DT Swiss EX1700 Spline 30 Boost Disc Front WheelLaced to double butted competition straightpull spokes, the DT Swiss EX1700 Spline 30 Boost Disc Front Wheel is built to take a beating on the harshest and most challenging mountain bike (MTB) trails. DT Swiss has taken all its aluminium wheel know-how and put it in this high performing package. The EX1700 Spline 30 Boost wheel is based on its famous 36 tooth Ratchet hub, combining it with a super strong and welded 30mm wide aluminium rim. The rim profile is designed to withstand the hardest use of Enduro racing while still keeping the weight low for long and demanding uphills. Laced to double butted competition straight pull spokes, the EX 1700 SPLINE wheel is built to take a beating.Features: Material: Aluminium Rim type: Clincher, Tubeless Compatible Rim Width: Inner: 30mm; Outer: 35mm Hub Type: DT Swiss 350 Hub Width: 15x110mm Boost Brake Interface: Disc brake, CentreLock Spokes: DT competition straightpull - Spoke pattern 3-cross (1:1) Nipples: DT ProLock Squorx ProHead Maximum Recommended System Weight: 130kg (Rider+bike+gear)Buy DT Swiss Wheels&Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR Pro Wheels :All our wheels are designed to be tough and good value, they are available individually allowing a mix and match approach. The range gives a choice of wheels for dirt jump, street riding, downhill or free-ride use..,Build Quality And Spare PartsAll the wheels include DMR rim tape (in red and black of course!) and are built to the same high quality and hand finished to high standard; stress relieved and re-tensioned to ensure a durable tough wheel. The black rims and spokes with deep red anodized hubs look the business too. We carry all the service parts as spares so you can be confident these wheels will keep rolling..,Front32 hole | Cross 3 | 990 grams.,20mm through axle hub, with international standard (6 bolt) disc brake mounts in a choice of red or black with matching spoke nipples..,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,9mm conversion kit available..,REAR - 9 Speed32 hole | Cross 3 | 1290 grams.,10/135mm axle hub with fixing bolts to secure your wheel into your frame (quick release could also be used (not included), with international standard (6 bolt) disc brake mounts and a 9 speed freehub in a choice of red or black with matching spoke nipples..,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,REAR - 1 to 6 Speed32 hole | Cross 3 | 1340 grams.,10/135mm nutted axle hub with international standard (6 bolt) disc brake mounts and a 1 to 6 speed freehub in a choice of red or black with matching spoke nipples. .,Laced onto a DMR Thret Rim using black plain gauge spokes..,Rim tape included..,NB: weight indicated on The rim is to illustrated the weight of the The rim only and does not describe the weight of the fully built 26 Inch DMR Pro wheels..,Single speed spacer kit and cassette shown in images sold separately..,
The Motion freecoaster features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the hub requires less maintenance and is a lot easier to disassemble than most. The nylon retention spring also reduces the internal drag and also enables faster rolling and smoother crankflips. The Motion is laced to a Federal Stance rim. the rim has a wide 40mm cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% from previous models to reduce the possibility of spokes pulling through the rim. Federal have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance.The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres. ###section### Product Specs WHEEL SIZE:20" HUB:Federal Motion Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Federal Stance SPOKES:Butted NIPPLES:Brass WEIGHT:1377g / 48.6oz
