The Stans NoTubes The Solution Tyre Sealant started a tubeless revolution. Inside this simple black bottle is a product that changed cycling. Today s tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan s Tire Sealant.First choice of riders around the world for tubeless conversion and flat preventionSeals punctures up to 1/4 (6.5mm) quicklyStays liquid 2-7 months for long-lasting protectionPremium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)Natural materials, safe for the environmentCan be injected through valve stems with removable cores compatible with tubes and tubular tiresJust two ounces of Stan s in a converted standard tire or tubeless tyre can repair punctures up to 1/4 almost instantly to keep you rolling. Longer-lasting Stan s Tyre Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan s Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires.
The Stans NoTubes The Solution Tyre Sealant started a tubeless revolution. Inside this simple black bottle is a product that changed cycling. Today s tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan s Tire Sealant.First choice of riders around the world for tubeless conversion and flat preventionSeals punctures up to 1/4 (6.5mm) quicklyStays liquid 2-7 months for long-lasting protectionPremium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)Natural materials, safe for the environmentCan be injected through valve stems with removable cores compatible with tubes and tubular tiresJust two ounces of Stan s in a converted standard tire or tubeless tyre can repair punctures up to 1/4 almost instantly to keep you rolling. Longer-lasting Stan s Tyre Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan s Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires.
The next level in sealing power from the people who invented tubeless conversions. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance. The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, Race Sealant is not compatible with injector or other valve installation.Faster and better sealing capabilities to keep you rollingTwice the sealing crystals compared to the standard sealantSeals larger punctures to get you home or to the finish line XL crystals and standard crystals combine to seal larger puncturesRide the widest range of conditions and temperaturesPremium low-viscosity latex stays liquid to seal fasterSafe for the environmentComprised of natural materialsMust be poured directly into tyreNot compatible with injector or other valve install methodsFor best performance inspect sealant every 2 weeksFor nearly fifteen years Stan has been quietly formulating a special racing version of our legendary sealant for many of cycling's most successful teams. Working with athletes who push themselves and their tubeless systems to the absolute limit, we've developed a proprietary sealant formula with close to twice the amount of our standard sealing crystals plus our special "XL" crystals capable of sealing even larger punctures. Stan's Race Sealant's combination of large and smaller sealing crystals interlock to form a lattice work that not only seals but strengthens and reinforces the area of the puncture, allowing for an entirely new level of sealing performance.The quantity and size of crystals in this special formula means that Stan's Race Sealant can only be installed directly into the tire. As a result of its immense sealing capabilities, Race Sealant is not compatible with injector or other valve installation methods. Race sealant should be inspected every 2-3 weeks for best performance. Be sure to rinse race sealant out of used tires intended to be stored/reinstalled.
The Stans NoTubes The Solution Tyre Sealant started a tubeless revolution. Inside this simple black bottle is a product that changed cycling. Today s tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan s Tire Sealant.First choice of riders around the world for tubeless conversion and flat preventionSeals punctures up to 1/4 (6.5mm) quicklyStays liquid 2-7 months for long-lasting protectionPremium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)Natural materials, safe for the environmentCan be injected through valve stems with removable cores compatible with tubes and tubular tiresJust two ounces of Stan s in a converted standard tire or tubeless tyre can repair punctures up to 1/4 almost instantly to keep you rolling. Longer-lasting Stan s Tyre Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan s Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires.
For years Stans NoTubes tyre sealant has been the saviour of riders all over the world, fixing punctures in an instant. But what happens when you have a puncture that's simply too big for sealant to seal it This is where the DART Tool comes in!Repairs large punctures and slices, reacting with Stan's sealant to form an airtight sealBarbed tip anchors into tyre and will pull out when ridingWears away clean with no trimming needed and cannot be felt when riding, even on slick road tyresLightweight and compact tool fits the shape of your hand and has built in valve core removerIncludes two pre-loaded DARTs for sealing multiple and larger puncturesStans developed the DART (Dual Action Repair for Tubeless) to help riders fix tyres faster, easier and flat out better than existing tubeless repair plugs and tools. More than just a physical plug, the DART creates a chemical reaction with Stan's sealant to provide a permanent airtight bond instantly. The material of the DART is also more flexible than other plugs on the market, with its laser-cut shape optimised to contour to the shape of different punctures, maximising surface area to increase the sealing reaction, fixing bigger punctures quicker. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won t pull out while riding the way a conventional plug can. One of the best features of the DART s design is that it doesn t require trimming once inserted, and excess material won t get in the way of your ride. You can t even feel them while riding, even on road tires, and they wear smooth naturally.But Stan's didn't stop with the plugs themselves. Many plug tools mimic the tools used for car tyres and can cause damage to rim tape or even cut your hands. The DART's plastic tip is safer on rims, rim tape and your hands. The tip of the DART Tool is also double-sided and reversible, allowing it to hold two DART plugs on each side, making it possible to install two at once to quickly seal the largest slices and punctures. The clear thread-on cap protects the contents of the tool, keeping them clean and ready to use, while being easy to see through to ensure you have a fresh DART plug ready for when you really need it. The DART Tool is designed to be extremely light, durable and easy to fit into pockets and packs, while offering an ergonomic design that s easy to hold and allows precise DART placement. The DART Tool s handle includes a built-in valve core remover, making it easy to add sealant. Simple, effective, lightweight and incredibly easy to use, the Stans NoTubes Dart Tool is the ultimate tubeless repair kit!
