The Mucky Nutz Face Fender is the original and Patent Pending fork mounted mudguard. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zipties for a more permanent solution.
The Mucky Nutz Face Fender is the original and Patent Pending fork mounted mudguard. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zipties for a more permanent solution.
The Mucky Nutz Face Fender is the original and Patent Pending fork mounted mudguard. Like most folk the guys at Mucky Nutz don't like using large, ugly mudguards, so decided to look at other options. After many failures and even uglier mudguards the penny dropped and they came up with the Face Fender. Weighing from just 11g without fasteners it's the lightest and most versatile mudguard available.Made from sheet thermoplastic, the profile of the mudguard is shaped so that when it's installed on the fork via the hook and loop fasteners, it catches mud, spray and whatever else you might pick up...! The hook and loop fasteners act as a simple and quick way to install and detach the mudguard. If you intend to leave it on all year round like many riders do, then you can also use zipties for a more permanent solution.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
Don't be fooled by the title, Enduro have been producing bearings since before the word "Enduro" became fashionable, there bearings are an industry leading design and they set the standard for all other bearing manufacturers to match. You may be more familiar with the ABEC standards from the worlds of skateboarding and roller blades but Enduro have tailored their bearings for the specific demands of cycling. The entry level industry standard of a bearing is ABEC 1 but Enduro do not produce any bearing which comes in at less than ABEC 3, this means that even if you choose an entry level Enduro bearing it is of better quality than another manufacturer's entry level bearing.These standard ABEC 3/5 bearings are designed for use within bottom brackets or hubs and give outstanding performance and longevity to your components.
Key Features:5-pack of Dynaplug soft nose brass tip repair plugs with a shorter tail for use in the road Air system,Essential for the correct use of the Road air system, the longer tails of standard plugs will block the CO2 vents on the short Road Air system nozzle and prevent proper operation,Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!,The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape,No need to remove the tyre, no messy glues or solvents, just plug and ride!,If a single plug is not enough to seal a hole, just fold the -ætail-Æ flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugs,A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location,Made with pride in the USA using patented technology.
This new version of the Butt Fender is designed for us on Fat Bikes and stops you getting that cold, damp and chaffed feeling downstairs! It joins the already established Bender Fender range, using the same technology and materials, to give you all the same benefits but this time provide rear protection! It attaches to the saddle rails, needing no additional fasteners and extends over the back wheel, protecting the rider against 'soggy arse syndrome'. So if you're prone to this problem and are looking for a lightweight, minimalist solution, look no further!
This P-handled hex wrench will fit your hand as well as the task it's designed forThe high strength nylon handle has an ergonomic shape to give maximum grip and comfortThe long shaft is fitted with a genuineBondhus balldriver for those hard to reach bolt headsThe short end of the wrench is conveniently mounted into the handle for any high torque applicationsBondhus Protanium high torque industrial steel is used for long life
This saddle rail bracket is designed to be used with the BOOST-R rear light; this product will fit any standard rail design saddle.Product Compatibility: BOOST-R DB, Boost-R ReAKT
The perfect addition to your Safe-it protective sleeve in sizes S to XXL. The attachment set allows you to quickly attach your mobile devices and maps in their cozy waterproof sleeves to any Ultimate handlebar bag (except for the Ultimate Compact). The set consists of four hooks and adjustable elastic cords. A smart solution ready for any weather and terrain!
iXS Kid's Carve GlovesThe Kid's Carve Gloves from iXS give junior mountain bikers the confident grip and comfort they need to keep pushing the limits of their MTB skills.Made with a pre-formed ergonomic shape, the Kid's Carve MTB Gloves provide a natural grip of the bars. A slim but abrasion-resistant palm gives great terrain feedback and offers protection should they take a fall. The slip-on design reduces bulk while the reinforced fingertips give a healthy boost to durability and lifespan. With touchscreen compatibility, there's also no need to remove the gloves when using a smartphone.Features:Pre-formed ergonomicsSlip-on designStretchAbrasion-resistant synthetic palmReinforced fingertipsCapacitive touch functionBuy iXS Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
QR Seatpost Bracket for the Blaze Rear Light. Fastens to seat post using silicon band, will generally fit any size seatpost.
QR Seat post mount bracket for TraceR light only. Fastens using a silicon band, allows fitment to almost all seat posts sizes.
Bracket and Rubber Strap. Available for Flash or Flare.The QR Mount for the Trace is a one size fits all quick release mount. The silicone band securely attaches the bracket to the handlebar for safe secure fitment..
This saddle rail bracket is designed to be used with the Exposure Lights Flare and will fit any standard rail design saddle
For all Water-Bag Water-Sack and Water-Belt models from 1999Spare valve DETAILS: + 1 smart valve
For 11 and 16.5-liter Seat-Packs. You can use these support straps to give your Seat-Pack additional security and fixation on the bike. The straps additionally support the bag and prevent the bag from sinking when the load is distributed unfavourably. CONTENT: 1x support strap More Information COLOR orange MATERIAL nylon BAG TYPE single ADAPTER - INSTRUCTIONS Download DATASHEET Download WEIGHT 24 g | 0.8 oz HEIGHT 108 cm | 42 inch PROPERTIES mig nopvc
An essential for any runner to stay hydrated, the Ultimate Direction Flexform II 500 Bottle has been made with a BPA-free Polyurethane and features a 500ml volume with handy millilitre markers at the back.
An easy to mount design for Exposure Trace lights, this Exposure Lights mount quickly attaches to regular round seatposts with ease and securely holds your Exposure Blaze light in place. Not compatible with some aero seatposts. Includes bracket and rubber band.
The pre-formed ergonomics of the Kid's Carve Gloves ensure a natural grip of the bars and paired with the abrasion-resistant synthetic palm keeps young riders confidently in control of their bike. The slip-on design reduces bulk while the reinforced fingertips give a healthy boost to durability and lifespan. With touchscreen compatibility, there's no need to remove the gloves when using a smartphone.