Shimano Dura-Ace R9200 12 Speed Power MeterWith a rechargeable battery and Bluetooth LE and ANT+ connectivity, the Shimano Dura-Ace FC-R9200-P power meter is a user-friendly training partner. A vital tool for serious cyclists, this model delivers reliable, waterproof, dual-sided power measurement. Bluetooth LE and ANT+ ConnectivityThe Dura-Ace FC-R9200-P power meter brings everything a data-driven cyclist could want. Its integrated, waterproof design brings all-weather reliability while delivering accurate information including left/right balance. A rechargeable Li-ion battery is user-friendly and Bluetooth LE and ANT+ connectivity ensure easy setup.Hollowglide Chainring TechnologyWith hollow technology on the outer chainring, its Hollowglide construction ensures high rigidity while its hollow structure cuts down on weight yet maintains strength. This provides better power transfer and quicker and more precise front shifting performance.Hollowtech II Forged Crank ArmsA lightweight crankset not only reduces your bike's weight but decreases rotating mass to aid in acceleration. The challenge is to reduce the weight of the crank without reducing its strength and rigidity.Shimano's advanced forging technology has solved the problem through the Hollowtech crank. Just like high-quality frame tubing, a hollow crank arm can provide amazing strength and rigidity at a very lightweight.The Best Balance of Stiffness, Strength and WeightThe concept of Hollowtech II technology is focused on producing a superior crankset that will maximise your power transfer. The rigidity of the crankset ensures pedalling efficiency while its low weight, a key element of the crankset, aids in cycling longer distances over which you need to pedal more. Naturally, Shimano strove for the optimum balance between the conflicting needs of stiffness while producing a lightweight crank.The addition of Hollowtech II technology integrates the bottom bracket axle with the right crankarm for more stiffness and weight savings to achieve a high-dimensional balance. Its outboard bottom bracket bearing system provides better weight distribution and more pedalling stability, allowing for more efficient power transfer.The Shimano Dura-Ace R9200 12 Speed Power Meter has been developed by pursuing the optimum balance of stiffness & rotating performance in a lightweight and beautiful crankset design.Features: Series: DURA-ACE R9200 Series Integrated, waterproof, and rechargeable Li-ion battery Up to 300+ hours of ride time *Depending on ANT+/BluetoothLE settings Accurate data collection 1.5% strain gauge accuracy throughout the entire calibration range *Depending on ANT+/BluetoothLE settings Proprietary strain gauge Possible to start quickly Simple zero offset calibration with switch on the transmitter Active temperature compensation The software automatically compensates for temperature changesA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hardtail mountain bikes are very British which is why we love them! From their practicality and easy maintenance to their progressive geometry and playfulness.The Black Rocks HT was developed with our love of hardtail MTB’s and a desire to hone in on off road skills and line choices. This all new series is your bridge to better terrain and more challenging conditions. It is designed with modern, long and low geometry, often found on aggressive Trail/Enduro bikes, with all the key points considered.Aggressive trail geometry,Boost axle spacing,30mm wide rims,Dropper seat post,1 x drive train.
SRAM Red eTap AXS 2 x 12 Speed Road GroupsetWith this Road Groupset from SRAM, you're always in control thanks to its eTap shift logic and streamline gear progression. AXS gives you the option to tailor this groupset from your phone, allowing you to personalise your ride every time. Kitted out with Orbit technology for enhanced chain management and unrivalled disc brake performance thanks to the HRD platform, this groupset is the ideal upgrade for your road bike.Groupset Includes:SRAM Red eTap AXS front and rear shifters (for use with cable operated brakes)SRAM Red eTap AXS rear derailleur and batterySRAM Red eTap AXS front derailleur and batteryCharger and cordQuick start guideFeatures:Speed: 12 SpeedUse: RoadTechnologies:Changing Shift Modes During A Ride: So, you want to use an enhanced shift mode (Compensating or Sequential) and switch back to manual shifting mid-ride? You can do that in less than a second (seriously) without ever touching your smartphone.No Worries Riding Rough Roads: eTap AXS rear derailleurs all come equipped with Orbit™ fluid dampers on the pulley cage for a quiet ride and outstanding chain security. Here’s the secret to how you service it… do nothing. It never requires any maintenance.Getting A Perfect Brake Lever Fit and Feel Is Easy: Hidden under the top of eTap AXS HRD brake hoods is a brake lever Contact Point Adjustment feature.