Park Tool Wheel Alignment Gauge (WAG-5)To get the best performance from your wheels and bike, correctly dished wheels are vital. The Part Tool Portable wheel Dishing Tool makes the checking of wheel dish quick and accurate. You can easily ascertain how centrally the rim sits over the hub, avoiding the issues surrounding a poorly dished wheel, such as frame rub. Features:A sturdy yet portable wheel dishing toolFits wheels from 24 inches - 29 inches in diameter, including 700C road wheelsDisassembles quickly for storage or travelMade in the USALimited lifetime warrantyBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Professional Wheel Alignment Gauge WAG-4For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished”. To check this, and to make precision adjustments, a wheel alignment gauge (also called a “dishing tool”) is a must.An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.Features:The WAG-4 allows easy checking of the dish on road, mountain, or BMX wheels from 16” to 29” (ETRTO or ISO rim sizing of 305-630)Works with any hub widthCan be accurately used with the tire still on the wheelWeight: 1.7lbs. (0.77 kilograms) Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Home Mechanic Wheel Truing Stand (TS-8)Compatible with a wide range of wheel sizes and hub widths, the TS-8 Wheel Truing Stand is perfect for avid home bike mechanics who want to look after their bikes. Helping you to precisely repair, adjust or even build your own wheels, Park Tool’s sturdy design means it can be used standing on its own or bolted down to your workshop bench. Adaptable and Accurate Wheel Truing Featuring a sliding dropout for fast wheel installation, the TS8 can accommodate wheel sizes of 16" to 29", whether they include the tyre or not, making it a fantastically versatile workshop must-have. Made of a flex-resisting, heavy gauge steel for utmost stability and quality, this Park Tool truing stand will dish, or centre your wheel by easily flipping it in the stand. Now you can straighten your wheel from the comfort of your own garage. Features: Material: Flex-Resistant Heavy Gauge Steel Wheel Size Compatibility: 16-29"Hub Size Compatibility: All hub widths up to 170mm Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wheel Truing Stand TS-2.3deal for wheel truing up to 29""+ in size, with or without a tyre fitted, this top-quality workstand is a superb addition to any workshop setup. Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench — still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder coated heavy-gauge steel and is manufactured, assembled and calibrated in St. Paul, Minnesota. Strong, comfortable knobs, spring-loaded calipers, and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.
An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.
This tool offers the ability to measure in metric, decimal inch, and fractional inch so you are never left with a measurement you cannot accurately obtain. Park Tool's Digital Caliper is a precision instrument that will accurately measure seatpost's, headtubes, bearings, spoke diameters, and much more.
Optimised to be more accurate and easier to calibrate and setup, this versatile pro-level truing stand is robust and durable. It’s engineered to accurately self-centre virtually any diameter of wheel size (16" to 29") and any tyre width up to 5"+ without having to remove disc brake rotors. Precise, Accurate and Reliable Professional Wheel Truing Performance Featuring an immensely reliable and long-life construction, this Wheel Truing Stand is built of chrome-plated powder-coated heavy gauge steel and provides flex-free performance. Precisely adjustable and keeps wheels centred with its tall and movable uprights, this immensely accurate design also features direct-action truing calipers. These additional truing calipers allow you to work on the narrowest of rims to the fattest of tyres with superior accuracy with hassle-free functionality. Plus, it is equipped with all the frills you require for the ultimate-adjustability and wheel compatibility - including, a built-in Speed Knob to quickly change axle widths and thru-axle adaptors, and it's equipped with removable and replaceable nylon caliper tips to protect painted and anodised rims.
This detachable, steady base ensures that you get the best and most comfortable view of your wheel when straightening it out, due to its 20-degree tilt range. Built from a composite material base, it will sit flat on any workbench, with in-built slots and compartments to keep the tools and components required for the job right at your fingertips. A fantastic compliment to a great range of truing stands, the Truing Stand Tilting Base TSB-2.2 does a great job in making your realignment work more accurate and professional.
Fitted with four slots to hold a variety of different sized spokes, the BSH-4 ensures they stay strong and in place while you go about your necessary realignment. Pulling double duty as a spoke straightener when used alongside a spoke nipple wrench, the Bladed Spoke Holder BSH-4 from Park Tool does all it can to make sure your spokes and wheels remain in check.
At the smaller end of this specific Park Tool device, you will be able to get to work on 7-spline nipples measuring a 6.4mm outside diameter, such as those found on R-sys wheels. At the larger end is a wrench head capable of fitting 6-spline 9mm FORE drilled rim adapters found on the likes of the Mavic XM819, EX823 and Speedcity wheels. Precision machined and plated for durability and quality, with a vinyl dipped handle for great grip and handling comfort, the Double-Ended Spoke Wrench SW-12 is a great functioning, a specialised tool from Park Tool.