Eclat freecoaster rear wheel featuring their proven Cortex freecoaster hub and their lightweight E440 rim. ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Cortex freecoaster AXLE: 14mm male DRIVE SIDE: Left Side Drive RIM: Eclat E440 SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
Pre-built BMX wheel from Federal using their Stance Female cassette hub laced into a Stance XL rim with Butted Stance spokes. Comes with 2 x Nylon guards ###section### Product Specs WHEEL SIZE:20" HUB:Federal Stance Cassette AXLE:17mm Female Bolts DRIVE SIDE:Left Side Drive RIM:Federal Stance XL SPOKES:Butted NIPPLES:Brass WEIGHT:1460g
The Shadow Optimized freecoaster is much more than the next step in Shadow hub design. The performance, value, and strength of the Optimized freecoaster is the materialization of modern day BMX riding through the eyes of Shadow. The Non-Drive side of the Optimized freecoaster was designed completely around grinding. Included is a completely integrated non-drive side plastic hub guard that easily slides over the existing cone to simpifly your installation experience. Shadow designed a smaller hub flange to stay out of the way which allowed them to create a smaller hub guard that doesn’t need to be gigantic to get the job done. On the inside, they moved to a more reliable bushing resistance system that dissolves all previous engagement issues. Creating a more enjoyable freecoaster experience for you. The Freecoaster is lace to the Shadow Truss rim, The design of the Shadow Truss rim is focused around the same principles as modern bridge design in architecture. Considering the effects of compression as well as tension, the Shadow Truss rim is designed as a very rigid structure and one that transfers the load from a single point to a considerably wider area. These details create a stronger and more impact resistant rim to keep you rolling. ###section### Product Specs WHEEL SIZE:20" HUB:Shadow Optimized Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Left Side Drive RIM:Shadow Truss SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1433g / 50.65oz E3
A revolutionary freecoaster system utilizing Wethepeople's Magnetic Pawl Retention system, with a large slack setting like the Helix freecoaster, but 33% lighter and fully convertible into a regular cassette hub. Tested, developed, and trusted by Wethepeople team riders Felix Prangenberg and Tom Weikert. Features a 6061-T6 alloy refined hub-shell, hardened heat-treated crmo axle with 14mm hollow bore, 4 high quality sealed bearings and 2 nylon hubguards. The Logic rim uses a wider 35mm profile with a much thicker sidewall, which makes the rim incredible strong and resilient to sideway impacts that can happen from anything between under rotating a flair, or over rotating a hard 360 out of a rail. ###section### Product Specs WHEEL SIZE:20" HUB:WTP Hybrid AXLE:14mm DRIVE SIDE:Left Side Drive RIM:WTP Logic SPOKES:TBC NIPPLES:TBC WEIGHT:TBC
Utilising Wethepeople’s patented Hybrid System technology, the Shift Freecoaster Hub is up to 33% lighter than any other freecoaster and combines the smoothness and durability of a cassette hub with the endless possibilities of a freecoaster. Paired up with their own Viper and Gong Nylon hub guards and an adjustable slack system, the Shift can also easily be converted into a cassette hub in a matter of seconds. The Shift is laced to the E440. Lightweight at just 440g with a strong double walled design, The Eclat E440 has the edge over the competition. The tall profile provides rigidity while the straight side walls provide added assistance if you're running brakes. ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Shift AXLE: 14mm DRIVE SIDE: Left Side Drive RIM: Eclat E440 SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
Utilising Wethepeople’s patented Hybrid System technology, the Shift Freecoaster Hub is up to 33% lighter than any other freecoaster and combines the smoothness and durability of a cassette hub with the endless possibilities of a freecoaster. Paired up with their own Viper and Gong Nylon hub guards and an adjustable slack system, the Shift can also easily be converted into a cassette hub in a matter of seconds. The Shift is laced to the E440. Lightweight at just 440g with a strong double walled design, The Eclat E440 has the edge over the competition. The tall profile provides rigidity while the straight side walls provide added assistance if you're running brakes. ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Shift AXLE: 14mm DRIVE SIDE: Right Side Drive RIM: Eclat E440 SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