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Meta HT JR Kids is ideal for younger riders who are just getting serious and for smaller adult riders who want a smaller bike or smaller wheels. The Meta HT JR features a durable, lightweight, and stylish alloy frame that rolls upon 26"" wheels and is equipped with a SRAM EX Eagle 1x12-Speed groupset with a wide-ranging 11-50T cassette and powerful SRAM Level hydraulic disc brakes. Commencal may have titled this bike as "Junior" and "Kids", but it outperforms most adult bikes on the market. The Meta HT JR (Junior) range benefits from a complete overhaul. Until now offered with 27.5-inch wheels, the JR moves to 26 inches. With the arrival of the XS range, geometries, kinematics, and sizes have been revised and shortened, and are now intended for people measuring between 135 cm and 150 cm. Whether the bike fits a teenager or a shorter adult, they can expect to be able to ride it hard. More than ever, there are no compromises on the quality and performance of the frames or components. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The Scout 275 Comp features a robust but lightweight alloy frame that's kitted out with excellent components to keep you composed and in control regardless of whatever the mountain throws your way. It has 140mm-travel Marzocchi Bomber Z2 suspension forks to soak up hits from the trail while retaining exceptional front-wheel traction in all weather conditions. Backed up by a smooth-shifting Shimano Deore 12-Speed groupset with a wide-ranging 10-51T cassette hydraulic disc brakes - this groupset ensures you have reliability and power when climbing and descending. It is also armed with custom-built Tubeless Ready Nukeproof Neutron V2 / WTB KOM Trail i30 wheels wrapped in Schwalbe Magic Mary and Hans Dampf tyres. The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike, being creative with the trail ahead and reading natural features to generate speed. One thing is for sure though; you shouldn’t underestimate what this hardtail is truly capable of. The all-new Scout is a graduate of the school of gravity. Its geometry is on the “aggressive” side of the coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof’s Saddle Offset theory, will propel you efficiently up the trail-ready for the gnarliest descent you can handle. The new geometry adds to the all-around capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame that is ready to scout out endless singletrack, session technical enduro trails, or just hoon around like you’re auditioning for the latest “Scoutin’ About” video epic. The Nukeproof Scout is the embodiment of the Nukeproof attitude. When riding a Scout, you become part of something special and every ride of this hardcore hardtail rewards every last drop of your skill and commitment. You are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership. The New Scout, welcome to the world of Scoutin’ About, it really is an attitude. The 3rd generation of the Scout has been tweaked to be the finest vintage of Scout. Key Upgrades Include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails The all-new Nukeproof Scout builds on the cult-like “Scoutin’ About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikers Features: Frame: Nukeproof Scout 275, custom triple butted hydro-formed Alloy, internal cable routing for dropper seat posts, ISCG 05 mount, threaded 73mm BB, Boost 148mm rear axle spacing, includes 3D Contoured Rubber Frame Protection for Down Tube, Seat Stay and Chain Stay Fork: Marzocchi Bomber Z2, 140mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black Front Wheel: Nukeproof Neutron V2 Hub 15x110mm, built onto a 27.5” WTB KOM Trail i30 TCS 2.0 Rim, 32H Rear Wheel: Nukeproof Neutron V2 Hub 148x12mm, Shimano freehub with 36 points of engagement, built onto a 27.5” WTB KOM Trail i30 TCS 2.0 Rim, 32H Tyres: Front: Schwalbe Magic Mary, Snakeskin, TL Easy, Addix Soft, 27.5x2.6"; Rear: Schwalbe Hans Dampf, Snakeskin, TL Easy, Addix Speedgrip. 27.5x2.6" Crankset: Shimano Deore M6100 12 Speed Crank, 170mm, 32T, 52mm Chainline Shifter: Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano Deore M6100, SGS 12-Speed, Shadow Plus Chain: Shimano Deore M6100 12-Speed Cassette: Sunrace 12-Speed,11-51T Brakes: SRAM DB8 4-Pot brakes Front Rotor: SRAM Centerline, 200mm Rear Rotor: SRAM Centerline, 180mm Handlebars: Nukeproof Neutron V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Neutron AM, 45mm, black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop Headset: Nukeproof Warhead, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: TBC Specification: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm Axle to Crown: 532mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Max Chainring: 34T (32T Oval) Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
