With over a years input from the Eclat team they came up with this tyre. An all round tyre suitable for the streets & park riding, Smooth central tread for higher straight line speed & Deeper tread on the shoulder for better cornering grip.
The Mirage Tyre might just be the most advanced tyre Eclat have ever designed. It's designed on the premise of a super lightweight tyre that's strong enough for the toughest street riders on the team. Using a high performance 120TPI casing and a specially designed dual compound tread that's smooth in the centre but with plenty of outer tread for traction and control through carving and cornering. The Mirage was built primarily with street riders in mind and employs a full bead-to-bead "Silkshield" protection layer and a special outer ridge which acts like a bumper and prevents sidewall damage during grinds. Max pressure rating: 110psi. ###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 110 PSI WEIGHT: 615g (21.7oz) PACK SIZE: Single
Eclat's Vapour Tyre is a take on the classic "dirt tyre", after working closely with Tyson Jones-Peni, Dylan Lewis and other riders on the team they've created new tyre that's smooth on trails and runs fast in the bowl. Featuring cobweb technology for superior strength, a specialised race compound rubber with a fast-rolling center section and a unique multi-textured tread pattern providing superior grip on all surfaces. Max pressure rating: 100psi "###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 100 PSI PACK SIZE: Single WEIGHT: 2.4" - 698g (24.5oz) 2.25" - 664g (23.4oz) "
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. Available in several widths, to fit rims and tyres from Gravel to Plus. Premium material (high density EVA) absorbs shocks but not sealant Very light weight (starting at 53g for one 29” wheel) and high durability Can be easily adapted to common wheel diameters (26”, 27.5”, 29”) No need for specific tubeless valves Fitment 35 - 18-25mm Rim Width 40 - 20-30mm Rim Width 50 - 25-25mm Rim Width 55 - 30-40mm Rim Width 60 - 35-50mm Rim Width
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. Available in several widths, to fit rims and tyres from Gravel to Plus. Premium material (high density EVA) absorbs shocks but not sealant Very light weight (starting at 53g for one 29” wheel) and high durability Can be easily adapted to common wheel diameters (26”, 27.5”, 29”) No need for specific tubeless valves Fitment 35 - 18-25mm Rim Width 40 - 20-30mm Rim Width 50 - 25-25mm Rim Width 55 - 30-40mm Rim Width 60 - 35-50mm Rim Width
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave. Available in several widths, to fit rims and tyres from Gravel to Plus. Premium material (high density EVA) absorbs shocks but not sealant Very light weight (starting at 53g for one 29” wheel) and high durability Can be easily adapted to common wheel diameters (26”, 27.5”, 29”) No need for specific tubeless valves Fitment 35 - 18-25mm Rim Width 40 - 20-30mm Rim Width 50 - 25-25mm Rim Width 55 - 30-40mm Rim Width 60 - 35-50mm Rim Width
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
The Effetto Tyreinvader is an anti-pinch-flat insert for tubeless tyres. Very simple to use and light, it saves your tyres and rims from hard impacts without interfering with the way your wheels behave.Available in several widths, to fit rims and tyres from Gravel to PlusPremium material (high density EVA) absorbs shocks but not sealantVery light weight (starting at 53g for one 29 wheel) and high durabilityCan be easily adapted to common wheel diameters (26 , 27.5 , 29 )No need for specific tubeless valvesPeople riding aggressively on rocky terrain wish to reduce their inflating pressure for better traction and control, and at the same time they need to avoid hitting hard , pinching the tyre casing between the rim and a rock, cutting it and/or damaging the rim. That s where tyre inserts (anti-pinch-flat inserts, tyre noodles, etc.) can be helpful. These devices fit inside tubeless tyres and absorb a part of the impact, protecting tyre and rim. With TyreInvader we want to offer an excellent yet simple solution, keeping weight and cost low. Learn more about tyre inserts in general in this tech article.No influence on normal riding - TyreInvader is flat, and it will basically come into play only when needed (unlike round inserts that are compressed quite often during normal riding). It s still better to test ride TyreInvader before racing it. We don t suggest using lighter tyres nor to go incredibly low with inflating pressure: just set you tyres up the way you like them, and don t worry about pinch flats.The weights for the different TyreInvaders refer to the product uncut (for 29 wheels), so it s even lower when adapted to 27.5 or 26 wheels.TyreInvader 35 = 48 gTyreInvader 40 = 53 gTyreInvader 50 = 68 gTyreInvader 55 = 80 gTyreInvader 60 = 92 gTolerance on nominal weight is + / 5%Premium material - TyreInvader is made of high density EVA, a very durable/strong/light foam employed by the sport shoe industry: this material can resist heavy impacts with very little damage. We recommend to check Tyreinvader once a year or after hard riding sessions, and to replace it if needed.Sealant-optimised - EVA has a closed-cell structure that cannot absorb any sealant. Additionally, the cut-outs of TyreInvader allow the sealant to easily move around, to make sure punctures can be quickly fixed.As inserts have surfaces that are wetted by the sealant, a fraction of it won t be available to move around to do its job. For this reason, also with TyreInvader we recommend to slightly increase the quantity of sealant normally employed, by 30 ml. TyreInvader has been designed to function with our Caffélatex sealant, ammonia free.Easy to assemble and mount - Just cut TyreInvader following the instructions (for 27.5 and 26 ; no need to cut for 29 ), join its two ends with the two (provided) zip-ties, mount it inside the tyre (it will stretch a little bit to fit the diameter no worries), add sealant, go ride. Our Tech Videos can help clear any doubt.Real run flat behaviour - TyreInvader has been sized to sit tightly on the rim, so that in case of emergency it will push the tyre against the rim, allowing the rider to finish the run or ride until it s safe to stop. This should be considered an exceptional functioning mode, as we don t recommend you ride with TyreInvader at zero pressure.Compatible with any tubeless valve - The shape of TyreInvader prevents it for sitting over the valve base, on most rims. To make sure it doesn t happen on any rim, TyreInvader has an open slot, to be positioned over the valve.Size Guide:35 - Rim External Width: 18-25mm - Tyres: 32-42mm/1.25-1.5"40 - Rim External Width: 20-30mm - Tyres: 42-54mm/1.5-2.1"50 - Rim External Width: 25-35mm - Tyres: 54-60mm/2.1-2.4"55 - Rim External Width: 30-40mm - Tyres: 57-65mm/2.25-2.6"60 - Rim External Width: 35-50mm - Tyres: 63-80mm/2.5-3.2"
Characteristics Made of polyester: the best material for technical tapes, with very high mechanical properties. Stable: it easily conforms to rim shapes and has low memory (it doesn’t ‘spring back’ once put down in the rim channel). Adhesive Strength: State of the art. The adhesive can stick to silicone-treated paper and is much more tolerant to less than perfect rim cleaning before tape application Sealed: to preserve the tape properties and to underline its "technical product" status, each tape is now contained into a re-sealable bag.