See the compatability chart in the images for specific brake caliper and lever fitment. The kit includes 8 nipple adaptors. Each nipple adaptor is specific to the brake caliper and lever and so please refer to the chart to check the required fitment. Compatatiblity has been checked and confirmed with the following brakes: Avid Code/ XO SRAM Guide Series/ Level Shimano Formula R1, C1,TheOne Hope X2/ E4 & V4 Magura MT Series (2,4,5,6,7,8)/ Louise Hayes El Camino/ Stroker Ryde/ Sole At the moment the kit is not compatible with TRP Quadium, TRP Slate, Formula Cura and Hayes Dominion A2/ A4. Please note: For the newer models of SRAM brakes with a Bleeding Edge port you will also require the LifeLine SRAM Bleeding Edge Brake Bleed Adaptor
As these plugs are super tacky, you do not need to use any additional glue to hold them in place, they will seal up very quickly and have you riding again in no time.
Use this product instead of your wheel skewer to securely connect your rear wheel into Tacx trainers. You can rely on this Tacx quick release skewer to do the job efficiently. Additional Features: Total Length: 150mm Part Number: T1402 Suits Rear hubs with 130mm and 135mm widths
Featuring an adapted head which allows the tyre insert to sit on top of the valve, the shape of the head allows for easy inflation and deflation. Each valve has a removable core allowing you to get maximum air flow from your tubeless pump or CO2 cartridge. The specially-designed custom cap features a core remover built in so you can remove & tighten the core without any additional tools. The nut has also been designed so that you can get a good grip on the flat edges to tighten the valve in the rim. An O-ring is also provided which sits against the outside of the rim and provides an airtight seal while preventing damage to the rim from the nut on the valve. How to Install Remove valve cap and nut, insert valve through rim, fit O-ring to valve then thread nut on and tighten by hand.
The Universal Head Cup Remover will also remove the PressFit 30 (PF30) bottom bracket units. The PressFit 30 inside diameter is the same as headset cups, and are pressed in the same manner.
Excellent quality replacement parts designed to fit BH59 hydraulic brake hose. We updated the packs in 2021. The remaining stock of the 12 piece packs have 4 olives, 4 inserts and 4 8mm nuts. The 10 piece packs include 4 olives, 4 inserts and 1 8mm nut and 1 5mm nut.
This is a replacement SRAM Universal Derailleur Hanger (UDH) made by Nukeproof. This hanger is fully compatible for any frame which uses a SRAM UDH hanger including the 2021 Nukeproof Mega & Giga bikes. The UDH is designed to rotate rearward in the event of an impact and features the ability to “re-rail” the chain back onto the small cog The UDH works with all brands of drivetrain, not just SRAM. Please note: If your frame does not currently have a UDH hanger fitted, this will not be compatible
The Gloworm Helmet Mount Base Plate is designed for use with the Gloworm Universal Helmet Mount and Gloworm QR Helmet Mount
This versatile bike cover is specifically designed to help protect your bike from damage while stored at home, in the back of the van or during uplifting. Nukeproof recognises that many riders have all suffered annoying damage when storing their bikes side by side, or when your riding buddies throw their bikes in a van or uplift beside yours. As a result, this universal bike cover was developed to offer reliable protection for road bikes as well as mountain bikes of all disciplines including 26/27.5/29" frames. Versatile Bike Cover with Foam Padding Produced from a durable PU protected 600D polyester, this cover is hard-wearing to ensure that your bike is protected. The cover is foam padded on the inside to cushion your bike when stored side by side and to absorb knocks. Another highlight is its four Velcro adjustable straps and its buckle that's located underneath, which also make sure the cover is a snug and secure fit around your bike. This cover will also help keep your vehicle clean post-ride if there are no local bike washing facilities. Easy Clean Interior Whether you're into road cycling or mountain bike (MTB) trail riding, this cover comes complete with a wipe-clean surface on the inside. This makes it easy to clean off any dirt or oil, while also providing water resistance.
This 12 piece kit contains four copper olives, four inserts/barbs and four steel nuts. The inserts/barbs are designed to fit 2.5mm inner diameter hose for Tektro brakes. The olives are designed to fit 5.5mm outer diameter hose and the nuts are M8 x 0.75mm for 5.5mm outer diameter hose. Manufacturer's Part Number: LL-TUOIN Gold 12 Piece
Easy to install, this remote clamps around your handlebar to allow you to effortlessly control your Fox Suspension Transfer dropper seatpost. Offering improved ergonomics, this model makes operating your seatpost easier as you weave your way from trail to trail. Another benefit is its 34% lighter than the previous version, so you won't have to worry about weighing down your handlebar with unnecessary excess grams. Ideal for riders who already own the Fox Suspension Transfer dropper seatpost and want straightforward actuation on every trail adventure. The Gold Standard The Transfer seatpost is lighter and tighter than ever before. Less weight, reduced length and decreased insertion depth means a better fit on more frames. Improved durability and easier serviceability means more riding and less downtime. Available with up to 200mm of drop, Transfer is ready to tackle the nastiest terrain. Manufacturer's Part Number: 925-06-005 Black 2x/3x
Excellent quality replacement parts designed to fit BH90 hydraulic brake hose.