The RUUT AL 1 feautres a strong and lightweight custom formed 6061-alloy frame, TwinTip 2.0 Carbon forks that offer adjustable geometry and it is equipped with a SRAM Apex 1 groupset. This SRAM 11-Speed gear set has a wide-ranging 11-42-tooth cassette for steep hill climbs and all-condition efficiency while the hydraulic disc brakes ensure superb stopping power in all weather conditions. It also rolls upon Tubeless Ready Rondo Aluminium wheels wrapped in fast-rolling and high-grip Vittoria Terreno Dry tyres. The RUUT AL1 is the most versatile bike in the Rondo collection. It’s a hardcore commuter, training partner, adventure seeker, and cyclocross racer all in one. With new classy colours, the RUUT AL1 features a light yet wrecking ball-tough frame, a Selle Italia Model X saddle for comfort over rough surfaces, a bomb-proof drivetrain, and all the fender, rack, and cargo mounts that an adventure rider needs. This bike has a TwinTip 2.0 fork made with FLY technology. A lighter, horizontally stiffer, and more compliant edition of Ronodo's trademark fork. Internal cable routing gives a clean appearance. Versatile and reliable 700 X 40 Vittoria Terreno Dry tyres offer superior grip on varied terrain. This bike is the perfect companion for spontaneous tarmac to trail exploration. Agile and Durable Adventure Gravel Bike The RUUT range was born from the need to have a do-it-all bike. One that would be comfortable enough for backpacking and long-distance riding, but at the same time would retain a clearly sporty character. The crew at Rondo are all competitive cyclists - they ride fast, they race - but they don't need a bike for the Cyclo Cross (CX) World's. What they want from a drop-bar bike is to be able to go long, and go fast, especially on rough roads. So, after over two years of development, they came up with a tool that we believe is the ultimate solution for real-world riders. Twin-Tip Fork Technology Easy-Adjust Geometry This bike features Rondo’s “TwinTip” forks, which enable the rider to change the geometry to suit the terrain/riding type. This is thanks to their adjustable dropouts, which can be set in the “HI” setting for steeper angles for a low and aggressive road bike feel, or the “LO” setting for a slightly longer wheelbase and slacker angles, making it ideal for endurance or off-road adventure riding. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
This touring bike features a durable, robust and stylish Tange Champion Steel frame, an ultra-reliable and smooth shifting SRAM Apex 11-Speed groupset, disc brakes and superbly stable, flex-free and lightweight Rondo Superlight wheels wrapped in high-grip Vittoria Terreno tyres. Suited to touring across mixed terrains and is perfect for epic journeys and relaxing weekend adventures, this bike is versatile and dependable for wherever your imagination takes you. Ideal for Bikepacking, Touring and Adventure Cycling The Bogan ST is designed in collaboration with riders from the bikepacking community. Featuring a unique Tange champion frame with a flattened top tube for extra comfort. This bike is built to fit 29x2.1"" tyres, a road drivetrain and Rondo's Direct 38T crankset for stability, durability and serious exploration on rough roads. Allowing you to go the distance with 29” wheels, forward geometry, handlebars shaped for comfort with soft bar tape, a short stem and a huge clearance, inspired by the needs of world travellers. Water bottle mounts are placed inside the frame for maximum volume with attachment points on the fork, top tube, down tube and rear triangle to fit any rack on the market. This is the ideal companion for an epic adventure. SRAM Apex 1x11-Speed Groupset with Disc Brakes This exceptional journey companion features a Custom Formed Tange Champion frame that’s immensely strong and lightweight while providing enough flex to absorb vibrations from the terrain. Upfront it has Rondo’s TwinTip adjustable geometry fork, so you can easily fine-tune the bike’s geometry to suit your riding style and journey requirements. With a SRAM Apex 1x11-Speed gearset, a wide-ranging 11-42T cassette and PRO 5.0 FM cable-actuated hydraulic disc brakes - this bike provides gears to climb steep hills with superb all-weather braking performance, so you can ride anywhere with confidence. PRO 5.0 FM caliper brakes are powerful, mechanically actuated hydraulic brakes with full CNC construction. The hydraulic system is fully sealed and maintenance free and the pistons use extra durable, cold weather resistant seals for extended durability in all weather conditions. Due to tight tolerances and durable sealing, the return action of pistons may seem slow at first, but this effect disappears after a period of break-in. This does not affect the performance or braking power in any way. Rondo Superlight Wheels and Vittoria Terreno Tyres Rolling upon Rondo Superlight wheels wrapped in Vittoria Terreno tyres, this bike travels fast, remains stable over rough terrain and ensures you have grip over loose and slippy surfaces. Finally, a complete finishing kit from Rondo gives this Rondo Bogan ST 2 Touring Bike stylish looks, reliable performance and outstanding rider comfort for travelling anywhere. TwinTip Fork Technology for Easy-Adjust Geometry In a world-first design for drop bar bikes, the Ruut CF2 features Rondo’s TwinTip forks, which enable the rider to change the geometry to suit the terrain/riding type. This is thanks to their adjustable dropouts, which can be set in the “HI” setting for steeper angles for a low and aggressive road bike feel, or the “LO” setting for a slightly longer wheelbase and slacker angles, making it ideal for endurance or off-road adventure riding. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