Designed with features and technologies that are typically reserved for premium race wheels Aksium delivers quality performance for everyday road riding.Features include straight-pull spokes for added strength and stiffness and lightweight rims for a lively ride quality. The rims are now wider which allows for increased air volume and a better fit for larger diameter tires (up to 32mm).The hubs are incredibly tough delivering high mileage and long-lasting dependability. And the QRM bearings are the smoothest in the category. It all adds up to a wheelset that delivers the high-quality ride that Mavic is known for. Key benefits Smooth efficient ride quality for everyday road riding. 17mm rim accommodates larger tire section for improved comfort. Straight-pull spokes are stronger than J-bend options. Engineered durability so you can ride more miles without service. High quality cartridge bearings. Pinned joint and reinforced drilling rim design. Consistent and stable spoke lacing. Rims Brake track: UB Control Tire: clincher Material: S6000 Aluminum Joint: pinned Valve hole diameter: 65 mm Internal width: 17 mm Height: 21 mm Drilling: traditional ETRTO size: 622x17C Hubs Freewheel: FTS-L steel Sealed cartridge bearings (QRM) Axle material: steel Front and rear bodies: aluminum QRM bearing preload technology FTS-L freewheel technology Spokes Shape: straight pull round Count: 20 front and rear Lacing: radial front and rear non-drive side crossed 2 rear drive side Material: steel Nipples: steel ABS Shape: straght pull round (front and rear non drive side) and straight pull flat (rear drive side) Delivered with BR101 quick releases User guide Rim tape Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 1 : road only For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 75bar/108PSI with a 23mm tyre - 46bar/67PSI with a 52mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo with optional driver body Front axle: Quick Release only Rear axle: Quick Release only Versions Color: Black only Compatible Adapters and freewheel bodies FTS-L Shimano / Sram freewheel body (30871101 - Delivered on the wheel) FTS-L Campagnolo freewheel body (30871201) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Aggressive with a downright surly attitude, the new Aeffect R wheelset was built to provide you category leading Trail to Enduro good times with a 30mm wide, offset 6069 alloy rim and new Trace hub to make for an unstoppable combo of toughness and durability.Rough And Rowdy - Made to handle all kinds of Enduro and all-mountain punishment, the burly, Aeffect R rim sports a 30mm inner width and is born tubeless ready.Balance is Key - Aeffect R sports a stout, 6069 alloy rim with a 4.5mm offset spoke bed to provide spoke tension balance, increasing wheel stiffness and overall fatigue life.No Frills, All Thrills - The new Trace hub doesn't need flash or gimmicks. Highlights include durable cartridge bearings, no-nonsense 10-degree engagement, a tough steel axle, and all relevant cassette body options. This hub will get the job done, ride after ride.SPECIFICATIONColour - Black.,Includes - 5 extra Spokes included with Rear Wheels.,Material - 6069 Aluminum.,Nipples - Black Brass Nipples.,Ext Rim Width (mm) - 34.,Int Rim Width (MM) - 30.,Spoke Butting - 2.0 / 1.7 / 2.0.,Spoke Count - 28.,Spoke Head Type - J-Bend.,Spoke Lacing - 3X.,Spoke Offset (MM) - 4.5.,Tubeless - Tubeless Ready.,Weight - 1920g (27.5"), 2000g (29").,Weight Conditions - Wheelset..
When you’re entering the pinball section on the Fort William World Cup downhill track or you’re flying blind on the most demanding enduro terrain at an Enduro World Series race there’s no time to be thinking about your wheels. Deemax is designed to absorb big hits and perform flawlessly on the roughest terrain giving pros and weekend warriors alike the confidence to push their limits.Developed with input from our top pro athletes this is one of the most durable wheelsets ever produced for hardcore gravity riders. It has been put to the test over and over again and recently delivered DH pros Laurie Greenland and Marine Cabirou to their first World Cup wins on the deadly Black Snake Track in Val di Sole Italy. The alloy rims feature a 28mm internal width with a triangular shape that helps absorb big impacts—from hard-hammering rocks to hard landings and big compressions. Our Black Shied treatment gives them a distinctive finish and protects the rims against impacts and scratches. We chose a classical J-bend spoke construction using 28 steel spokes (same spoke length throughout) double-butted and bladed for the perfect balance of vertical compliance and strength to handle the abuses of aggressive gravity riding.The hubs benefit from our strongest bearings and the rear features the ultra-reliable ID360 double ratchet system for fast engagement to help you accelerate out of the corners. It’s set up for either Boost or DH hub spacing and has 6-bolt disc mounts. It’s available for Shimano HG9 XD and Micro Spline freewheel bodies in 27.5” and 29”. The wheels include UST tubeless valves spare spokes and accessories. Key benefits Hammer through rough terrain with confidence Wider 28mm (internal) rim is engineered