The Wolf Tooth ReMote Dropper Lever is ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Compatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,ReMote for Magura is compatible with the 2-bolt clamp SRAM brakes that do not feature Matchmaker X clamps.,ReMote for Hope is only compatible with Tech 3 brakes..Mounting Types:ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware,ReMote IS-II for Shimano I-Spec II - includes IS-II hardware ,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - includes Hope hardware,ReMote IS-EV for Shimano I-Spec EV - includes IS-EV hardware.
The Wolf Tooth Remote Clamp Conversion Kit allows you to attach a Wolf Tooth Dropper Lever to a specific handlebar diameter or brake lever.By attaching the dropper level to a brake calliper this gives the advantage of minimising components on the handlebars, creating a more compact set up. This also means the the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly.Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, and SRAM Matchmaker X.The Magura Brake conversion kit is for Magura brakes but is compatible with some 2-bolt SRAM brakes as well. The Hope conversion kit is also compatible with Tech3 Hope brakes. Key Features: Conversion kit to fit Wolf Tooth Remote Action Dropper Lever or Remote Light ,Action Dropper Lever to different brake levers and handlebar diameters,22.2mm clamp for flat mtb bars and 31.8mm for drop road bars,Conversion kit for: Hope brakes, Magura brakes, Shimano IS-AB, Shimano IS-EV, Shimano IS-II, SRAM Matchmaker X,Delrin and aluminium parts.
Wolf Tooth Remote Replacement Lever, Black.
The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel.Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation Instructions Compatibility: Compatible with all cable actuated dropper posts., Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.,. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware.,ReMote IS-II for Shimano I-Spec II - Includes IS-II hardware.,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem.,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - Includes Hope hardware (see compatibility above),ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware.
The Wolf Tooth ReMote Sustain Dropper Lever for RockShox Reverb dropper posts simplifies the actuation system, accelerating return speeds, improving tactile feedback and reducing level throw, all for better ride quality.In removing the secondary hydraulic system in favour of a simple cable and mechanical actuator, Wolf Tooth make your RockShox Reverb dropper post more efficient whilst giving you all the benefits of the widely-lauded ReMote Dropper Lever.The mechanism can be easily installed in 15 minutes, is readily detachable for servicing and offers a leak-proof, robust, low-maintenance mechanical actuation system for your RockShox Reverb post.Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Sustain Installation InstructionsCompatibility:Compatible with Rockshox Reverb A2 and B Spec Stealth (internal) routing dropper posts.,NOT compatible with A1 spec Reverbs,NOT compatible with non-Stealth (externally routed hydraulic hose),A2 Spec has no marking at the top of the stanchion and the speed adjuster knob is black (vs Silver for the A1),B Spec has gold "Rockshox" written at the top of the stanchion.Mounting Types:ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware,ReMote IS-II for Shimano I-Spec II - includes IS-II hardware ,ReMote MM SRAM/Avid MatchMaker X - Includes the MatchMakerX hardware, which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp, which we do not sell but can easily be purchased.,ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,ReMote 31.8 is available for road bikes where the ReMote is mounted next to the stem,ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware,ReMote Hope for Tech3 Hope Brakes - includes Hope hardware,ReMote IS-EV for Shimano I-Spec EV - includes IS-EV hardware.
These limited edition Wolf Tooth ReMote Dropper Levers in anodised colours are ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation InstructionsCompatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best..Mounting Types:ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
The B-RAD Everywhere Base is a all-rounds mount that allows riders to add a bottle cage where there is not a mount on the frame. The Everywhere Base can function as a B-RAD base, offsetting existing bottle cage bosses by up to 22mm to make room for frame bags, piggyback shocks, or other accessories. The B-RAD Everywhere Base 2 is ideal for standard water bottle cages and the B-RAD Everywhere Base 3 is ideal for cargo cages that use three bolts.Bases are the foundation for the B-RAD System which allows you to mount accessories. Compatible with most bike frames and seat posts.Key Features:Silicone-backed hook-and-loop straps keep base securely in place,Lightweight, durable, rustproof aircraft-grade aluminium with ED-coated hardware,Hardware includes bolts with T25 Torx head, two silicone-backed straps, and foam pads with adhesive backing.,Length: Everywhere Base 2 (10cm), Everywhere Base 3 (14 cm),Strap Length: 30cm (12") can be trimmed to length as needed,6061-T6 aluminium brackets | EVA foam pads.
Wolf Tooth Remote Light Action Replacement Lever, Black.
Key Features:Compatible with all cable-actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, wolf tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the light action will work best. If it is less than 52mm, the standard remote will work best.Mounting types:,Remote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max..
The Wolf Tooth Remote BarCentric dropper lever is a compact, slender dropper lever ideal for already crowded handlebars. The design easily fits between the left grip and levers. There are four potential lever positions so it doesn’t interfere with front shifters, lockout levers, or e-bike controls. The dropper lever is a ring shape that encompasses any mountain bike handlebar. A large smooth bearing encircles the handlebar making for easy use and action. Key Features: Slender dropper lever to fit on already crowded handlebars,Compatible with all cable actuated dropper posts,Works with dropper posts that have the barrel end of the cable either at the remote or post,Works with any mountain bike handlebar,Adjustable reach,6061-T6 aluminium,Weight 41g.