This wheelset is ideal for riders who want to lighten the load on their road bike or those who are seeking to gain speed through an aerodynamic advantage. It features two wide, tubeless-ready rims that match perfectly with higher volume tyres. This allows you to benefit from an increased grip, comfort as well as a lower rolling resistance as you clock up the miles. Reynolds has also equipped this model with fast-rolling TR3 hubs, which deliver a smooth rolling experience on every road. One final highlight is this version's refined rim shape that's optimised for crosswind stability, so that you can maintain your momentum in the toughest of riding conditions. - Wide, tubeless ready rim provides better fit for higher volume tyres that increase grip, lower rolling resistance and provide greater comfort - Refined, wider rim shapes have been optimised for crosswind stability at a variety of yaw angles - Features Sapim Sprint spokes and durable brass nipples - Equipped with fast rolling and smooth Reynolds TR3 hubs Item Top Features Continued: Engagement: 10 degrees Pawl: 4 Included: Front & Rear QR Skewers; 2x75mm Tubeless Valve Stems; Cryo-Blue Power Pads; 22mm Tubeless Tape installed; Reynolds Owner's Manual Weight: 1700g
This road bike wheelset features a tubeless-ready carbon rim profile, which makes it suitable for adding bigger modern tyres for increased stability, comfort and as well as a reduced weight. Reynolds has also kitted out this version with rim brake compatibility, so you can enjoy the benefits of its Ctg2 brake track that is 30% more resistant to heat than previous models. - Wide, tubeless ready rim provides better fit for higher volume tyres that increase grip, lower rolling resistance and provide greater comfort - Refined, wider rim shapes have been optimized for crosswind stability at a variety of yaw angles - Features Sapim CX-Sprint bladed spokes with lightweight alloy nipples - Premium graphics offer ultra clean and subtle appearance - Equipped with fast rolling and smooth reynolds allroads hubs - Ctg2 brake track is 30% more resistant to heat than previous models Item Top Features Continued: Pawl: 4 Type: Shimano Brake Type: Rim Brake Wheelset Size: 700c Tubeless Compatible: Yes Weight: 1635g
This women's optimises bike enables you to get the best out of your training, racing or riding sessions. It's why Cube made the Axial WS Race. Designed for both comfort and speed, the legendary reliability and performance of Shimano's 105 components let your riding shine. Slick, wide-ranging 2x11 gears tackle any route with ease, and powerful hydraulic disc brakes give you the confidence to push your limits, whatever the weather. Ride fast, ride free. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
The Energie EVO C features a full-carbon frameset with revised geometry for exceptional agility and control while offering a sublime combination of durability and style at a low weight. Plus, Vitus has fitted this bike with a SRAM Apex 1x11-Speed groupset that includes a 40-tooth chainset, an 11-36T cassette and Apex hydraulic disc brakes - this gives you a wide gear range for climbing steep hills, all-terrain pedalling efficiency and all-weather braking control. This versatile bike is ready for cyclocross racing across wet and slippy terrain and is your dependable journey companion for daily commuting and weekend off-road adventures. Durable, Functional and Stylish Carbon Cyclocross Race Bike At its core, the Vitus Energie EVO C Apex Cyclocross Bike has the clean lines and sleek aesthetic of a modern carbon race bike. But its best side is not the one leaning pristine against an immaculate garage wall or sparkling for Instagram. It’s the one ready for the real world - to race laps of a grassy park in the rain, slide into muddy corners, power through sand and compete in the worst winter weather. This bike cares not for your ability or ambition. Just want to finish? That’s cool, but if you also want to get amongst it this has the cutting-edge design to mix it with any competition. The buzz of race day, the nerves, the friendly competition with clubmates, the thrill of the experience, the personal bests, the feel of a great bike and wanting to do it all again next week. That’s what the Energie EVO is about. Ideal for Racing, Group