With a torque range from 10 up to 60 Nm, this Effetto Giustaforza II 10Nm-60Nm Pro tool is standard equipment of the best cycling workshops. Design is inspired by smaller Giustaforza, constructive quality and reliability are state-of-the art. This bike wrench is supplied with a 3/8-1/2 adapter included (as suggested by Greg Kopecky/Slowtwitch.com in his review).10 up to 60 Nm RangeQuality and reliabilityState-of-the art Torque wrench3/8-1/2 adapter includedCapacity from 10 up to 60 Nm: This torque range is ideal for the elements of the bicycle with the highest torque specifications (bottom bracket, cassettes). In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use: Unlock the wrench-end knob by gently pulling it and set the desired torque value rotating the knob and reading the torque on the scale. After setting the torque value, push the knob back in place, to prevent unwanted changes to the set value while using the wrench. Depending on the rotation direction of the part you want to tighten, push the square section bar through the wrench head to one side or the other. When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 10-60 has been conceived and produced in Italy. The tool has laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics, increase its reliability. Each sample is checked and numbered as a single masterpiece.Calibration service: The +-4% tolerance is guaranteed for 5000 cycles (5000 clicks ), then the wrench should be re-calibrated. Calibration is a service Effetto offer in their laboratories at the cost of 35 plus shipping expenses. After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will be returned to the customer with a calibration certificate.
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec, and Silver level forks give you stiff steel upper tubes and TurnKey lockout.Key Features:New graphics package with E-MTB endorsement option (15x110mm),TurnKey lockout gives 'on/off' control,Fits Tires up to 2.8" (15x110mm),Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look,Plush coil spring or highly tunable Solo Air spring.Specifications:Model designator (SF): TK,Wheel size: 27.5",Travel (mm): 100mm, 120mm,Damper Type: TurnKey,Fork offset: 42mm (27.5"),Maxle included: n/a,Color (FS): Gloss Black,E-MTB Decal: No,Steerer: 1-1/8" Aluminum,Axle: 9mm Quick Release,Axle to Crown (mm): 490, 510,Brake type (FD): Disc,Crown Material: Forged, pocketed aluminum,Upper crown type: n/a,Lower leg material: Magnesium,Upper Tube Finish: Fast Black,Upper tube type: 30mm straight wall steel,Damper adjust: Remote (included),Damping adjustments: Extl rebnd, TurnKey lockout,Volume reducer: n/a,Spring: Solo Air,Spring rate: n/a,Max Tire Diameter (mm): 710,Max Tire Width (mm): 62,Maximum Rotor Size: 185mm,Minimum Rotor Size: 160mm,Fender Compatibility: n/a,Crown OD (mm): 48,Part Weight (g): 2560.
Please note: These forks have a straight 1 1/8" steerer tube and 9mm QR dropouts. Images are for illustration only. Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec, and Silver level forks give you stiff steel upper tubes and TurnKey lockout.Key Features:New graphics package with E-MTB endorsement option (15x110mm),TurnKey lockout gives 'on/off' control,Fits Tires up to 2.8" (15x110mm),Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look,Plush coil spring or highly tunable Solo Air spring,.Specifications:Model designator (SF): TK,Wheel size: 29",Travel (mm): 100mm,Damper Type: TurnKey,Fork offset: 51mm (29"),Maxle included: n/a,Color (FS): Gloss Black,E-MTB Decal: No,Steerer: 1-1/8" Aluminum,Axle: 9mm Quick Release,Axle to Crown (mm): 509,Brake type (FD): Disc,Crown Material: Forged, pocketed aluminum,Upper crown type: n/a,Lower leg material: Magnesium,Upper Tube Finish: Fast Black,Upper tube type: 30mm straight wall steel,Damper adjust: Crown,Damping adjustments: Extl rebnd, TurnKey lockout,Volume reducer: n/a,Spring: Solo Air,Spring rate: n/a,Max Tire Diameter (mm): 755,Max Tire Width (mm): 62,Maximum Rotor Size: 185mm,Minimum Rotor Size: 160mm,Fender Compatibility: n/a,Crown OD (mm): 42,Part Weight (g): 2670.
