Blank Generation XL BMX WheelsetBlank's Generation XL BMX Wheelset is a serious wheelset that won't break the bank. Featuring a double skin rim for enhanced strength and durability, Blank also opted for a low profile design which gives this wheelset a classic cut. With 6 Pawls and 72 Clicks, it's pretty loud too. Features:Front rim: new Blank Generation XL Double skin Rim; low profile 15.5mm design; 40mm WideFront hub: alloy fully sealed; 10mm female CrMo axle and bolts; 36 holeRear rim: new Blank Generation XL Double skin Rim; low profile 15.5mm design; 40mm WideRear hub: alloy fully sealed; CrMo axle; 4 sealed bearings; 6 pawls; 72 clicks; 36 hole; 9t cassetteSpokes: 36 front and rearBuy Blank Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Octane One Solar Trail Mountain Bike WheelsetOctane One’s Solar Trail MTB Wheelset is a modern, tubeless ready wheelset that rolls on super wide and low rims, resulting in excellent grip and control over rough terrain. Machine built and hand trued, they feature the reliable Orbital hubs, which have proven their quality in the dirt jumping game and guarantee you a problem-free ride. Stiff, strong, and offering incredible value, the Solar Trail wheels are the perfect choice for trail and all-mountain riding.Features: Material: Rim: 6061 T6 Aluminium; Hub: 6061 Aluminium body, 7075 Aluminium hardware; Spokes: Stainless Steel; Nipples: Brass Rim Outer Width: 35mm Rim Inner Width: 29mm Rim Height: 19mm Valve Hole: Presta Proven double pin joint on rim Disc brake only Octane One rim tape included Hubs (Non-Boost Option): Front: Orbital 15x100mm; Rear: Orbital 12x142mm cassette (10/11spd MTB compatible freehub) Hubs (Boost Option): Front: Orbital 15x110mm; Rear: Orbital 12x148mm cassette (10/11spd MTB compatible freehub) Spoke Count: 32 Spokes: Plain gauge 2.0mm Spoke Nipples: Brass, 14mm Spoke Lacing Pattern: 3 cross Rim ETRTO: 27.5”: 584mm; 29”: 622mm Rim ERD: 27.5”: 562mm; 29”: 600mm Use: All-Mountain, Trail Tubeless Ready: Yes (tubeless rim tape and valves are not included but are available separately) Wheelset Weights: 27.5”: front (945g), rear (1070g); 29”: front (975g), rear (1100g)BuyOctane One Wheels & Tyresfrom Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Fortus 35 Mountain Bike Front WheelWith its welded 6061 T6 Aluminium rim that’s 35mm wide for use with “plus” sized mountain bike (MTB) tyres and smooth-rolling Pro 4 hub, the Fortus 35 front MTB wheel can handle anything the trail puts in front of you. Hope has built it up with 32 strong Sapim Race Stainless-Steel double butted spokes and as the rim is tubeless ready, you can run lower pressures for outstanding cornering grip. Get ready to own the trails.Features: Rim Material: Welded 6061 T6 Aluminium rim with eyelets Spoke Material: Black Sapim Race Stainless-Steel double butted spokes Spoke Nipple Material: Silver brass nipples Brake Type: Disc Brake Rotor Mount Type: 6 bolt Rim Internal Width: 35mm Rim External Width: 40mm Rim Height: 18.5mm Rim Effective Rim Diameter (ERD): 27.5": 567mm; 29": 605mm Axle Type: Separate 15x100mm and 15x100mm (bost) options Use: Cross Country (XC), Enduro Trail Tubeless Ready: Yes Spoke Count: 32 Spoke Type: Sapim Race, stainless-steel, J-Bend Hub Type: Hope Pro 4 Recommended Tyre Width: 2.5-3.0" Included: 37mm rim tape, tubeless valve and wipe included for tubeless setup. 100mm and Boost 110mm options are supplied with 15mm end capsBuy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Fortus 35 Mountain Bike Front WheelWith its welded 6061 T6 Aluminium rim that’s 35mm wide for use with “plus” sized mountain bike (MTB) tyres and smooth-rolling Pro 4 hub, the Fortus 35 front MTB wheel can handle anything the trail puts in front of you. Hope has built it up with 32 strong Sapim Race Stainless-Steel double butted spokes and as the rim is tubeless ready, you can run lower pressures for outstanding cornering grip. Get ready to own the trails.Features: Rim Material: Welded 6061 T6 Aluminium rim with eyelets Spoke Material: Black Sapim Race Stainless-Steel double butted spokes Spoke Nipple Material: Silver brass nipples Brake Type: Disc Brake Rotor Mount Type: 6 bolt Rim Internal Width: 35mm Rim External Width: 40mm Rim Height: 18.5mm Rim Effective Rim Diameter (ERD): 27.5": 567mm; 29": 605mm Axle Type: Separate 15x100mm and 15x100mm (bost) options Use: Cross Country (XC), Enduro Trail Tubeless Ready: Yes Spoke Count: 32 Spoke Type: Sapim Race, stainless-steel, J-Bend Hub Type: Hope Pro 4 Recommended Tyre Width: 2.5-3.0" Included: 37mm rim tape, tubeless valve and wipe included for tubeless setup. 