Rides and All-Weather Commuting Whether racing for the podium or just for fun, the frame is loaded with thoughtfully engineered features that are uniquely designed and refined for the demands of cyclocross. A flatter top tube sits comfortably on your shoulder when carrying and a single-entry cable routing system reduces penetration of dirt so that performance is not affected by wet conditions or a jet wash. A revised carbon lay-up improves the stiffness for powering out of the turns, where it really matters mid-race, while also reducing weight for when you need to carry or charge into a climb. Stable, Agile and Responsive All-Terrain Performance The top tube is slightly longer and the stem a little shorter than before, keeping weight distribution slightly back from the front end, so the handling feels snappy and responsive - this is immediate control, whatever the conditions. Frame clearance around the wheels is generous, so your speed won’t be slowed, nor the bike be weighed down by mud. This clearance also makes the bike easy to clean, when the racing is done you can spray the bike down quickly and put it straight into the car. A Vitus is always best being ridden, not hanging on a wall, waiting or posing. So, when you’re not lining up for cyclocross, thanks to an innovative removable seat stay bridge, you can add mudguards and carry on with your winter training and year-round commuting. However hard the ride, with the Vitus Energie EVO C Cyclocross Bike (Apex), the fun is always turned right up. One-piece Monocoque Frame Expertly crafted with no joins, the uniquely layered continuous UD carbon frame is strong and light. And those modern, clean lines look awesome too! Performance Design (previously Race-Fit Geometry) The geometry of top-tier Vitus frames has been carefully calculated to ensure that comfort, aerodynamics and power are balanced, so the ride feel is enhanced for the best performance, and enjoyment, in all conditions. Class-leading Mud Clearance Mud is slow. To combat that we’ve made the clearance between tyre and frame as wide as possible (within UCI-regulations, of course) so the bike won’t get weighed down and your drivetrain won’t clog in those wet and sticky races. Mudguard Mounts The addition of an innovative removable mudguard mount between the seatstays gives you the option to keep using this bike beyond cyclocross racing, be that commuting, winter training or exploring remote lanes. Key Features: The Vitus top-tier Performance Design geometry considers aerodynamics, comfort and power as a whole system UCI-approved and podium-ready. A game-changer. SRAM Apex 1x11 drivetrain - 40T chainring / 11-36t cassette Powerful hydraulic disc brakes - SRAM Apex HRD One-piece UD Carbon monocoque frame is strong and light Dropped seat stays enable compliance over harsh ground FSA Omega handlebars Alex CXD22 tubeless wheels and Maxxis All Terrane tubeless-ready 700x33c tyres Removable front derailleur mount and a Vitus 1X chainguide Vitus Race Performance Saddle, with titanium rails and pressure-relief channel Weight: 8.7kg (size medium) Features: Frame: Energie EVO Carbon, SL UD Carbon, UCI Approved, Internal Cable Routing, Removeable Seat-Stay Bridge, Removeable Front Derailleur Mount, Integrated Seat Clamp, Integrated Mudguard Mounts, 12mm x 142mm axle Fork: Energie EVO Carbon, SL UD Carbon, Tapered Steerer, 100 x 12mm, Integrated Mudguard Mounts. Headset: ACROS Aix 322 R3, Sealed Bearings, OD48, 1 1/8” – 1 ½”, 41.8 / 28.6 – 52 / 4 Handlebar: FSA Omega, XS:400mm S:400mm M:420mm L:420mm XL:440mm Stem: FSA Omega, 3D Forged, bar bore 31.8mm, +/- 6 degrees, XS:80mm S:80mm M:90mm L:90mm XL:100mm Grip (Tape): Vitus SuperGrip, Anti Slip Wheelset: Front Rim: Alex CXD22, 700c, 32 Hole, Tubeless Ready Rear Rim: Alex CXD22, 700c, 32 Hole, Tubeless Ready Front Hub: Novatec D791SB, 2 x Sealed Bearings, 32 Hole, 12 x 100mm Thru Axle, 6-Bolt Rear Hub: Novatec D791SB, 4 x Sealed Bearings, 32 Hole, 12 x 142mm Thru Axle, 6-Bolt Front Tyre: Maxxis All Terrane, 700c x 33mm, Tubeless Ready Rear Tyre: Maxxis All Terrane, 700c x 33mm, Tubeless Ready Spoke: 14G/15G Stainless Steel, Double Butted, Brass Nipples Chain: KMC X11, 11 Speed Crankset: SRAM Apex 1, X-SYNC 40T, XS:170mm S:170mm M:172.5mm L:172.5mm XL:175mm Bottom Bracket: TRiPEAK 386-24, BB 386EVO for 24mm axle Front Brake Set: SRAM Apex HRD, Hydraulic Disc, SRAM G2 Clean Sweep Rotors F:160mm Rear Brake Set: SRAM Apex HRD, Hydraulic Disc, SRAM G2 Clean Sweep Rotors R:140mm Rotors: SRAM G2 Clean Sweep, Front:160mm, Rear:140mm Rear Derailleur: SRAM Apex 1, Long Cage Right Shifter: SRAM Apex 1 HRD, 11 Speed Cassette: Sunrace CS-RX1, 11-36T Saddle: Vitus Race Performance, CRN-Ti Rail, Pressure Relief Channel Seat Post: FSA Gossamer, 27.2mm Seat Screw: Energie evo Integrated, Internal Wedge System Chain Guide: Vitus CX 1X Guide, Front Derailleur Mounting Weight: 8.7 kg (Medium) Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.