The Motion freecoaster features a completely new axle along with a nylon clutch retention spring. By replacing the traditional spring/ball system, the hub requires less maintenance and is a lot easier to disassemble than most. The nylon retention spring also reduces the internal drag and also enables faster rolling and smoother crankflips. The Motion is laced to a Federal Stance rim. the rim has a wide 40mm cross section which is designed to be in keeping with modern tyre sizes which helps the tyre maintain its correct profile. The triple box section combined with the wider profile makes the rim both stronger and stiffer than conventional rims and also helps to reduce the possibility of pinch flats. The wall thickness where the spokes are located has been increased by 22% from previous models to reduce the possibility of spokes pulling through the rim. Federal have also changed the material from Aluminium 6061 to 6066 which increases the strength by approximately 30%. The rims have a lower sidewall height (15mm compared to 20mm on most other rims) to give the rim a lower/wider appearance.The internal sidewall height is also reduced to keep the tyre firmly in place when inflated and the base of the rim is sunken to ease the installation and removal of tyres. ###section### Product Specs WHEEL SIZE:20" HUB:Federal Motion Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Left Side Drive RIM:Federal Stance SPOKES:Butted NIPPLES:Brass WEIGHT:1377g / 48.6oz
Cult Crew Freecoaster hub laced to a Cult Match rim… Comes with non drive side hub guard and Cult carabiner spoke wrench! ###section### Product Specs WHEEL SIZE: 20" HUB: Cult Crew Freecoaster AXLE: 14mm DRIVE SIDE: Right Side Drive RIM: Cult Match SPOKES: 37 NIPPLES: Alloy WEIGHT: TBC
The Reynolds FX2 Freecoaster wheel features the Garrett Reynolds signature rim laced to the updated Cinema FX2 freecoaster hub. Hand laced, 3-cross with 14-gauge stainless steel spokes and brass nipples providing superior strength. This wheel comes standard with a rim strip and both Cinema CR and DR nylon hub guards and keeps Garrett rolling smooth regardless of what he throws at it. ###section### Product Specs WHEEL SIZE:20" HUB:Cinema FX2 Freecoaster AXLE:14mm DRIVE SIDE:Right Side Drive RIM:Cinema Reynolds SPOKES:14-gauge stainless steel NIPPLES:Brass WEIGHT:3lbs 4oz
A complete rear freecoaster wheel built around the proven West Coaster hub and all other top spec BSD parts, the exact same tried and tested wheels that the BSD team uses without the hassle of building them. Includes Jersey Barrier hubguards! ###section### Product Specs WHEEL SIZE: 20" HUB: BSD Male Westcoaster Hub AXLE: 14mm Chromoly Male DRIVE SIDE: Right Side Drive RIM: BSD Nasa SPOKES: BSD Butted NIPPLES: Brass WEIGHT: TBC
A complete rear freecoaster wheel built around the proven West Coaster hub and all other top spec BSD parts, the exact same tried and tested wheels that the BSD team uses without the hassle of building them. Includes Jersey Barrier hubguards! ###section### Product Specs WHEEL SIZE: 20" HUB: BSD Male Westcoaster Hub AXLE: 14mm Chromoly Male DRIVE SIDE: Left Side Drive RIM: BSD Nasa SPOKES: BSD Butted NIPPLES: Brass WEIGHT: TBC
The Stranger Crux V2 freecoaster wheel features a sealed 14mm female RHD freecoaster hub laced to the Crux XL double wall pinned seamed rim. ###section### Product Specs WHEEL SIZE:20" HUB:Sealed Freecoaster 9t AXLE:Female Bolts DRIVE SIDE:Left Side Drive RIM:Stranger Crux XL SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1536g
The Techfire front wheel takes Total's pro level wheel components to create a high end wheel ready to perform at the top level of BMX. Rim tape included. ###section### Product Specs WHEEL SIZE: 20" HUB: Total Tech V2 Sealed AXLE: Female RIM: Total Spitfire SPOKES: Butted NIPPLES: Brass WEIGHT: 960g / 33.86oz
Complete Freecoaster Wheel from Saltplus. Bullt onto a Saltplus Vertex freecoaster hub that Uses Eclat Cortex Internals. this wheel features the tough double wall Mesa rim with straight side walls ###section### Product Specs WHEEL SIZE:20" HUB:Saltplus vertex Freecoaster AXLE:14mm Chromoly Male DRIVE SIDE:Right Side Drive RIM:Mesa Rim SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1179g / 41.6oz
The Fiend Cab V2 Freecoaster Wheel uses the Fiend V2 Cab freecoaster hub laced to a 36 hole 6061 aluminum 3 chamber rim with 14g spokes. 2 x Fiend Nylon hub guards are includes as well as a Fiend rim strip. ###section### Product Specs WHEEL SIZE:20" HUB:Freecoaster AXLE:14mm Male DRIVE SIDE:Left Side Drive RIM:Fiend Double Wall, Welded SPOKES:14g Stainless NIPPLES:Brass WEIGHT:1319g