The Crosscut AT 2 is a fast rolling durable all terrain tyre with a 60tpi casing and a silica based compound. Increased puncture protection comes from the innovative Defect 2 lite puncture protection without adding weight. Read more about Tubeless including installation and maintenance help. Features Use: 50% Road / 50% Gravel Casing: Durable 60tpi Bead: Wire Compound: Silica based Features: Centre line wear indicator Puncture protection: Defect 2 Lite Weight: 673g (700x38c) Size: 700c x 38mm
Designed for folding bikes or any bike with a braze-on fitting point on the head tube.
Designed to get you home - the spacesaver for road cycling.78% lighter than a standard tube and 75% smaller to take up the least amount of space in your jersey pocket,Same rolling resistance as a latex tube,Suitable for disc brakes only,Weight: 42g (26”), 44g (27.5”), 45g (29”).
Features:Designed to get you home - the space saver for cycling.,78% lighter than a standard tube and 75% smaller to take up the least amount of space in your pack or jersey.,As robust as a standard butyl tube,Removable valve stem maximise space saving,Same rolling resistance as a latex tube,Weight : 38g.
Due to its reduced wall thickness, S-Tubo-BMX weighs 80% less as standard rubber tubes. This low weight makes high jumps and bar spins a piece of cake. Furthermore, the low rolling resistance can be the decisive competitive edge for BMX racers.80% weight saving compared to standard rubber tubes,Tested from and developed with world’s best BMX riders from all disciplines, such as UCI World and European Champion Irina Sadovnik,Low weight makes high jumps and bar spins a piece of cake,Low rolling resistance has the decisive competitive edge.
Designed to get you home - the spacesaver for MTB.78% lighter than a standard tube and 75% smaller to take up the least amount of space in your pack or jersey.,As robust as a standard butyl tube,Removable valve stem maximise space saving,Weight: 42g (26”), 44g (27.5”), 45g (29”).
Valve and rim tape,22mm width,For two wheels,Packaged.
Tubeless high pressure rim tape, colour black, width 20-30mm , length 6-9m for 2 layer application on one wheel set (2 wheels), 0.15mm thick, PP material
With design, sustainability & quality running right to the core, there's only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come.Made from premium lightweight, high strength 7075 aluminium, Peaty's MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or new bike.Instructions:Remove valve cap, o-ring and lock nut.,Insert valve through valve hole in rim.,Push the o-ring onto valve stem.,Thread the lock nut onto valve stem.,Hand tighten lock nut until firm.,Screw on valve cap..
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors
Designed to provide you with a better sports bicycle experience the PRO Discover Top Tube Bag provides bike packers with an easily accessible storage solution. It features a 700-millilire capacity, a waterproof construction as well as a waterproof zipper. A cable exit port allows you to charge a GPS head-unit while riding and a bungee cord provides added storage options. The Discover Top Tube Bag attaches to your bike via two bolts or sturdy Velcro straps.Top tube bag for bike packingEasy to reach storage space700ml capacityWaterproof constructionWaterproof zipperWeight: 107gTwo-bolt or Velcro attachment optionsCable exit for charging while ridingBungee cord storage for quick access to small itemsReflective details for increased visibility
Despite this mountain bike tube's low weight of only 45 grams (29" version), this inner tube is just as puncture-proof as standard tubes and therefore very well suited as a replacement tube for tubeless tyres. Suitable for all-mountain bikes with disc brakes. The Ultralight, Extra Durable Bicycle Tube For a long time, the innertube has been overlooked in the bicycle industry. Tubolito are changing that. Their vision: The perfect inner tube. Street, Trail or City - Developed for the optimal cycling experience. Lightweight: 2/3 Lighter Than A Standard Tube Every gram counts. Even more if you reduce the rotational weight. Tubolito offers an easy and achievable weight tuning. Tubolito can provide this solution by combining a new material with a self-developed production technology. Tough 2x Stronger Than Standard Tubes Lighter and more robust. Tubolito solves this contradiction by using a new concept: manufacturing the tube with a thermoplastic elastomer, called TPU - materials known for durability and excellent damping. Their goal to transform these excellent material characteristics into an outstanding bicycle product, reducing contact areas and seams. Developed and Manufactured in Europe Tubolito tubes are manufactured in Europe, and all assembly parts are sourced in Europe. This allows Tubolito to maintain very high-quality standards. Manufacturer's Part Numbers: TL-33000015 Black 3 Presta 29x1.8" - 2.5" TL-33000014 Black 2 Presta 27.5x1.8" - 2.5" TL-33000013 Black Presta 26x1.8" - 2.5"