Well-equipped for fast and intense trail riding, this full suspension mountain bike (MTB) frame features a high-quality aluminium build that's specifically developed for the most demanding of rides. Nukeproof has put this model through a hydroforming and triple-butting process to ensure maximum strength and durability as you carve your way around the mountain. In addition, it is kitted out with a RockShox Super Deluxe Coil Ultimate DH RC rear shock that provides smooth and consistent rear end suspension performance as you charge from trail to trail. Another highlight is its comfortable geometry that includes internal cable routing for a clean, sleek finish. “It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all-new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Trail-Ready Full Suspension Alloy MTB Frame The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof's engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, the brand created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of four main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: S/M/L/XL Fork Travel: 200mm Axle to Crown: 581mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 275 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage Four-position adjustable linkage progression chip system Three-position adjustable chainstay length Weight: 5.03kgs/11lbs
“It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. This full-suspension mountain bike (MTB) frame comes equipped with a robust 6061 aluminium construction that's been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you hit your favourite trails. Specifically developed for riders who want to complete their mullet bike setup, this model also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another benefit is its 157x12mm rear hub Boost axle spacing, which gives you stiff and responsive handling, wherever your next ride takes you. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Lightweight Full Suspension MTB Frame with 200mm Travel The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: M/L/XL Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 297 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage 4 position adjustable linkage progression chip system 3 Position adjustable chainstay length Weight: 5.06kgs/11.1lbs
Reynolds AR 58 Carbon Road Bike WheelsetIdeal for road racing enthusiasts who want a competitive advantage, the AR 58 carbon fibre road bike wheels give you an aerodynamic advantage you can feel on the road and see on the clock. The 28mm wide (19mm internal) rims are tubeless ready for additional weight savings and ready for larger volume modern tyres. This means you’ll also enjoy better grip and comfort, low rolling resistance and better puncture protection. Stable and Fast-Rolling Carbon Fibre Road WheelsReynolds has also equipped this model with fast-rolling TR3 hubs, which deliver a smooth rolling experience on every road. One final highlight is this version's refined rim shape, that's optimised for increased crosswind stability. This helps you to maintain your momentum in the toughest riding conditions.Features: Rim Material: Strike Carbon Tubeless Rim Brake 6600 Rim Type: Clincher Use: RoadInner Rim Width: 19mmOuter Rim Width: 28mmRim Depth: 58mmSpoke Count: Front: 20, Rear: 24Spoke Pattern: Front: Radial; Rear: 2xSpoke Type: SprintNipple Material: External BrassHub: Front: GW RRB; Rear: GW RRBFreehub Engagement: 10 degreesFreehub Pawls: 4Cassette Compatibility: Shimano 9,10 and 11-speed road cassettesBrake Compatibility: Rim brakeTyre Compatibility: Clincher and tubeless clincher tyresAxle Size: Front: Quick Release (QR) x100mm; Rear: QRx135mmWheelset Size: 700c Tubeless Compatible: Yes Included: Front & Rear QR Skewers; 2x75mm Tubeless Valve Stems; Cryo-Blue Power Pads; 22mm Tubeless Tape installed; Reynolds Owner's ManualWeight: 1700gBuy Reynolds Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Reynolds Arx 58 Carbon WheelsetThis wheelset is specifically designed for assisting you as you clock up the miles on your road bike by delivering fast and smooth rolling performance. It features a tubeless-ready carbon rim profile, which is perfect for adding bigger modern tyres for increased stability, comfort and as well as a reduced weight. Reynolds has also equipped this model with rim brake compatibility, so you can benefit from its Ctg2 brake track that is 30% more resistant to heat than previous models.- Wide, tubeless ready rim provides better fit for higher volume tyres that increase grip, lower rolling resistance and provide greater comfort.- Refined, wider rim shapes have been optimized for crosswind stability at a variety of yaw angles.