Built Tough The Union BOA Clip-In MTB Shoes feature a one-piece welded seamless upper. This keeps weight to a minimum and at the same time gives the shoes a snug and comfortable fit. It also makes the shoes brilliantly rugged and durable. Just what you need when taking to mountain bike trails. Meanwhile, a moulded toe-cap deflects rock strikes and other debris kicked up off the trail, giving you the confidence to barrel through any trail feature at speed. Ultratac™ Grip With Ultratac™ rubber compound, the sole unit of the Union Shoes provides fantastic grip over all terrain. It's durable too, ensuring it can take the wear and tear of mountain biking. Inside the shoes, a stiffening plate provides extra pedalling efficiency while its moulded shape keeps comfort levels high. Dual BOA® Li2 Adjustment Fast and effortless adjustment is made possible via the twin BOA® Li2 dials. These lightweight adjusters allow you to get the fit dialled just to your liking, across the whole foot. Micro-adjustment allows you to increase or decrease the pressure by a quick twist of the dials either fore or aft. The low profile and impact-resistant dial design also make them durable, exactly what's needed for the demands of mountain biking. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
Built Tough The Union Flat MTB Shoes feature a one-piece welded seamless upper. This keeps weight to a minimum and at the same time gives the shoes a snug and comfortable fit. It also makes the shoes brilliantly rugged and durable. Just what you need when taking to mountain bike trails. Meanwhile, a moulded toe-cap deflects rock strikes and other debris kicked up off the trail, giving you the confidence to barrel through any trail feature at speed. Ultratac™ Grip With their proprietary Ultratac™ rubber compound and engineered tread pattern, the Union Flats provide tenacious control on flat pedals and fantastic grip over any terrain when off the bike. It's a durable sole unit too, ensuring it can take the wear and tear of mountain biking. Inside the shoes, a stiffening plate provides extra pedalling efficiency while its moulded shape keeps comfort levels high. Lace Closure Ultra reliable, lightweight and simple to adjust, the Union use laces to give you fit adjustment you can trust every ride. No fuss. No hassles. Works in all weathers. Easy to replace too. What's not to like?
Built Tough The Union Clip-In MTB Shoes feature a one-piece welded seamless upper. This keeps weight to a minimum and at the same time gives the shoes a snug and comfortable fit. It also makes the shoes brilliantly rugged and durable. Just what you need when taking to mountain bike trails. Meanwhile, a moulded toe-cap deflects rock strikes and other debris kicked up off the trail, giving you the confidence to barrel through any trail feature at speed. Ultratac™ Grip With Ultratac™ rubber compound, the sole unit of the Union Shoes provides fantastic grip over all terrain. It's durable too, ensuring it can take the wear and tear of mountain biking. Inside the shoes, a stiffening plate provides extra pedalling efficiency while its moulded shape keeps comfort levels high. Lace and Power Strap Ultra reliable, lightweight and simple to adjust, the Union use a lace and Power Strap system to give you fit adjustment. Once you have the laces done up as you like, the Power Strap gives an added level of security and keeps laces neatly in place. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union TC PedalsThese trail-ready mountain bike (MTB) pedals boast a dual-sided mechanism for easy pedal entry, secure cleat holding and positive, consistent release. All set for long days on your favourite mountain routes, Hope has also put these through its CNC machining process to shave off any unnecessary excess material, while still maintaining maximum strength. Another highlight is their cartridge bearings and maintenance-free IGUS bushing for smooth long-term durability.Large Platform Trail Clip PedalWhether you're shredding the trails with your riding buddies or exploring new routes on your own, these clip-in pedals are engineered for performance. Hope has equipped these with a large contact area for excellent stability, while their eight replaceable pins deliver increased grip as you charge through demanding terrain conditions. One final highlight is they come supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also -allow 2mm of lateral (side to side) float. With a design that's fully serviceable and rebuildable, these are a perfect choice of upgrade for conquering wherever your next trail adventure takes you.Features: Pedal Body Material: Fully CNC machined Axle Material: Chromoly (CrMo) Steel Clips and Cleats Material: Stainless Steel Use: Mountain Bike (MTB) Mechanism: Dual sided Shoe/Pedal Contact Area: Large Q-Factor: 55mm Bearings/Bushing: Cartridge bearings and an IGUS bushing Pins: Replaceable pins for increased grip (8 pins) Single or Pair: PairTechnologies: Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Fully serviceable and re-buildable. Axle is high strength Cr-Mo, heat treated and plated. Titanium axle upgrades available (sold separately). Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also -allow 2mm of lateral (side to side) float. Large platform with option of 4 pins per side.Manufacturer's Part Numbers: PDUTCB Blue PDUTCC Orange PDUTCN Black PDUTCPU Purple PDUTCR Red PDUTCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union TC PedalsThese trail-ready mountain bike (MTB) pedals boast a dual-sided mechanism for easy pedal entry, secure cleat holding and positive, consistent release. All set for long days on your favourite mountain routes, Hope has also put these through its CNC machining process to shave off any unnecessary excess material, while still maintaining maximum strength. Another highlight is their cartridge bearings and maintenance-free IGUS bushing for smooth long-term durability.Large Platform Trail Clip PedalWhether you're shredding the trails with your riding buddies or exploring new routes on your own, these clip-in pedals are engineered for performance. Hope has equipped these with a large contact area for excellent stability, while their eight replaceable pins deliver increased grip as you charge through demanding terrain conditions. One final highlight is they come supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also -allow 2mm of lateral (side to side) float. With a design that's fully serviceable and rebuildable, these are a perfect choice of upgrade for conquering wherever your next trail adventure takes you.Features: Pedal Body Material: Fully CNC machined Axle Material: Chromoly (CrMo) Steel Clips and Cleats Material: Stainless Steel Use: Mountain Bike (MTB) Mechanism: Dual sided Shoe/Pedal Contact Area: Large Q-Factor: 55mm Bearings/Bushing: Cartridge bearings and an IGUS bushing Pins: Replaceable pins for increased grip (8 pins) Single or Pair: PairTechnologies: Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Fully serviceable and re-buildable. Axle is high strength Cr-Mo, heat treated and plated. Titanium axle upgrades available (sold separately). Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also -allow 2mm of lateral (side to side) float. Large platform with option of 4 pins per side.Manufacturer's Part Numbers: PDUTCB Blue PDUTCC Orange PDUTCN Black PDUTCPU Purple PDUTCR Red PDUTCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union TC PedalsThese trail-ready mountain bike (MTB) pedals boast a dual-sided mechanism for easy pedal entry, secure cleat holding and positive, consistent release. All set for long days on your favourite mountain routes, Hope has also put these through its CNC machining process to shave off any unnecessary excess material, while still maintaining maximum strength. Another highlight is their cartridge bearings and maintenance-free IGUS bushing for smooth long-term durability.Large Platform Trail Clip PedalWhether you're shredding the trails with your riding buddies or exploring new routes on your own, these clip-in pedals are engineered for performance. Hope has equipped these with a large contact area for excellent stability, while their eight replaceable pins deliver increased grip as you charge through demanding terrain conditions. One final highlight is they come supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also -allow 2mm of lateral (side to side) float. With a design that's fully serviceable and rebuildable, these are a perfect choice of upgrade for conquering wherever your next trail adventure takes you.Features: Pedal Body Material: Fully CNC machined Axle Material: Chromoly (CrMo) Steel Clips and Cleats Material: Stainless Steel Use: Mountain Bike (MTB) Mechanism: Dual sided Shoe/Pedal Contact Area: Large Q-Factor: 55mm Bearings/Bushing: Cartridge bearings and an IGUS bushing Pins: Replaceable pins for increased grip (8 pins) Single or Pair: PairTechnologies: Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Fully serviceable and re-buildable. Axle is high strength Cr-Mo, heat treated and plated. Titanium axle upgrades available (sold separately). Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also -allow 2mm of lateral (side to side) float. Large platform with option of 4 pins per side.Manufacturer's Part Numbers: PDUTCB Blue PDUTCC Orange PDUTCN Black PDUTCPU Purple PDUTCR Red PDUTCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.