The Antigram 36 hole rear hub is strong and light with a female axle that is both RHD/LHD switchable and comes with a replaceable hub guard. The Antigram is laced to the fully welded joint construction Odyssey Hazard Lite rim with directional spoke hole drilling and trademarked cross-section design. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Antigram Cassette AXLE: 17mm 4130 chromoly female axle DRIVE SIDE: Left & Right Switchable RIM: Odyssey Hazard Lite SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: TBC
Spank SPOON 32 Rear WheelThis MTB rear wheel features a durable alloy construction, which makes it ideal at handling all the abuse that comes with riding across the mountain bike trails. Coming equipped with a shotpeen finish, this trail-ready model also allows you to enjoy its exceptional strength and stiffness on the roughest of terrain conditions. One final highlight is its corrugated rim centre, which makes it more rigid as well as allowing the rim to be wider without adding more material.- Bombproof all-purpose rear wheel, hand built, 32H J-hook configuration with 3-cross spoke pattern. - The corrugated rim center, a brand acclaimed technology, makes it more rigid and allows the rim to be wider without adding material.- Shotpeen finish to increase fatigue life and make it more durable. - Delivers exceptional strength and stiffness at a value unmatched in its class. Features: Material: Alloy Use: MTB Freehub: SH ERD (mm++) / ETRTO (mm): 26": 526 / 559x26.7; 27.5": 551 / 584x26.7 Dimensions: Inner: 26.7mm; Outer: 32mm Spokes: J-Hook, brass nipples Tubeless Ready: No Valve: A/V Schrader Configuration: 32H - 3cross lacing Technologies: OohBah Inverted Inner WallBuy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank 359 Boost XD Rear Mountain Bike WheelOptimised for downhill (DH) racing, this rear wheel features 12x148mm Boost hub spacing, tubeless-ready rims and is compatible with SRAM XD cassettes. Coming complete with tubeless tyre compatibility, this rear wheel also allows you to enjoy its superior traction and control, without adding any unnecessary weight to your ride.Features: Material: Alloy Use: MTB, Downhill ERD: 27.5": 560mm; 29": 598mm ETRTO: 27.5": 584x30.5mm; 29": 622x30.5mm Rim Dimensions: Inner: 30.5mm; Outer: 35mm Spokes: 28 Straight, triple butted 2.2/1.8/2.0, brass external nipples Tubeless: Tubeless equipped (tape and valves included) Presta: F/V Presta Configuration: 28H - 3cross lacing Hub: 12x148mm Boost, SRAM XD driver Single or Pair: Single Technologies: Radial Compliance, Torsional Strength, Lateral Stiffness, BeadBite Anti-burp, OohBah Inverted Inner Wall Weight: 27.5": 1.1kg (approx); 29": 1.13kg (approx)Technologies: World Cup DH developed and proven, Tuned rear wheel weight-optimised for race. Unique front profile enhances radial compliance and reduces weight on the rear wheel, while increasing responsiveness and durability. The radial compliant design adds traction and reduces wheel deflection, and negative feedback, without compromise to strength or lateral stiffness. 30.5mm inner width allows versatile tyre fitting from 2.0” to 2.6” perfectly, without negative squaring off of tyre profiles.Buy Spank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mavic Aksium Disc INT WheelsetThe Mavic Aksium Disc Wheelset provides top end Mavic road bike technology that will make any bike better. Featuring straight pull spokes, lightweight and stiff rims, serviceable cartridge bearings and now, the Aksium wheels are disc brake compatible.Outstanding Reliability and StiffnessThe Aksium may be the entry level road wheelset that Mavic offer, but catering for disc brakes and being built using industry leading processes, these wheels offer great versatility, outstanding reliability and stiffness combined with exceptional stopping power. The Aksium wheels are truly a great option to consider for training, wet and wintery conditions, for commuting and for use with your second bike, even if you are on a budget.Features:Rims: Material: S6000 Aluminium Height: 22mm Joint: Pinned Drilling: Traditional with H2 reinforcement Profile: Disc brake specific Valve hole diameter: 6.5mm Tyre Type: Clincher ETRTO: 622x17C Recommended Tyre Width: 25 to 52mmSpokes: Material: Steel Shape: Straight Pull, round Nipples: Brass, ABS Count: 24 front and rear Lacing: Front and Rear 2-crossHubs: Hub Body: Aluminium Axle Material: Aluminium front, Steel rear Bearings: Sealed cartridge Freewheel: FTS-L steelWeight: Front: 890g Pair: 1.96kg Rear: 1.07kgDelivered With: Rim tape Front QR adapters User guideTechnologies: FTS-L: Force Transfer System Light Reinforcement of key transmission components: the contact area between the pawl and the hub body is reinforced by 2 stainless steel inserts, which allows the use of a 100% aluminium hub body. QRM: Qualité de Roulements Mavic Mavic only uses high quality sealed cartridge bearings. On QRM wheels, they feature double sealing (2RS or LLU) together with tight C3 internal clearance. H2: Hammer Hardening is used for strengthening of the rim in the area where the spokes exert the greatest stress. This results in a much stronger and more reliable rim to spoke interface.Buy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mavic Allroad Disc Gravel WheelsetFeaturing two high-quality S6000 aluminium rims for maximum strength and reliability on every mile, this wheelset is specifically designed for gravel adventure riding. With a wide rim profile in a 650B or 700c diameter to choose from, this UST Road Tubeless wheel system is built for adventure on the roughest terrain. Perfect for riding on rough roads, gravel or dirt, it gives you the smooth-riding performance of tubeless tyres and makes it easy to set them up without any hassles. Low rolling resistance and a reduced risk of punctures add up to a better overall riding experience, especially on rugged terrain. The wheels are engineered for the unique demands of disc brakes, built up with 24 straight-pull spokes, which are stronger than J-bend spokes. So wherever the road goes, and however rough it gets, you're ready to keep things rolling.UST Tubeless TechnologyTraction and control Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats.Instant Drive 360 Freewheel TechnologyThe new Instant Drive 360 freewheel system is super light and efficient. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile.QRM Auto Bearing Preload TechnologyQualité de Roulements Mavic Auto Our latest innovation. Those cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play on the long run.Features: Rim Material: S6000 Aluminium Axle Size: Front: 12x100mm; Rear: 12x142mm Use: Road, Gravel Internal Rim Width: 650B Option: 25mm; 700C Option: 22mm Rim Joint: Sleeved Valve Hole Diameter: 6.5mm Tyre Compatibility: Clincher ETRTO: 650B Option: 584x25TSS; 700C Option: 622x23TC Spokes Material: Steel Spokes Shape: Straight pull, round Spoke Nipples: Steel, ABS Spoke Count: 24 front and rear Spoke Lacing: Front and rear crossed 2 Front and Rear Hub Bodies: Aluminium Axle Material: Aluminium Front Axle: Quick release, 12x100 and 15x100 thru-axle compatible Rear Axle: Quick Release, 12x142 and 12x135 compatible Freehub: Shimano Infinity Hubs: Infinity hubs on 650B option only ATSM Category: 2: Road and offroad with jumps less than 15cm Recommended Tyre Sizes: 28 to 64mm (1.1" to 2.5") Max Pressure: See indication on wheel and tyre. If they differ, use the lowest of the two. Delivered With: Front QR adapters (700c Option only), Rear QR adapters for Instant Drive 360 (700c Option only), UST valve and accessories, Pre-installed tubeless rim tape and User guide Brake Type: Disc brake Disc Mount: Centre Lock Single or Pair: Pair Instant Drive 360 freewheel technology QRM Auto bearing preload technology Weight: 650B Option: 1840g (Pair); Front: 860g; Rear: 980g; 700c Option: 1890g (Pair); Front: 870g; Rear: 1020gManufacturer's Part Number: P1586155 Black 27.5" 650B Shimano P8699155 Black 700c ShimanoBuy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mavic Aksium Road Disc WheelsetDesigned for reliable everyday performance, this road bike wheelset features two hard-wearing S6000 aluminium rims for a smooth and efficient ride quality. Coming kitted out with a range of ride-enhancing technologies such as Instant Drive 360 Freewheel Technology and QRM Auto Bearing Preload Technology, this model offers excellent versatility and smooth-rolling properties as you tackle every mile. It also adds confidence and control thanks to its addition of Centre Lock disc brake compatibility for powerful, and reliable braking performance.Aksium is a great choice for everyday road riding. With a smart balance of high-quality materials and durable construction, it offers aspiring road riders the clear performance benefits of a high-quality wheelset. This Aksium Disc model includes special features aimed at the unique demands of disc brake road bikes. It uses straight-pull spokes for added stiffness and strength, and the brand also increased the spoke count to 24 on both front and rear wheels.With a 17mm internal width, these rims are compatible with tyres up to 32mm, making them versatile, comfortable and ideal for challenging road conditions. The disc-specific hubs feature super strong QRM bearings that provide low friction and long-term durability. The Aksium Disc is made for standard quick release and is compatible Centre Lock brake rotors.Instant Drive 360 Freewheel TechnologyThe new Instant Drive 360 freewheel system is super light and efficient. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile.QRM Auto Bearing Preload TechnologyQualité de Roulements Mavic Auto Our latest innovation. Those cartridge bearings are of course double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play on the long run.Features: Rim Material: S6000 Aluminium Axle Size: Front: 12x100mm; Rear: 12x142mm Use: Road Internal Rim Width: 17mm Rim Height: 21mm Rim Diameter: 700c Rim Joint: Pinned Rim Drilling: Traditional Valve Hole Diameter: 6.5mm Tyre Compatibility: Clincher ETRTO: 622x17C Spokes Material: Steel Spokes Shape: Straight pull, round Spoke Nipples: Steel, ABS Spoke Count: 24 front and rear Spoke Lacing: Front and rear crossed 2 Front and Rear Hub Bodies: Aluminium Axle Material: Aluminium Front Axle: Quick release and 12x100 thru-axle compatible Rear Axle: Quick Release, 12x142 and 12x135 compatible Freehub: Shimano ATSM Category: 2: Road and offroad with jumps less than 15cm Recommended Tyre Sizes: 25 to 32mm Max Pressure: See indication on wheel and tyre. If they differ, use the lowest of the two. Delivered With: Front QR adaptors, Rear QR adaptors for Instant Drive 360, Rim tape and User guide Brake Type: Disc brake Disc Mount: Centre Lock Single or Pair: Pair Instant Drive 360 freewheel technology QRM Auto bearing preload technology Weight: 1905g (Pair); Front: 870g; Rear: 1035gManufacturer's Part Number: P8693155 Black 700c Shimano Buy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Rig 9800 is the industry’s most elite fully loaded travel bag available. Durable construction and thoughtfully designed features make the Rig perfect for a trip to the track a trek across the globe and everything in between. Heavy Duty over-sized wheels with extra clearance deliver a smooth ride and easy handling in any terrain. Multi-use LID compartments provide smart storage and easy access for all of your belongings. No matter your destination the Rig 9800 will make sure your gear gets there smoothly and safely. Nothing compares to this legendary Travel Bag. The Rig 9800 Travel Bag stands alone as the king of all gear bags. Its durability and impressive list of features are legendary. Whether it’s a trip to the track or a trek across the globe grab the Rig for your next adventure. SLED (Structural Load Equalizing Deck) System for increased durability and handling in the harshest of conditions Wide mouth LID opening for easy access to all gear compartments Large main compartment with adjustable dividers and padded helmet chamber Several multi-use LID compartments for apparel and smaller gear iFOM (integrated foam) construction throughout for added gear protection Heavy duty oversized wheels with extra clearance Secure hold compression strap system Telescoping pull handle Specs Dimensions 34' H x 16.5' W x 15.25' D Weight 6.4kg Capacity 123 Litres
Completely redesigned from the ground up, the Nukeproof Horizon V2 Rear Wheel 102t delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series.This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better.Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in.A full range of spares are available to service your hub in the future.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:Rear 27.5" Wheel: Non-Drive Side: 271, Driveside: 268 Rear 29" Wheel: Non-Drive Side: 289, Driveside: 286 Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail / All Mountain / Enduro / DH,Rim Width: Inner: 30mm; External: 35mm; Rim Height: 21.6mm,Spacing Options: 142x12mm; 148x12mm; 150/157x12mm,Conversion options: 142x12mm can be converted to 135mm QR, 148x12mm can be converted to 141mm Boost with end caps (sold separately),Rear hub engagement: 102 points of engagement (every 3.52 degrees),Freehub options: Shimano HG, Shimano Microspline, SRAM XD,Spoke Type: J-Bend; Spoke count: 32; Lacing pattern: 3x,Disc Mount: 6-Bolt,Tubeless Ready: Yes - Pre-taped and valve supplied;,Build: Handbuilt .