Please note: These forks have a straight 1 1/8" steerer tube and 9mm QR dropouts. Images are for illustration only. Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec, and Silver level forks give you stiff steel upper tubes and TurnKey lockout.Key Features:New graphics package with E-MTB endorsement option (15x110mm),TurnKey lockout gives 'on/off' control,Fits Tires up to 2.8" (15x110mm),Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look,Plush coil spring or highly tunable Solo Air spring,Please note, this fork has a straight 1 1/8" steerer tube and 9mm QR dropouts not tapered and bolt through as pictured.,.Specifications:Model designator (SF): TK,Wheel size: 27.5",Travel (mm): 100mm, 120mm,Damper Type: TurnKey,Fork offset: 42mm (27.5"),Maxle included: n/a,Color (FS): Gloss Black,E-MTB Decal: No,Steerer: 1-1/8" Aluminum,Axle: 9mm Quick Release,Axle to Crown (mm): 490, 510,Brake type (FD): Disc,Crown Material: Forged, pocketed aluminum,Upper crown type: n/a,Lower leg material: Magnesium,Upper Tube Finish: Fast Black,Upper tube type: 30mm straight wall steel,Damper adjust: Crown,Damping adjustments: Extl rebnd, TurnKey lockout,Volume reducer: n/a,Spring: Solo Air,Spring rate: n/a,Max Tire Diameter (mm): 710,Max Tire Width (mm): 62,Maximum Rotor Size: 85mm,Minimum Rotor Size: 160mm,Fender Compatibility: n/a,Crown OD (mm): 48,Part Weight (g): 2545.
Mavic Cosmic Elite UST Road WheelsetComing equipped with a simple to use UST Road Tubeless system, this road bike wheelset rolls smoother and faster with a reduced risk of punctures. Its 30mm deep aero aluminium rim construction also allows it to deliver added speed and efficiency for sprints and solo riding. Specifically designed for use with rim brakes, this model benefits from Mavic's UB Control brake track technology that uses its CNC-machined surface to improve braking friction and eliminate shuddering when braking.Tubeless-Ready Road Bike WheelsetBy removing the tube, Mavic also removed friction from this model, so there's less rolling resistance, which means it requires less energy to reach higher speeds. Its UST system, including the sealant that makes the tyres more resistant to punctures, is also 40g lighter than a traditional tube and tyre system. The alloy rim also benefits from the brand's unrivalled experience in creating light, yet strong rim profiles. Mavic does this by carefully adjusting the thickness of the rim wall to achieve the perfect balance between stiffness, strength and weight.Wind Tunnel TestedMavic's extensive wind tunnel testing led its team to create a 30mm deep rim that optimises aero performance, while also improving this wheelset's stability in crosswinds. Ensuring that pedalling power is always efficient, this version comes complete with an FTS-L freewheel system that's lightweight, flexible and easy to maintain.Features: Rim Material: S6000 Aluminium Hub Material: Front and Rear Bodies: Aluminium; Axle: Steel Spoke Material: Steel Use: Road, Triathlon Internal Rim Width: 17mm Rim Height: 30mm ETRTO: 622x17TC ROAD Tubeless Ready: Yes, UST tubeless technology Tyre Compatibility: UST Tubeless and Tube type Brake Type: Rim brake only, UB Control Recommended Tyre Sizes: 25 to 32mm Front Axle: Quick Release only Rear Axle: Quick Release only Freewheel: Shimano, FTS-L Steel Hub Technologies: QRM Auto bearing preload technology, FTS-L freewheel technology and Sealed cartridge bearings (QRM) Spoke Count: Front and Rear: 20 Spoke Lacing: Front and Rear (Non-Drive Side): Radial; Rear Drive Side: Crossed 2 Spoke Shape: Straight pull, flat Spoke Nipples: Steel, ABS ASTM Category 2: Road and Off-road with jumps less than 15cm Max Rider Weight: 120kg (bike included) Weight: Pair: 1770g (Front: 815g; Rear: 955g)Mavic Lifetime Warranty and Updated Crash Replacement ProgramWarranty InformationStarting with Model Year 2021 products, Mavic offer a lifetime guarantee for selected wheelsets. This guarantee applies only to the original owner when they have been registered within 2 months of their purchase.Mavic's aluminium wheels (this version) and all its other products are covered by the 2-year legal guarantee. This warranty is extendable to 3 years for aluminium wheels, helmets and Comete Ultimate shoes when the product has been registered within 2 months of its purchase.These warranties cover material and manufacturing defects that would appear during normal use of the product with the exception of ""wear"" parts. All the information on how to register comes inside the box.Crash Replacement ProgramMavic recognise that accidents can occur and are aware of what your investment in your bicycle equipment means as well as the frustration of breaking your equipment during a fall. If your product has been registered within 2 months of purchase, Mavic offer to replace it with an identical or equivalent product according to the following tariff schedule:- 50% off the public price recommended by Mavic for wheels with less than 2 years of use.- 40% off the public price recommended by Mavic for wheels with between 2 and 5 years of use.- 30% of the public price recommended by Mavic for wheels with between 6 and 10 years of use.Manufacturer's Part Number:LP1637100 Black 700c ShimanoBuy Mavic Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