100mm and Boost 110mm options are supplied with 15mm end capsBuy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Fortus 30 Mountain Bike Front WheelThis front wheel from Hope features a 30mm wide rim and Pro 4 hub to help you tackle whatever challenges you find on the mountain trail. Made from a strong and durable welded aluminium, the rim offers superb strength and balance. The hard-wearing hub protects you from friction and the Sapim race spokes provide a stiff and responsive performance, no matter how tough the trail.Please note: All wheels come with 15mm and 20mm hub end caps.Features: Features: Welded 6061 T6 Aluminium rim with eyelets Use: XC (cross-country), Trail Rim Internal Width: 30mm Rim External Width: 35mm Rim Height: 23mm Tubeless-Ready: Yes Spoke Count: 32 Spoke Type: Sapim Race, stainless-steel, J-Bend Hub Type: Hope Pro 4 Brake Type: DiscBuy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Front WheelThis MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKHORV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKHORV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKHORV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKHORV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKHORV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKHORV2END2015NB Convert 20mm non boost hub to 15mm non boost Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g; 29” 15mm Boost: 897g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Front WheelThis MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKHORV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKHORV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKHORV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKHORV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKHORV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKHORV2END2015NB Convert 20mm non boost hub to 15mm non boost Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g; 29” 15mm Boost: 897g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Front WheelThis MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKHORV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKHORV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKHORV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKHORV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKHORV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKHORV2END2015NB Convert 20mm non boost hub to 15mm non boost Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g; 29” 15mm Boost: 897g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
BB30 to outboard bottom bracket with ceramic bearings,Eliminates the need for adaptors,Serviceable, double lip sealed ceramic Enduro bearings,High precision Grade 5, SI3N4 pure ceramic balls,Designed for racing or indoor use only,Requires regular servicing,USA machined aluminium shell for superior function and durability,Threaded design for easy installation and removal.
PressFit 30 to outboard bottom bracket with Ceramic bearings - compatible with 22 mm axles,Eliminates the need for adaptors,Serviceable, double lip sealed Enduro bearings,USA machined aluminium shell for superior function and durability,Threaded design for easy installation and removal,Fits 68 - 73 mm width shells,Black anodized.
Aerorage Track WheelsUsing the outstanding Halo (120mm rear width) track hubs and precision built together using 32 reliable plain 14gauge spokes combined with the Halo Aerorage Mid size Aero road rim.,Light and strong with an attractive mid size 25mm Aero section.,CNC machined finish brake surface..Available in Black anodised or Powder coat white.1 Front and 2 rear options in the following colour options;a) Black hub, rim and spokes.,b) White hub, White rim and black spokes..Black or White hubs, front, rear double fixed or fixed/free options.As usual, all Halo wheels will be individually boxed.Black wheel weights;Front : 971g,Rear: 982g.White;Front: 992g,Rear: 1042g.Front Axle Thread 9x1.,Rear Axle Thread 10x1..Note: General Fixed sprocket check:For correct fixed use, the fixed sprocket should NEVER move on the hub when pedal force is applied in both directions.,i.e. if the sprocket moves, then something is wrong.,Continued use with a fixed cog that moves will result in damage to the hub..
Key Features:This RS330 clincher wheels offers aero performance and excellent quality at a competitive price.30 mm high profile aluminium rim for improved aero dynamics.16 front stainless steel butted and bladed straight pull spokes with a radial lacing pattern.Elbow-less spokes make for a strong yet compliant wheel.High lateral rigidity is produced increased by wide flange spacing.Smooth high polished finish hub shell.The hub uses angular contact bearings designed to cradle the balls giving both radial and lateral support for superior strength and durability in real world riding conditions. They also offer precision bearing adjustment and easy maintenance.Labyrinth and contact sealing - low-friction seals effectively shut out water, mud and dirt without affecting rotational smoothness.Supplied with Q/R skewer.