to absorb heavy impacts. Developed for our pro riders to conquer the harshest DH and Enduro racetracks. Proven by pros Developed tested and proven to meet the standards of World Cup DH racers and ready for hardcore bike park shredders or big mountain enduro riders. Easy to maintain Fast and easy to repair thanks to J-bend spokes. Two replacement spokes delivered with every wheelset. Rims Material: Maxtal Material: S6000 Aluminum SUP welding technology Drilling: traditional UST Tubeless Ready Internal width: 28 mm ETRTO size 275: 584x28TC ETRTO size 29: 622x28TC Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 28 front and rear Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Pre-installed tubeless rim tape 2 replacement spokes with each wheel 20X110mm boost adapters delivered with front Boost wheel 20X110mm NON-boost adapters delivered with NON boost front wheel 12X150 adapters delivered with 12X157 rear wheel Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology DH spacing axles: 12X150 12x157 Hub available for 6-bolt brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Recommended tire sizes: 60mm to 76mm (235 to 30) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 32bar/46PSI with a 47mm tyre - 285bar/41PSI with a 64mm tyre Versions Disc standard : 6 Bolts only Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Diameter: 275'' and 29'' Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Boost Axles : 15X110 ; 12X148 DH spacing axles: 12X150 12x157 12X157-7speed Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) ID360 Sram XD freewheel body (V3740101) Boost : 20x110 boost front hub cap (V2680401 - Delivered with the wheel) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel ID360 Shimano Micro Spline alloy freewheel body (V3990101) Boost : Torque Caps for 6 bolts hub (V2650401) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
When you’re entering the pinball section on the Fort William World Cup downhill track or you’re flying blind on the most demanding enduro terrain at an Enduro World Series race there’s no time to be thinking about your wheels. Deemax is designed to absorb big hits and perform flawlessly on the roughest terrain giving pros and weekend warriors alike the confidence to push their limits.Developed with input from our top pro athletes this is one of the most durable wheelsets ever produced for hardcore gravity riders. It has been put to the test over and over again and recently delivered DH pros Laurie Greenland and Marine Cabirou to their first World Cup wins on the deadly Black Snake Track in Val di Sole Italy. The alloy rims feature a 28mm internal width with a triangular shape that helps absorb huge any impacts from rocks to hard landings and big compressions. Our Black Shied treatment gives them a distinctive finish and protects the rims against impacts and scratches. We chose a classical J-bend spoke construction using 28 steel spokes (same spoke length throughout) double-butted and bladed for the perfect balance of vertical compliance and strength to handle the abuses of aggressive gravity riding.The hubs benefit from our strongest bearings and the rear hub features the ultra-reliable ID360 double ratchet system for fast engagement to help you accelerate out of the corners. It’s set up for either Boost or DH hub spacing frames and has 6-bolt disc mounts. It’s available for Shimano HG9 XD and Micro Spline freewheel bodies in 27.5” and 29”. The wheels include UST tubeless valves spare spokes and accessories. Key benefits Hammer through rough terrain with confidence Wider 28mm (internal) rim is engineered to absorb heavy impacts. Developed for our pro riders to conquer the harshest DH and enduro racetracks. Proven by pros Developed tested and proven to meet the standards of World Cup DH racers and ready for hardcore bike park shredders or big mountain enduro riders. Easy to maintain Fast and easy to repair thanks to J-bend spokes. Two replacement spokes delivered with every wheelset. Rims Material: Maxtal Material: S6000 Aluminum SUP welding technology Drilling: traditional UST Tubeless Ready Internal width: 28 mm ETRTO size 275: 584x28TC ETRTO size 29: 622x28TC Black Shield treatment (protects your rim against impacts and scratches) Asymmetrical rim design Spokes Lacing: front and rear crossed 3 Material: steel Nipples: steel ABS Count: 28 front and rear Delivered with UST valve and accessories Multifonction adjustment wrench (delivered with rear wheel) Pre-installed tubeless rim tape 2 replacement spokes with each wheel 20X110mm boost adapters delivered with front Boost wheel 20X110mm NON-boost adapters delivered with NON boost front wheel 12X150 adapters delivered with 12X157 rear wheel Hubs Instant Drive 360 freewheel technology QRM Auto bearing preload technology DH spacing axles: 12X150 12x157 Hub available for 6-bolt brake rotors Axles: Front 15X110 Boost ; Rear 12X148 Boost Intended