- Features Sapim CX-Sprint bladed spokes with lightweight alloy nipples.- Premium graphics offer ultra clean and subtle appearance.- Equipped with fast rolling and smooth reynolds allroads hubs.- Ctg2 brake track is 30% more resistant to heat than previous models.Features: Rim Material: Strike Carbon Tubeless Rim BrakeUse: RoadInner Rim Width: 19mmOuter Rim Width: 28mmRim Depth: 58mmSpokes: F20, R24Spoke Pattern: Front: Radial; Rear: 2xSpoke Type: CX-SprintNipple Material: External AlloyHub: Front: Reynolds Hub / Rim Brake Only; Rear: Reynolds Hub / Rim Brake OnlyEngagement: 10 degreesPawl: 4Type: ShimanoWheelset Size: 700c Tubeless Compatible: YesWeight: 1635gBuy Reynolds Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fast Forward Drift DT240 Carbon Gravel Disc WheelsetProviding durable, agile and lightweight performance, this high-quality wheelset is Fast Forward's first-ever dedicated model for gravel bike riding. It features a full carbon rim construction, which gives it exceptional stiffness and versatility without adding any unnecessary grams to your ride. Fast Forward has also equipped it with Centrelock disc brake compatibility, so riders can enjoy powerful and consistent braking operation wherever their ride takes them. Another highlight is its tubeless-ready technology, which means that you'll benefit from lower rolling resistance, increased comfort and stability, as well as fewer chances of flats or punctures.Adventure-Ready Carbon Gravel WheelsetWhile weight is normally one of the most interesting specifications to check, Fast Forward takes a different approach when it comes to producing top-quality wheels. In the brand's choices, weight is important but should not compromise other areas such as durability and agility. For the Drift, it was even more important as they need to last and cope with whatever comes on your gravel paths. You will find this in the DT Swiss Aerocomp spokes and brass nipples for example which - when put together with the updated DT240 EXP hubs - make a fantastic set. The thicker spokes also offer more rigidity and durability and can take some hits.Agility is brought together by the rim's height of 36mm combined with the Aerocomp spokes. These ingredients bring you stiffness and more power transmission when you put the wheels in motion. All your energy will result in more and easy miles off-road and thus more time to enjoy your ride!Hookless Design for TubelessThis wheelset's hookless rim design features an internal width of 24mm only to be used with tubeless tyres. A special carbon layup is chosen to deal with higher impacts when riding on low tyre pressure on more heavy gravel roads. It offers the possibility for a broad range of tyre options from 30mm up to 60mm and with that no excuse for the terrain you will attack.The set puts merely 1515 grams on the scale and comes as a complete package with tubeless tape and valves packed nicely in a protective FFWD wheel bag. Drift is the first dedicated gravel wheelset that marks the start of this category for Fast Forward.Features: Material: Full Carbon Clincher Use: Gravel, Adventure Axle: Front: 12x100mm; Rear: 12x142mm Type: Clincher with Hookless design Rim Depth: 36mm External Rim Width: 30mm Internal Rim Width: 24mm ETRTO: 24-622 Brake Type: Centrelock Disc brake Max Tyre Pressure: 72 psi Min/Max Tyre Size: 30mm/60mm Tubeless Ready: Yes Disc Brake Compatible: Yes Rim Brake Compatible: No Inner Tube Compatible: Yes Tubeless Compatible: Yes Tubular Compatible: No Hub Type: DT Swiss 240 EXP (2:1) Bearings: Cartridge; Stainless Steel Spoke Type: DT Aerocomp Spoke Style: Straight-pull Spoke Count: Front: 24; Rear: 24 Nipples: DT Pro Lock Brass 15mm Rim Tape: Tubeless tape; 27mm Single or Pair: Pair Included: Wheelset, pre-installed tubeless tape, pair of alloy tubeless valves, tubeless instructions and a high quality padded wheel bag Max Rider Weight Limit: 120kg/265lbs Weight: 1515g (Front: 710g; Rear: 805g)Manufacturer's Part Numbers: ASDRIFT36FCC240S Black 700c Shimano 9/10/11sp ASDRIFT36FC240XD Black 700c SRAM XDRBuy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kona Wo Hardtail BikeThe Wo Hardtail Bike from Kona is a durable and stylish fat bike that's ideal for off-road trail riding, long-distance touring and bike packing adventures. It has a butted aluminium frame and a Shimano Deore 1x11-Speed groupset with an 11-51t cassette and hydraulic disc brakes. It also rolls upon Sun Ringle Mulefut 80 Tubeless Ready rims wrapped in huge-volume 4.8" Schwalbe Jumbo Jim all-terrain tyres.Shimano Deore 11-Speed Groupset with Hydraulic Disc BrakesThe Wo has been a staple in Kona's fat bike line-up for a few years now. Its simple, dependable design has made it a favourite for fat bike aficionados