Nukeproof Horizon Pro Brass 35mm Tubeless ValveAt 10mm shorter than Nukeproof's standard valve, this 35mm tubeless valve is less likely to be struck by trail debris such as rocks. The lower profile valve is complimented with further strength gains by using brass and a revised wall thickness. As a result, these updates make this valve super strong and only 2g heavier at 14g for the pair.As with Nukeproof's standard valves, this valve is fully compatible with tyre insert systems such as Nukeproof ARD and other brands. This model also benefits from a removable core, ensuring you can get the most airflow from your pump or cartridge. The head of this valve has also been designed to sit on top, enabling easier inflation and deflation.The same custom cap has been used with the integrated core remover, which allows for the core to be removed and fitted without specialist tools, while at the trailside or working from home. The nut has been designed so that you can get a good grip on the flat edges to firmly tighten the valve to the rim.An O-ring is included and sits against the outside of the rim to prevent damage from the nut tightening against the rim.How to InstallRemove the valve cap and nut, insert the valve through the rim, fit the O-ring to the valve, thread on the nut and tighten by hand. Features: Material: Brass Use: Mountain Bike (MTB) Wheel Compatibility: Nukeproof ARD and other rim defense systems Length: 35mm Shared top cap with integrated core remover as standard valve Single or Pair: Pair Weight: 14g (pair)Manufacturer's Part Number: NUKFTWG18AB-35LNF12R4BLK Black 35mmBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Muc-Off Puncture Plug Tubeless Tyre Repair KitThe Puncture Plug Tubeless Repair Kit from Muc-Off is a convenient and beneficial repair kit that gets your damaged tubeless tyres rolling again in no time. This lightweight and easy to use tool repairs even larger punctures and for use with Road, MTB and Gravel bikes.Fast and Dependable Tubeless Tyre Puncture RepairWhen a puncture is simply too big to seal, the Muc-Off Puncture Plug Repair Kit is the ultimate backup tool that's lightweight and easy-to-use. The tough and durable handle and 2-in-1 puncture plug/reamer tool comes with 5x thick plugs and 5x thin plugs packed all packed together in a handy storage pouch. Compatible with all tubeless road, MTB and gravel tyres. Refill packs with 10 repair plugs (5x thin and 5x thick) available separately.Features: 2-in-1 puncture plug/reamer tool 5x thick plugs and 5x thin repair plugs Convenient and handy storage pouch Compatible with all Tubeless Road, MTB and Gravel tyresBuy Muc-Off Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
WTB TCS Tubeless Rim Tape Roll (66m)Light, strong, and extra sticky for durable long lasting leak proof performance.TCS Tubeless Rim Tape Width Cross Country: 19mm - 22mm Trail: 21mm - 24mm All Mountain / Enduro: 23mm - 26mm Freeride / Downhill: 27mm - 30mm Buy WTB Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
WTB TCS Tubeless Rim Tape Roll (66m)Light, strong, and extra sticky for durable long lasting leak proof performance.TCS Tubeless Rim Tape Width Cross Country: 19mm - 22mm Trail: 21mm - 24mm All Mountain / Enduro: 23mm - 26mm Freeride / Downhill: 27mm - 30mm Buy WTB Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Giant Tubeless Valve stems for 55mm high profile rims Approx 70mm from shoulder
Set of 2 pieces,Removable core,Brass valve shaft,NSL technology for better airflow,Rubber squared base for a better seal.
The final part of any tubeless kit is the valves. Designed to fit snugly in the rim's valve hole, the Effetto Mariposa Caffelatex Tubeless Valve is lightweight, easy to use and incredibly durable.Lightweight and durable aluminium constructionConic adaptors allow them to adapt to any rim profileSuitable for presta or schrader rimsRemovable valve cores make sealant injection easyThe Caffelatex Tubeless Valves come with clever conic adaptors that allow them to be used with rims drilled for both presta and schrader valves. Constructed from lightweight aluminium, the valves are incredibly durable and also look great. Removable valve cores also make it easy to inject your sealant of choice through the valves and into the tyre. Versatile, lightweight and easy to use, the Effetto Mariposa Caffelatex Tubeless Valves are some of the best you can buy.
Challenge's new Smart Tubeless Sealant is now available!Specifically conceived not to damage Challenge's high-end Handmade TLR tyres or Tubeless Tubulars. Smart Tubeless Sealant can close up to 6mm cuts and remains liquid for a long time, moving around the tyre without drying or balling up, especially after inflating with CO2 cartridge.Key Features:Closes cuts up to 6mm.,Does not damage Challenge's;high-end Handmade TLR tyres,or Tubeless Tubulars.,.,Remains liquid for a long time,,Moving around the tyre without drying or balling up,,Especially after inflating with CO2 cartridge..
This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails.One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. Instructions for Use: Remove any old tape and sealant residue,Ensure rim is clean and dry,Start opposite the valve hole and maintain tension as you apply tape,Work air bubbles out as you tape the wheel (Push them out via the spoke holes),Apply one layer of tape with a 4" overlap,Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim,Pierce a small hole and insert your valve,.Features:Length: 10mSuitability: Downhill, Enduro
The Birzman Tubeless Repair Kit makes puncture repair quick and easy. The CO2 cartridge shaped kit has a durable and compact design, with the cartridge shape including threads for storage of your inflator head. It also makes it compatible with Birzman's range of handy CO2 canister mounts. Should you puncture out on the trail and the puncture is too large for the tubeless sealant to be effective, the cleaning file and insertion tool make for easy plugging of the hole with a tyre plug, ten of which are included. If you find yourself with a punctured tubeless tyre, the Birzman Tubeless Repair Kit is here to the rescue!
Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 – 3mm wider than your inner rim width. Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valve
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.