use ASTM CATEGORY 5 : GRAVITY RIDING FOCUSED ON THE DESCENT Recommended tire sizes: 60mm to 76mm (235 to 30) For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg bike included Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 32bar/46PSI with a 47mm tyre - 285bar/41PSI with a 64mm tyre Versions Disc standard : 6 Bolts only Freewheel: SRAM XD Shimano HG9 Shimano Micro-Spline Diameter: 275'' and 29'' Compatibility Front axle: 15x110 Boost convertible to 20x110 Boost thru axle with adapters (6-bolts hub only) Freewheel: Shimano HG9 XD or Micro Spline Rear axle: 12x148 Boost thru axle Front axle: 15x110 Boost thru axle Boost Axles : 15X110 ; 12X148 DH spacing axles: 12X150 12x157 12X157-7speed Compatible Adapters and freewheel bodies ID360 Shimano HG9 alloy freewheel body (V3780101) Boost : 20x110 boost front hub cap (V2680401 - Delivered with the wheel) Boost 20 to 15mm front adapter for 6-bolts hub only (12982801) - Delivered with the wheel Boost : Torque Caps for 6 bolts hub (V2650401) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Built on 30mm deep aluminum rims that are welded for superior strength this track-racing wheelset delivers an aerodynamic advantage and proven reliability.Versatile enough for everyday training and racing the rims are designed for clincher tires. Wide-dish hubs produce maximum stiffness and solid cartridge bearings laced with ultra-bladed straight-pull spokes form a rigid connection between the rim and hub.The rear hub has a double-sided thread so two cogs can be used on the same wheel making gear changes fast and easy. Key benefits Train and race with a reliable aero advantage. 30mm deep aluminum welded rim offers unbeatable aerodynamics. Low spoke count (20 front and rear). Ultra-bladed spokes. Quick acceleration maximum power transmission and low rolling resistance. Front and rear dishes optimized for incredible stiffness. QRM+ cartridge bearings ensure maximum rolling efficiency. Change tires and swap gears quickly and easily. Rear “flip-flop” hub lets you adjust your gearing depending on the track. Clincher rims for convenient tire changes. Spokes Count: 20 front and rear Lacing: front radial rear crossed 2 Nipples: brass ABS Shape: straight pull flat Material: steel Nipples: steel ABS Rims Tire: clincher Material: S6000 Aluminum Valve hole diameter: 65 mm Height: 30 mm ETRTO size: 622x15C SUP welding technology Drilling: traditional Internal width: 15mm Delivered with User guide Rim tape Fixing nuts Cog lock nut Multifonction adjustment wrench (delivered with rear wheel) Hubs Fixed cog Axle material: steel Front and rear bodies: aluminum QRM+ bearing preload technology Intended use Recommended tire sizes: 18 to 25 mm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Minimum cog width : 75mm Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 84bar/121PSI with a 23mm tyre - 785bar/114PSI with a 32mm tyre Versions Color: Black only Compatibility Freewheel: fixed cog only flip-flop hub (one cog possible on each hub side) Cog thread: 137x24TPI Lock ring thread: left thread M33x1 Front axle: for fixing nuts only (included) M9x1 thread Rear axle: for fixing nuts only (included) M9x1 thread Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
Mavic E-Deemax Pro E-MTB Rear Wheel (Boost)This E-MTB rear wheel features a hard-wearing maxtal aluminium rim construction with SUP welding technology, which gives it fantastic toughness and durability as you weave your way from trail to trail. Mavic has also kitted out this model with a hookless rim profile for additional strength, while its tubeless-ready technology allows you to run lower tyre pressures for increased stability, comfort and fewer risks of flats or punctures. Coming complete with 6-bolt disc brake compatibility, this is a great choice of upgrade for electric mountain bike riders who want powerful and responsive braking performance as they dominate their way around the mountain.Features: Rim Material: Maxtal Aluminium with SUP welding technology Use: Electric Mountain Bike (E-MTB) Axle Size: 12x148mm, Boost Internal Rim Width: 28mm ETRTO: 584x28TSS Rim Profile: Hookless Drilling: Fore Tubeless Ready: Yes Tyre Compatibility: Hookless compatible UST Tubeless and tubetype Recommended Tyre Sizes: 50mm to 76mm (2.0" to 3.0") Valve Hole Diameter: 6.5mm Spoke Material: Zicra Spoke Count: 24 Spoke Shape: Straight pull, flat drive side; Flat, double-butted non-drive side Wheel Hub Body: Aluminium Freewheel: Instant Drive 360, Steel Freehub Compatibility: Shimano Bearings: Auto adjust sealed cartridge bearings (QRM Auto) Brake Compatibility: 6-bolt disc brake Max Rider Weight: For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg, bike included ASTM Category 4: Enduro and trail riding Weight Reduction: ISM 4D Single or Pair: Single rear wheelManufacturer's Part Number: LR2783100 Black 27.5" ShimanoBuy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.