Completely redesigned from the ground up, the Nukeproof Horizon V2 Rear Wheel 102t delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series.This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better.Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in.A full range of spares are available to service your hub in the future.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:Rear 27.5" Wheel: Non-Drive Side: 271, Driveside: 268 Rear 29" Wheel: Non-Drive Side: 289, Driveside: 286 Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail / All Mountain / Enduro / DH,Rim Width: Inner: 30mm; External: 35mm; Rim Height: 21.6mm,Spacing Options: 142x12mm; 148x12mm; 150/157x12mm,Conversion options: 142x12mm can be converted to 135mm QR, 148x12mm can be converted to 141mm Boost with end caps (sold separately),Rear hub engagement: 102 points of engagement (every 3.52 degrees),Freehub options: Shimano HG, Shimano Microspline, SRAM XD,Spoke Type: J-Bend; Spoke count: 32; Lacing pattern: 3x,Disc Mount: 6-Bolt,Tubeless Ready: Yes - Pre-taped and valve supplied;,Build: Handbuilt .
This exclusive bundle includes a Prime Baroudeur Wheelset, two Vittoria Corsa Rubino Pro IV tyres and Lifeline sealant 150ml. In bike racing, the Baroudeur is a breakaway specialist, a fighter, a chancer, an opportunist and the one, in many cases, who makes the legs of the peloton hurt. The high-performing Prime Baroudeur wheelset with its wide tubeless-ready rims is one of the strongest and lightest on the market, meaning you'll be putting the peloton under pressure in no time. Lightweight & Durable The Prime Baroudeur Road Wheelset weighs in at only 1516g, making it a truly lightweight wheelset. However, due to the high-quality components, they are extremely tough and reliable. Aerodynamic They feature a 19mm internal rim to improve aerodynamics with wider tyres and an SR2 J-Bend hub set, which rolls perfectly, even on rougher roads. Built using J-Bend and DT Swiss Pro Lock nipples, which guarantee stiffness and durability, the Baroudeurs are ideal for long training rides or fast-paced racing. In The Box: Prime Baroudeur Wheelset x2 Vittoria Corsa tyres, Rubino Pro IV. 25-622, tubeless ready TLR, full black and G2.0 Lifeline sealant 150ml Tubeless Valves QR Skewers 10 speed spacer Prime Carbon Brake Pads Spoke Length: Front Drive Side: 282mm, Front Non-Drive Side: 282mm Rear Drive Side: 284mm, Rear Non-Drive Side: 289mm Bearings Front: 2x 689 Sealed Cartridge Bearings Rear: 1x 6802 & 1x 15267 Sealed Cartridge Bearings Freehub: 2x 6902 Sealed Cartridge Bearings Rim ERD 586mm Spares (available separately) Prime Bearing Kits https://www.wiggle.co.uk/prime-rr-ceramicspeed-bearing-kit/ https://www.wiggle.co.uk/prime-r020-front-hub-bearing-kit/ https://www.wiggle.co.uk/prime-r020-rear-hub-bearing-kit/ https://www.wiggle.co.uk/prime-r020-freehub-bearing-kit/ Prime Freehubs https://www.wiggle.co.uk/prime-xdr-freehub/ https://www.wiggle.co.uk/prime-r010-r020-freehub-body-campagnolo/ https://www.wiggle.co.uk/prime-r020-freehub-body-abg/ Prime Crash Replacement Programme At Prime we understand that a crash or unexpected accident may occur under normal riding conditions. If in the event of a fall or accident where your Prime product sustains damage beyond repair, you can return the damaged component in exchange for a new product at 40% off the RRP. Please note that the Prime Crash Replacement Programme is only valid for the original purchaser within 2 years of purchase.
