The Urban is designed for daily/frequent use and has the following features: Polyester Ripstop, PU coated, Seams taped, Toggle adjustable, Elasticated wheel fit, Eyelet, Stuff Sac, Velcro lock-through panel. The cover can be tweaked to suit any seat and handle bar height. The URBAN design also features unique Velcro lock-through panels, so your lock can be pushed through to secure the cover to your bike. This also keeps the cover down low rather than riding above the lock. BikeParkas also come in a handy and tough 'Stuff Sac' that fits into a day pack, and the URBAN Stuff Sac also easily attaches to your bike frame. The Stuff Sac measures just 20cm x 12cm (8" x 3" ) and is ultra lightweight, weighing just 14 ounces (400 grams). You can even stuff them away when wet, they won’t damage. One size fits all - the BikeParka measures: L 205 cm (80") x H 125 cm (50") and will fit handlbars up to 60cm (23"). Fitting your BikeParka Each BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handle bars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handle bars and make sure that the logo is by the fr ont wheel for the snuggest fit. The Stuff Sac Take a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try an d be tidy! Care over time Each BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild deter gent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.
Allows the installation of FSA Ø24mm axle MegaExo cranksets as wells as Shimano HollowTech II cranksets into BB30 & PF30 bottom braket shells (BB30 or PF30 BB required),Aluminium convered in plastic,For alloy NBD (No Bolt Design) chainsets,Weight: 83g.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
BikeParka Urban Bike CoverKeep your bike clean, dry and protected from all weathers with the Urban Bike Cover. Ideal for cyclists always on the move, this bike cover is light and packable to fit into the portable stuff sac which can easily be attached to your bike frame. With the unique Velcro lock through slot panels, your lock can be pushed through to secure the cover with your bike. This cover is extremely versatile fitting a range of bikes with different heights, handlebars and frames. Its elasticated bottom fits around the front wheel with a toggle to adjust the size to fit snug around your bike. Fitting your BikeParkaEach BikeParka adjusts to sit slightly differently on each bike to allow for different sized frames, handlebars and seat heights. To fit your BikeParka to your bicycle, start by putting the cover under the front wheel then pull it back over your bike. When it's over your bike, adjust the toggle on top to take up extra slack left or right. Take care to fit around handlebars and make sure that the logo is by the front wheel for the snuggest fit.The Stuff SacTake a corner and literally start stuffing the BikeParka in the bag. If you try to fold it first it will end up with air pockets. No need to try and be tidy!Care over timeEach BikeParka has the highest UV protection to keep the colour bright but you can extend its life by keeping it in the shade whenever possible. To clean your BikeParka, treat it the same as a good quality tent - sponge clean with warm water and a natural soap/ mild detergent, and don't machine wash. It's made from tough fabric so shouldn't rip, but accidents can happen and if needed your BikeParka can easily be fixed with a tent repair kit.Features:Material: Polyester Ripstop with PU CoatingFully Seam SealedAdjustable ToggleEyelets for A LockLock Through PanelDimensions: Size 20cm x 12 cmOne Size Fits AllLength: 220cmHeight: 140cmCompatibility: Fits Handlebars up to 65cmWeight: 0.4kgBuy BikeParka Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed to offer the best protection against the rain.Key Features:WaterFlex material, outer polyurethane (PU) rubber with inner,MicroFleece. Water-resistant, flexible and durable,38mm wide Velcro strap allows you to use these shoe covers for (inline) skates,All seams are covered inside with waterproof tape,Two reinforced parts between sole and zipper as well as on the nose,Industrial strength YKK zipper,50% polyester, 50% polyurethane.
Made from a highly water-resistant and windproof stretch fabric, the High Cuff Waterproof Aero Road Overshoes keep out the elements so you can get training miles ticked off. Seams are taped to the outside to prevent water seepage while the tall cuff adds extra protection from soaking spray from the front wheel while adding welcome warmth and insulation right up to your calf. If you're racing then the sleek aero-fit also provides a performance boost, keeping airflow smooth. The PU-coated Lycra is also fleece-lined, keeping cosiness levels high and preventing the irritation against the skin often found with purely Latex-based covers. Reflective details to the back complete the overshoe, enhancing your visibility when daylight fades. If you’re a rider that heads out in all weather, then these are the shoe covers for you. They are lightweight, comfortable, aerodynamic, and highly protective – your shield in the battle against the elements. Important Information: Please follow the instructions carefully when fitting these shoe covers over your cycling shoes. They have been specifically designed to be worn with road shoe cleat systems. Wearing them with MTB-like shoes can damage the shoe cover beyond repair.