WTB i35 Custom MTB WheelThis i35 Custom mountain bike (MTB) wheel features superb components and a high-quality build to tackle wherever your next trail-riding adventure takes you. It comes kitted out with a Tubeless Ready WTB KOM Tough i35 TCS Rim, a Hope Pro 4 MTB Hub and stainless steel, plain gauge spokes. As a result, you'll benefit from its smooth and dependable rolling performance as you carve your way around the mountain. This wheel is ideal for enduro, all mountain and gravity/downhill riding.WTB KOM Tough i35 TCS RimThis rim features a super-durable alloy construction to ensure it can take everything the mountain throws at it, and it's also lightweight to ensure exceptional climbing efficiency. The durability is further enhanced by the I-Beam construction, while the dual support beams increase the stiffness for consistent, reliable handling. Plus, the 4D angled-spoke drilling disperses tension evenly to allow for a fast-rolling performance. Rim Features: Rim Material: Aluminium Rim Type: Clincher Tyre Compatibility: Standard clincher and tubeless clincher Tubeless Compatible: Yes Usage: Trail, Enduro, Gravity Width: 35mm (inner) Brake Compatibility: Disc brake only ERD: 27.5": 568mm; 29": 604mm 4D angled spoke drilling eliminates binding and lateral loading, dispersing tension more evenly over a greater area Recessed channel along rim centre has enabled installation of WTB's Solid Strip Solid Strip prevents tubeless tape sagging at the spoke holes for a smooth, consistent tyre/rim interface Weight: 602g (27.5"), 630g (29")Rim Technologies: UST Tubeless Ready: The UST concept improves traction, control and comfort while reducing inertia and flats. TCS 2.0 Technology: This refined version of the “Tubeless Compatible System” offers the same high-performance, lightweight mountain bike rim structure, but is now easier to install and more dependable.Hope Pro 4 MTB HubFrom their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All bearings are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree. The Hope Pro 4 hub builds upon the brand's Pro 2 EVO hub and offers superb attention to detail and excellent rolling performance thanks to the high-quality Schaeffler bearings throughout. Hub Features: Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) Conversions available for QR, 10mm bolt in, 10mm, 12mm and 142x12mm thru-axles Boost hub flanges move outboard 3mm compared to standard Pro 4 rear hub to increase complete wheel stiffness, only compatible with boost forks and frames. Freehub Options: Aluminium Shimano/SRAM 10-11 speed or SRAM XD cassette options Axle Compatibility: Multiple options available Weight: QR:311g; 142mm: 300gPlease Note: there are multiple front and rear hub options and rim sizes available for these wheels via the selection menu at the top of this page. Buy WTB Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Custom i35 MTB Boost Rear WheelHand Built in the UK, the Hope Custom i35 MTB Boost Rear Wheel features superb components and a high-quality build to tackle wherever your next trail-riding adventure takes you. It comes kitted out with a Tubeless Ready WTB KOM Tough i35 TCS Rim, a Hope Pro 4 MTB Hub and stainless steel, plain gauge spokes. As a result, you'll benefit from its smooth and dependable rolling performance as you carve your way around the mountain. This wheel is ideal for enduro, all mountain and gravity/downhill riding.WTB KOM Tough i35 TCS RimThis rim features a super-durable alloy construction to ensure it can take everything the mountain throws at it, and it's also lightweight to ensure exceptional climbing efficiency. The durability is further enhanced by the I-Beam construction, while the dual support beams increase the stiffness for consistent, reliable handling. Plus, the 4D angled-spoke drilling disperses tension evenly to allow for a fast-rolling performance.Rim Features: Rim Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Rim Type: Clincher Tyre Compatibility: Standard clincher and tubeless clincher Tubeless Compatible: Yes Usage: Trail, Enduro, Gravity Width: 35mm (inner) Brake Compatibility: Disc brake only ERD: 27.5": 568mm; 29": 604mm Hub: Hope Pro 4 Boost MTB Rear Hub - Freehub: SRAM XD driver Bearing Type: Sealed Stainless Steel cartridge bearings Hand-built in the UK WTB KOM Tough i35 Rim paired with Hope Pro 4 Hub to creates a high-performance, unique and durable DH/Enduro MTB wheel 35mm internal rim width, meaning these wheels can be mounted with 2.3" to 2.6" MTB Tyres 4D angled spoke drilling eliminates binding and lateral loading, dispersing tension more evenly over a greater area Recessed channel along rim centre has enabled installation of WTB's Solid Strip Solid Strip prevents tubeless tape sagging at the spoke holes for a smooth, consistent tyre/rim interface Weight: 602g (27.5"), 630g (29")Rim Technologies: UST Tubeless Ready: The UST concept improves traction, control and comfort while reducing inertia and flats. TCS 2.0 Technology: This refined version of the “Tubeless Compatible System” offers the same high-performance, lightweight mountain bike rim structure, but is now easier to install and more dependable.Hope Pro 4 MTB Boost Rear HubFrom their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All bearings are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree.The Hope Pro 4 hub builds upon the brand's Pro 2 EVO hub and offers superb attention to detail and excellent rolling performance thanks to the high-quality Schaeffler bearings throughout.Hub Features: Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) Available in 148 x 12mm thru axle Conversions available for 141 x QR (sold separately) Freehubs available to suit 10/11spd Shimano, 12 Speed MicroSpline or Hope cassette (sold separately) Specifically designed for 148 x 12mm frames with hub flanges moved outboard 3mm compared to standard Pro 4 rear hubs that increases the complete wheel stiffness Freehub: SRAM XD driver Weight: 311gPlease Note: there are multiple front and rear hub options and rim sizes available for these wheels via the selection menu at the top of this page.Buy WTB Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
