Park Tool I-Beam Multi-Tool IB-2Park ToolI-Beam Multi-Tool IB-2Strong, compact, and lightweight, the IB-2 is a great tool for taking on the road or trail. The IB-2 features Park Tool’s unique I-Beam handle with 10 tools.Features:2, 2.5, 3, 4, 5, 6 and 8mm forged hex wrenches, T25 Torx® compatible star-shaped driver, and a straight blade screwdriver IB-12 is nominally, 75mm long, 40mm wide, 18mm thick Weight: 108gBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Chainring Nut Wrench (CNW-2)Install and remove chainrings with ease thanks to the Chainring Nut Wrench from Park Tool. Benefiting from a double-ended design to fit most slotted-type nuts, its design prevents spinning when tightening. The ideal tool for your cycle workshop. Features:The outer width of both ends of the CNW-2 are nominally 12mm wideOne end has a two outer tips nominally 2.7mm wide each, and the other end has tips of 3.8mm eachCompatibility: Double-ended to fit most slotted-type nutsBlade Thickness: 1.35mmNote: The CNW-2 replaces the CNW-1Weight: 19.6gBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Head Tube Reaming/Facing Set (HTR-HS)This tool is ideal for customising the actual setup that you require for your bike maintenance. This tool can be modified to face headsets and bottom brackets, press in bearings and headset cups or simply to ream a section of the frame which needs a little more clearance.Build your own specific tool by adding cutters, reamers and facers to this base tool unit. This kit includes the handle, shaft and the quick release centre cone & nut. Over 20 different reamers and facers are compatible with this central assembly, for numerous headset and bottom bracket standards.Note that no reamers, facers or pilots are included with this set.Features:Park Tool part #: HTR-HSUniversally customisable tool for many usesCreate your own tool rather than having many different variants of the same designBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Tool (BBT-29)If you’re a busy shop or home mechanic that’s regularly working on bike drivetrains, the BBT-29 Bottom Bracket Tool is an ideal addition to your kit. Easy to use and bringing you plenty of leverage, Park Tool has given it two 16-notch cut-outs. One of the sizes suits cups with a 39mm outer diameter such as Shimano types and one has a 48.5mm size to suit FSA MegaEvo models.Features: Removes bottom brackets with 16-notch bearing cups Suitable for 39mm bottom bracket cups such as Shimano Dura-Ace 9000 series and XTR 980 series Suitable for 48.5mm (e.g. FSA MegaEvo).Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Derailleur Hanger Alignment Gauge DAG2.2An essential tool for your workshop, this Derailleur Hanger Alignment Gauge from Park Tool makes quick work of the task at hand. Constructed from heavy-gauge, chrome-plated steel, this is a hard-wearing tool that is suitable for wheel sizes from 20" to 29" inch and works with all bicycles that feature a derailleur. Features:Gauge Bar Material: Heavy gauge, chrome-plated steelCompatibility: Compatible with virtually all derailleur-equipped bicycles including Shimano® Direct Mount hangersLength: 16 inches (41cm)Adjusts to fit 20" to 29"+ wheelsReplaceable threaded tipUpgraded large inner shaft for added strength*Tighter tolerances for improved accuracy*Improved clearance and reach to fit more frame/hanger combos including low clearance thru-axle derailleur hangers**Compared to DAG-2Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Preset Torque Driver (PTD-5)This shop quality pre-set torque driver limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The PTD-5 features all metal internal construction with a comfortable, ergonomic composite moulded grip. Each tool is assembled and calibrated at The Park Tool factory in Minnesota. Features: Pre-set to 5 Nm ¼ inch hex drive Includes 3, 4, 5mm and T25 bits stored in the handle Limits torque applied to fasteners while rotating clockwise All metal internal construction for long lifeBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Preset Torque Driver PTD-6This shop quality pre-set torque driver limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The PTD-6 features all metal internal construction with a comfortable, ergonomic composite moulded grip. Each tool is assembled and calibrated at The Park Tool factory in Minnesota. Features: Pre-set to 6 Nm ¼ inch hex drive Includes 3, 4, 5mm and T25 bits stored in the handle Limits torque applied to fasteners while rotating clockwise All metal internal construction for long lifeBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Saw Guide For Carbon Composite Fork SG-8Carefully machined by Park Tool to work with the thicker saw blades that are required for cutting carbon components, the SG-8 Saw Guide helps you to obtain a precise cut every time. Compatible with 1”, 1 1/8” and 1 1/4” steerer tubes and other round tubes from 22-32mm, it’s an essential addition to the home or professional bike mechanic’s toolbox. Simply clamp the SG-8 onto the tube and cut, letting the SG-8 guide the hacksaw blade. The SG-8’s non-scratching composite body incorporates steel threads and a steel reinforcing plate to withstand the rigours of heavy shop use. The SG-8 accommodates blades up to 2.5mm (3/32") wide.Features: Saw guide for wider, carbon-specific saw blades Works on 1" (25.4mm), 1-1/8" (28.6mm) and 1-1.4" (31.8mm) threadless fork steerer tubes Accommodates blades up to 2.5mm (3/32") wideBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Triple Spoke Wrench (SW-7.2)With its round, smooth shape that fits comfortably in the hand, the SW-7.2 spoke nipple key is ideal for home mechanics or to carry with you on long distance touring rides. Park Tool has precision machined and Nickel plated it for extra durability and it’s compatible with three of the most commonly used sizes. Features: Fits .127" (3.23mm), .130" (3.30mm) & .136" (3.45mm) nipples Lightweight and portable Nickel platedBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Tyre Lever Set (TL-4.2)An essential tool for every cyclist, this Tyre Lever Set from Park Tool makes removing tyres a breeze. Designed for tubless and tight beaded tyres, this set features an ergonomic design, with a flat tip to grip under your tyres, it also includes a spoke hook and comes in a set of 2. Features:Wide flat tip for easy entryErgonomic shapeSpoke hookSold in packs of 2Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Steel Core Tyre Levers (TL-6.2)With steel inner cores to prevent flex and steel tips to better engage the tyre’s bead, the TL-6.2 bike tyre levers will help you to quickly remove even the stiffest tyres. Supplied as a pair, their updated super-smooth covering prevents scratches to expensive rims. Plus, at 12.7cm (5”) in length, they’re ideal for carrying with you on the road of trails or for daily use in your busy workshop.Features: Length: 12.7cm (5") Ergonomic shape Steel core for strength Pack of twoBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.