This exclusive bundle includes a Prime Baroudeur Disc Alloy Wheelset, two Vittoria Rubino Pro tubeless ready tyres and Lifeline sealant 150ml. In bike racing, the Baroudeur is a break away specialist, a fighter, a chancer, an opportunist and the one, in many cases, who makes the legs of the peloton hurt. The high-performing Prime Baroudeur Disc Wheelset, with its wide tubeless ready rims, is one of the strongest and lightest on the market, meaning you'll be putting the peloton under pressure in no time. Lightweight & Durable The Prime Baroudeur Road Wheelset weighs in at only 1585g, making it a truly lightweight wheelset. However, due to the high-quality components, they are extremely tough and reliable. Aerodynamic They feature a 30mm deep, 19mm internal rim to improve aerodynamics with wider tyres and an R020 hub set, which rolls perfectly, even on rougher roads. Built using Pillar Spokes and DT Swiss Pro Lock nipples, which guarantee stiffness and durability, the Baroudeurs are ideal for long training rides or fast paced racing. Optimal Braking Performance Disc brakes generate an incredible amount of stopping power, even in wet conditions, so you can fly up the hills and decend with confidence knowing that the Prime Baroudeur Road Disc Wheelset can handle even the fastest descents. In The Box: Prime Baroudeur Disc Alloy Wheelset x2 Vittoria Rubino Pro IV tyres, 28-622, tubeless ready TLR, full black, G2.0 Lifeline sealant 150ml Tubeless Valves 10 speed spacer 15mm thru axle end caps Note: QR end caps and conversion kits sold separately. Spoke Length: Front Drive Side: 283mm, Front Non-Drive Side: 280mm Rear Drive Side: 280mm, Rear Non-Drive Side: 283mm Bearings Front: 2x 6902 Sealed Cartridge Bearings Rear: 2x 6902 Sealed Cartridge Bearings Freehub: 2x 6902 Sealed Cartridge Bearings Rim ERD 576.6mm Spares (available separately) Prime Disc Brake Conversion Kits (Front) https://www.wiggle.co.uk/prime-rd020-conversion-kit-qr-x-100mm/ https://www.wiggle.co.uk/prime-rd020-conversion-kit-12mm-x-100mm/ https://www.wiggle.co.uk/prime-rd020-conversion-kit-15mm-x-100mm/ Prime Disc Brake Conversion Kits (Rear) https://www.wiggle.co.uk/prime-rd020-conversion-kit-135mm-x-qr/ https://www.wiggle.co.uk/prime-rd020-conversion-kit-12mm-x-142mm/ Prime Bearing Kits https://www.wiggle.co.uk/prime-rr-ceramicspeed-bearing-kit/ https://www.wiggle.co.uk/prime-rd020-front-hub-bearing-kit/ https://www.wiggle.co.uk/prime-rd020-rear-hub-bearing-kit/ https://www.wiggle.co.uk/prime-rd020-freehub-bearing-kit/ Prime Freehubs https://www.wiggle.co.uk/prime-xdr-freehub/ https://www.wiggle.co.uk/prime-rd020-freehub-body-abg/ https://www.wiggle.co.uk/prime-rd010-rd020-freehub-body-campagnolo/ Prime Crash Replacement Programme At Prime we understand that a crash or unexpected accident may occur under normal riding conditions. If in the event of a fall or accident where your Prime product sustains damage beyond repair, you can return the damaged component in exchange for a new product at 40% off the RRP. Please note that the Prime Crash Replacement Programme is only valid for the original purchaser within 2 years of purchase.
Hope Fortus 30 Mountain Bike Rear WheelA strong, durable and fast-rolling rear-wheel designed with mountain bike trails in mind, the Fortus 30 is ready for whatever challenge you meet on the trails. Set on a 30mm-wide, aluminium rim, it gives a durable and dependable performance and benefits from a Hope Pro 4 hub and a four-pawl, ratchet system freehub. End Caps Info- 12x142mm rear wheels come with 135 QR end caps included.- 12x148mm rear wheels do not include any other end caps.Features: Rim Material: Welded 6061 T6 Aluminium rim with eyelets Wheel Diameter: 27.5" Use: XC, Trail Rim Internal Width: 30mm Rim External Width: 35mm Rim Height: 23mm Tubeless-Ready: Yes Spoke Count: 32 Spoke Type: Sapim Race, stainless-steel, J-Bend Hub Type: Hope Pro 4 Freehub: Four-pawl, ratchet system; Shimano or SRAM XD Brake Type: DiscBuy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.