everywhere. Running a wide range 11-speed drivetrain, durable cranks, and big 4.8” tyres on tubeless-ready rims, the Wo gets you where you need to go with ease.Features: Frame Material: Kona Fat 6061 Aluminium Butted Sizes: S, M, L, XL Rear Shock: n/a Fork: Kona Wo Fat Disc Crankarms: Race Face Ride Fat Chainrings: 28t Wide/Narrow B/b: Race Face 100mm Pedals: n/a Chain: KMC X11 Freewheel: Shimano Deore 11-51t 11-Speed Chainguide: n/a F/d: n/a R/d: Shimano Deore 11-Speed Shifters: Shimano Deore 11-Speed Brake Calipers: Shimano MT201 Hydraulic Front Brake Rotor: Shimano RT30 180mm (centrelock) Rear Brake Rotor: Shimano RT30 160mm (centrelock) Brake Levers: Shimano MT201 Hydraulic Headset: Feimin FP-H863 Handlebar: Kona XC/BC 35 Stem: Kona XC/BC 35 Seatpost: Kona XC/BC 31.6mm Seat Clamp: Kona QR Grips: Kona Key Grip Saddle: Kona Fat Front Hub: KT 150x15mm Rear Hub: KT 197x12mm Spokes: Stainless Black 14g Rims: Sun Ringle Mulefut 80 Tubeless Ready Front Tyre: Schwalbe Jumbo Jim TR 26x4.8" Rear Tyre: Schwalbe Jumbo Jim TR 26x4.8"Easy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Kona Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kona Wo Hardtail BikeThe Wo Hardtail Bike from Kona is a durable and stylish fat bike that's ideal for off-road trail riding, long-distance touring and bike packing adventures. It has a butted aluminium frame and a Shimano Deore 1x11-Speed groupset with an 11-51t cassette and hydraulic disc brakes. It also rolls upon Sun Ringle Mulefut 80 Tubeless Ready rims wrapped in huge-volume 4.8" Schwalbe Jumbo Jim all-terrain tyres.Shimano Deore 11-Speed Groupset with Hydraulic Disc BrakesThe Wo has been a staple in Kona's fat bike line-up for a few years now. Its simple, dependable design has made it a favourite for fat bike aficionados everywhere. Running a wide range 11-speed drivetrain, durable cranks, and big 4.8” tyres on tubeless-ready rims, the Wo gets you where you need to go with ease.Features: Frame Material: Kona Fat 6061 Aluminium Butted Sizes: S, M, L, XL Rear Shock: n/a Fork: Kona Wo Fat Disc Crankarms: Race Face Ride Fat Chainrings: 28t Wide/Narrow B/b: Race Face 100mm Pedals: n/a Chain: KMC X11 Freewheel: Shimano Deore 11-51t 11-Speed Chainguide: n/a F/d: n/a R/d: Shimano Deore 11-Speed Shifters: Shimano Deore 11-Speed Brake Calipers: Shimano MT201 Hydraulic Front Brake Rotor: Shimano RT30 180mm (centrelock) Rear Brake Rotor: Shimano RT30 160mm (centrelock) Brake Levers: Shimano MT201 Hydraulic Headset: Feimin FP-H863 Handlebar: Kona XC/BC 35 Stem: Kona XC/BC 35 Seatpost: Kona XC/BC 31.6mm Seat Clamp: Kona QR Grips: Kona Key Grip Saddle: Kona Fat Front Hub: KT 150x15mm Rear Hub: KT 197x12mm Spokes: Stainless Black 14g Rims: Sun Ringle Mulefut 80 Tubeless Ready Front Tyre: Schwalbe Jumbo Jim TR 26x4.8" Rear Tyre: Schwalbe Jumbo Jim TR 26x4.8"Easy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Kona Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Kona Wo Hardtail BikeThe Wo Hardtail Bike from Kona is a durable and stylish fat bike that's ideal for off-road trail riding, long-distance touring and bike packing adventures. It has a butted aluminium frame and a Shimano Deore 1x11-Speed groupset with an 11-51t cassette and hydraulic disc brakes. It also rolls upon Sun Ringle Mulefut 80 Tubeless Ready rims wrapped in huge-volume 4.8" Schwalbe Jumbo Jim all-terrain tyres.Shimano Deore 11-Speed Groupset with Hydraulic Disc BrakesThe Wo has been a staple in Kona's fat bike line-up for a few years now. Its simple, dependable design has made it a favourite for fat bike aficionados everywhere. Running a wide range 11-speed drivetrain, durable cranks, and big 4.8” tyres on tubeless-ready rims, the Wo gets you where you need to go with ease.Features: Frame Material: Kona Fat 6061 Aluminium Butted Sizes: S, M, L, XL Rear Shock: n/a Fork: Kona Wo Fat Disc Crankarms: Race Face Ride Fat Chainrings: 28t Wide/Narrow B/b: Race Face 100mm Pedals: n/a Chain: KMC X11 Freewheel: Shimano Deore 11-51t 11-Speed Chainguide: n/a F/d: n/a R/d: Shimano Deore 11-Speed Shifters: Shimano Deore 11-Speed Brake Calipers: Shimano MT201 Hydraulic Front Brake Rotor: Shimano RT30 180mm (centrelock) Rear Brake Rotor: Shimano RT30 160mm (centrelock) Brake Levers: Shimano MT201 Hydraulic Headset: Feimin FP-H863 Handlebar: Kona XC/BC 35 Stem: Kona XC/BC 35 Seatpost: Kona XC/BC 31.6mm Seat Clamp: Kona QR Grips: Kona Key Grip Saddle: Kona Fat Front Hub: KT 150x15mm Rear Hub: KT 197x12mm Spokes: Stainless Black 14g Rims: Sun Ringle Mulefut 80 Tubeless Ready Front Tyre: Schwalbe Jumbo Jim TR 26x4.8" Rear Tyre: Schwalbe Jumbo Jim TR 26x4.8"Easy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Kona Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.