For over 20 years, Thudbuster has been the industry standard in suspension seatposts by providing unequaled comfort and reliability to riders around the world. The Thudbuster G4 is superior to its predecessor in every way. Building on Thudbuster’s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, additional suspension travel, a singlebolt seat clamp design as well as ease of use through tool-free elastomer change.By improving on this already legendary design, we’re confident to say that the Thudbuster G4 is the most advanced suspension seatpost ever made.Key Features:Travel: 50mm (1.97"),Seatclamp: Single bolt fastening and angle adjustment design,Elastomer: 2-piece design, tool-free inner elastomer change for various rider weight,Pivots: Threaded, serviceable, hard anodized aluminum axles flanged PTFE bushings,Rider Weight Limit: 150kg/330lb,Sizes: 27.2mm, 30.9mm, 31.6mm (additional diameters available with shim),Length: Minimum 100mm, Maximum 274mm,Weight: 580g (31.6mm) .
For over 20 years, Thudbuster has been the industry standard in suspension seatposts by providing unequaled comfort and reliability to riders around the world. We are now proud to announce the latest evolution to that legacy with the Thudbuster Generation 4 (G4).The new Thudbuster LT is superior to its predecessor in every way. Building on Thudbuster’s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we’re confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. Key Features: Travel: 90mm (3.54"),Seatclamp: Single bolt fastening and angle adjustment design,Elastomer: 2-piece design, tool-free inner elastomer change for various rider weight,Pivots: Threaded, serviceable, hard anodized aluminum axles flanged PTFE bushings,Rider Weight Limit: 115kg/250lb,Sizes: 27.2mm, 30.9mm, 31.6mm (additional diameters available with shim),Length: 420mm (30.9 & 31.6), 390mm (27.2),Extension: Minimum - 146mm, Maximum - 320mm (30.9 & 31.6) / 290mm (27.2),Weight: 750g (31.6mm) .
Hand built right here at Sourcebmx. One of the highest spec custom wheels we offer this wheel uses the Profile tried and tested Elite hub laced into the super strong Cinema 888 rim. This wheel is laced together using high quality straight gauge stainless spokes. ###section### Product Specs WHEEL SIZE: 20" HUB: Profile Elite AXLE: 10mm Female RIM: Cinema 888 SPOKES: Straight Gauge NIPPLES: Brass WEIGHT: 1010g / 2.22lbs
The Bike Gator! The new generation of Unior 1693A(1693AS) bike stand. The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts. It is easy to assemble and the support tubes are fold together enabling easier transportation between work place. Maximum load capacity is 30kg Suitable for tubes with diameter of min. Ø24 mm and max. Ø32 mm. Weight of the stand without tool tray is 5.7kg Replaceable rubber jaw covers, item 1693.11 Advantages: The stand features a new array of precision aluminum and steel parts which offer stiffness and durability. NEW Jaw mount and rotation system. improved sliding system NEW stylish metal tool tray with interchangeable SOS foam insert.
Targeted at professional users, the Effetto Giustaforza II 2Nm-16Nm Pro is red anodized and has a reversible ratcheting head. The Deluxe Pro version is completed with cycling-specific bits and comes into a practical wrap package.This Deluxe Pro version is equipped with a bicycle-specific bit set:Bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard length (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)3x100mm (HEX4, HEX5, T25)1x100mm (extension)Capacity from 2 up to 16 Nm: This is the best torque range for precision bicycle applications and sensitive components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.Easy to use: Set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other) insert the appropriate bit (depending on the bolt you need to tighten). When using the tool, a loud CLICK and a 3° free movement tells when the torque has been reached. Always take the wrench to minimum torque value after use.Ratcheting head: For a higher productivity in professional applications, Giustaforza II Pro gets a very small yet highly reliable ratcheting head. 1/4 square (1/4 square/hex adapter provided, to be able to use standard bits).Lightweight: The light aluminium body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool, built to last: Functional, linear in design and precise in any detail: shouldn t be a surprise to know that Giustaforza II 2-16 Pro has been designed and produced in Italy. The tool is hard-anodized with laser-etched inscriptions and is built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics further increase its reliability. Each sample is checked and numbered as a single masterpiece.