Brake lever assembly HS22 black, for left/right hand use, 3-finger lever Brake lever assembly HS22 for left or right hand use,3-finger lever,Material: Carbotecture®,Colour: black.Delivery includes one brake lever assembly for HS22 rim brake.
GripGrab High Cuff Waterproof Aero Road OvershoesThe GripGrab High Cuff Waterproof Aero Road Overshoes bring together wet weather protection and slippery aerodynamics. Pull them on when you know there's cold and wet weather in the forecast but you'll still be out and riding fast.To keep water and wind out and add extra warmth, the GripGrab High Cuff Waterproof Aero Road Overshoes make use of a fleece-backed highly water-resistant and windproof stretch fabric. Seams are taped to prevent water creeping inside and the tall, calf-length design prevents road-spray from causing discomfort. The tight, aero fit also makes them ideally suited for use in races.Thanks to the fleece lining, these overshoes are super-comfortable - not something that can always be said of latex style racing overshoes. Reflective details on the heel also boost your visibility when training in low-light conditions. If you’re a rider that heads out in all weather, then these are the shoe covers for you. They are lightweight, comfortable, aerodynamic, and highly protective – your shield in the battle against the elements.Important Information:Please follow the instructions carefully when fitting these shoe covers over your cycling shoes. They have been specifically designed to be worn with road shoe cleat systems. Wearing them with MTB-like shoes can damage the shoe cover beyond repair.Features:Materials: 100% PolyesterPU-coated LycraWindproof and highly water-resistantTaped seamsFleece-linedNo-zip aero-fitReflective heel detailsBuy GripGrab Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
GripGrab High Cuff Waterproof Aero Road OvershoesThe GripGrab High Cuff Waterproof Aero Road Overshoes bring together wet weather protection and slippery aerodynamics. Pull them on when you know there's cold and wet weather in the forecast but you'll still be out and riding fast.To keep water and wind out and add extra warmth, the GripGrab High Cuff Waterproof Aero Road Overshoes make use of a fleece-backed highly water-resistant and windproof stretch fabric. Seams are taped to prevent water creeping inside and the tall, calf-length design prevents road-spray from causing discomfort. The tight, aero fit also makes them ideally suited for use in races.Thanks to the fleece lining, these overshoes are super-comfortable - not something that can always be said of latex style racing overshoes. Reflective details on the heel also boost your visibility when training in low-light conditions. If you’re a rider that heads out in all weather, then these are the shoe covers for you. They are lightweight, comfortable, aerodynamic, and highly protective – your shield in the battle against the elements.Important Information:Please follow the instructions carefully when fitting these shoe covers over your cycling shoes. They have been specifically designed to be worn with road shoe cleat systems. Wearing them with MTB-like shoes can damage the shoe cover beyond repair.Features:Materials: 100% PolyesterPU-coated LycraWindproof and highly water-resistantTaped seamsFleece-linedNo-zip aero-fitReflective heel detailsBuy GripGrab Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
GripGrab High Cuff Waterproof Aero Road OvershoesThe GripGrab High Cuff Waterproof Aero Road Overshoes bring together wet weather protection and slippery aerodynamics. Pull them on when you know there's cold and wet weather in the forecast but you'll still be out and riding fast.To keep water and wind out and add extra warmth, the GripGrab High Cuff Waterproof Aero Road Overshoes make use of a fleece-backed highly water-resistant and windproof stretch fabric. Seams are taped to prevent water creeping inside and the tall, calf-length design prevents road-spray from causing discomfort. The tight, aero fit also makes them ideally suited for use in races.Thanks to the fleece lining, these overshoes are super-comfortable - not something that can always be said of latex style racing overshoes. Reflective details on the heel also boost your visibility when training in low-light conditions. If you’re a rider that heads out in all weather, then these are the shoe covers for you. They are lightweight, comfortable, aerodynamic, and highly protective – your shield in the battle against the elements.Important Information:Please follow the instructions carefully when fitting these shoe covers over your cycling shoes. They have been specifically designed to be worn with road shoe cleat systems. Wearing them with MTB-like shoes can damage the shoe cover beyond repair.Features:Materials: 100% PolyesterPU-coated LycraWindproof and highly water-resistantTaped seamsFleece-linedNo-zip aero-fitReflective heel detailsBuy GripGrab Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.