp and super strong New Aero spokes for a great mix of durability, comfort and power transfer.,For those looking to use the latest tyre tech the P 1800's come tubeless ready but can also be used with standard clinchers.,Maximum recommended system weight: 120 KG,When bought as a pair they will include DT RWS eco Skewers, tubeless rim tape, and valves.,. Weight: Front 694 grams Rear: 902 grams,Front Axle Type: 100mm QR,Brake Type: Rim,Colour: Black,Discipline: Road & Multisport,Hub Type: Quick Release,Product Type: Front & Rear Wheels,Rim Type: Clincher,Wheel Diameter: 700.
A quality 1675 gram disc road wheelset with bang up to date features such as wider rims and tubeless compatibility at a great price,The Performance Road range is DT's 'classic' road wheel with a focus on low weights and responsive handling, ideal for those looking to sharpen up their ride's climbing and acceleration,The sleeve-joined 18 mm internal diameter (23 mm external) rims are a step above the pinned versions usually found at this level and make these ideal for the 23-28c tyres used on modern road bikes, if you want to go wider please check out our Endurance Road Range which are optimised for higher volume rubber,A blend of lighter Aero Comp and super strong New Aero spokes for a great mix of durability, comfort and stability under braking,For those looking to use the latest tyre tech the P 1800's come tubeless ready but can also be used with standard clinchers,The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.,Adapters are available for QR front and rear (not included) and front 15 x 100 (not included),Maximum recommended system weight: 120 KG,Weight: Front 769 grams Rear: 906 grams,.
Key Features:A UCI-legal tubeless CX race wheel that also makes a damn fine rough-road commuting and bikepacking option, the C 1800s are some of the most versatile wheels in the DT range,The C 1800's rims are a CX friendly 22 mm wide internally, perfect for 33c Cyclocross race tyres but also for fat 28-35c slicks designed for mixed surface adventures,Want something a little less specific? Try our Endurance Road line which bridges the gap between Cross Road and classic road racing wheels,Want to go as wide as possible? Check out the dedicated off road Gravel series,The combination of Aero Comp and super strong New Aero spokes are happy transferring the torque from even the beefiest of calves,If you're interested in these then you'll almost certainly be wanting to run tubeless tyres, so you'll be glad to hear that the C 1800's come tubeless ready with tape and valves included, they can however also be used with standard clinchers,The front wheel comes ready for 12 x 100 mm thru axles, the rear comes ready for 12 x 142 mm thru axles.,Adapters are available for QR front and rear (not included) and front 15 x 100 (not included),Maximum recommended system weight: 130 KG,When bought as a pair they will include 6-bolt rotor adaptors, tubeless rim tape and valves,Weight: Front 791 grams Rear: 937 grams,.Specification:Brake Type: Disc,Colour: Black,Discipline: Gravel & Cyclocross,Rim Depth: 25mm,Rim Type: Alloy Clincher,Rim Width: 20 - 25mm,Wheel Diameter: 700c,.
DT Swiss P 1800 SP Rear Road Disc Wheel (32mm)A top-end training wheel and race-ready roller, this P1800 model by DT Swiss is an excellent all-rounder for the speedy and strong cyclist. Built with balance and stiffness at its essence, the 32mm-tall aluminium rim gives a true and trusted roll as you attack the asphalt, combining superb crosswind stability with a nimble and nippy surface contact area. The tubeless-ready profile also adds another level of composure and control when running lower tyre pressures. Versatile and Durable All-Round Rear Road Wheel This excellent aluminium road wheel further benefits from the DT370 hub at its core. Laced with DT Aero Comp Wide spokes, the straightpull hub ensures the wheel stays at optimum tension for dealing with the pressures of pacy road running, while housing a 3-Pawl freehub for added power and pace when you need it most. CenterLock disc brake optimisation allows you to attack every ride with confidence due to its supreme all-weather stopping prowess. Strong, sturdy and all set for silverware, the DT Swiss P 1800 SP DB 32mm Rear Wheel is a top-end choice for the modern road rider. Features: Rim Material: Aluminium Rim Type: Clincher Internal Rim Width: 18mm External Rim Width: 21mm Rim Height: 32mm Spokes: DT Aero Comp Wide straightpull with DT ProLock Squorx ProHead aluminium nipples, 2-cross lacing Hub Type: DT370 Hub Axle Type 142x12mm thru-axle Freehub: 3-Pawl, Shimano 11-speeds Tubeless-Ready: Yes Brake Standard: CenterLock disc brake Recommended Maximum Weight: 130kg Includes: Tubeless tape 21mm, Tubeless valve MTB/Road 40mm, IS 6-Bolt adapter Road, 5mm endcap kitBuy DT Swiss Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.