The Stans NoTubes DART Refill Kit is ideal for topping up the tubeless repair plugs in your DART Tool. The Refill Kit contains 5 DART plugs to help keep you on the trail by sealing the biggest punctures and slices that the sealant can't handle on its own. More than just a physical plug, the DART creates a chemical reaction with Stan's sealant to provide a permanent airtight bond instantly. The material of the DART is also more flexible than other plugs on the market, with its laser-cut shape optimised to contour to the shape of different punctures, maximising surface area to increase the sealing reaction, fixing bigger punctures quicker. If you need to top up your DART Tool, you need the Refill Kit!
The Blackburn Mini Plugger is an essential tool for modern riders with tubeless tyres, road, or dirt. The Mini Plugger is a quick, one-shot tyre-plugging system with a tiny profile to easily store and access in pockets, bags, or packs. A self-contained rescue tool when and where you need it most.Ultralight & minimal sizeEasy to pack or pocket cylinderMetal needle for pluggingDual threaded storage cap
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
The Stans NoTubes Arch MK4 Rim is designed for hard charging trail bikes that need to climb as well as they descend. With a tough but lightweight 6069 aluminium construction and a 28mm internal width, the Arch MK4 is the perfect all rounder.Versatile 28mm internal rim width optimized for 2.2-2.5 tiresLight and durable 6069 aluminium with welded joint and reinforced spoke bedBST Asymmetric design combines Stan s legendary easy tubeless inflation with a stronger, more balanced wheel build3-year rim warranty with 1-year crash replacementThe Arch MK4 rim is light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing. Constructed of light and strong 6069 aluminium alloy, with a reinforced spoke bed and 28mm internal width ideal for 2.2-2.5 tires, the Arch MK4 can get you up the climbs easier and make the descent even better.The Arch MK4 s BST Asymmetric shape improves spoke angle, allowing for a stronger overall wheel build. Unlike most asymmetric rims that struggle with tubeless inflation and consistent airtight seal under hard cornering, the Arch MK4 s shape is designed to equalize pressure for easy inflation and incredibly strong tire retention on both sides of the rim. All this makes the Arch MK4 simply the best choice for all-around riding. Powering up rocky switchback climbs or slapping berms on every descent, the Arch MK4 is ready for whatever you can throw at it.
The BORG 26 All Weather wheelset provides guaranteed reliability in all conditions. The wheels are built with high mileage riders in mind and therefore are suitable for all types of riders. Those that ride in the foulest of conditions and simply need dependable wheels will love these wheels from BORG. Dependable does not have to heavy though. The BORG 26 have every detail covered. A robust all-weather wheelset for rim brakesStiff yet comfortableTriple butted Sapim spokesShimano8/9/10/11 speed, SRAM AXS 12 speed or Campagnolo 9/10/11/12 speed freehub24mm wide tubeless tyre ready rims (tubed tyre compatible also)26mm deep rimsLife of the rim warrantyWeight from 1760g 32 spoke with Campagnolo hubsBlack hub, rim and spokesMiche Primato HubsThe wheels are hand built in the BORG shop. They are mainly used as an all-weather training wheelset. The rims are not expensive if they need to be replaced which is unlikely and the hubs, well they love the wet. Bearing life is long in all conditions. The rim is 24mm wide and 26mm deep. It weighs 475g. The rear rim has offset drilling for increased NDS spoke tension (this is a good thing for spoke life). The internal width of this rim is 19mm and it has a 2mm thick spoke nipple bed. All tyres will sit wider on this rim than they would on a narrower one. This improves rider comfort due to the increased air volume and due to the different tyre shape handling in the bends particularly over broken road surfaces is improved. These wheels are robust, and the rims are low cost meaning they are perfect training wheels and ideal for wet weather/winter use. They are supplied tubeless ready with tubeless tape and valves. Tubed tyres can of course be fitted and are an easy fit. Even Schwalbe Marathons fit with ease. Please note that the images are for illustration purposes only.
The IRC Formula Pro RBCC Tubeless Road Tyre is race tyre with the emphasis on wet grip and durability. This tyre is the ultimate all round race tyre. Offers superb grip in wet conditionsHighly durable tyre with a high TPI casingRace proven tyres fully tested in the UKOffers a superb ride and low rolling resistanceMore tread cover on the tyre improves grip in cornersThere are lower rolling resistance tyres, but they tend to puncture more easily and don't have the same grip across a range of conditions. The rice bran ceramic compound (RBCC) has been revised to improve grip in wet conditions. IRC claim a 4% improvement and a 10% drop in rolling resistance. These are race tyres and have been race proven in the U.K throughout 2017/18. After a season racing by Team on Form the tyres and a Belgian team are not even close to worn and have helped the riders clock up wins. The tread rubber now covers more of the tyre so you can lean even further into a bend than you probably should. The natural latex lining is retained to improve comfort and reduce rolling resistance. The High TPI casing means the ride on these tyres is sublime. Rough roads are taken in their stride. The new tyres measure 25mm and 28mm on wide rims! Unlike most brands IRC know wide rims offer the best performance and a 28mm tyre that sits like a 31mm tyre is not going to fit in many bikes. The tyres also do not sit tall and this is useful for those running mudguards.
Designed in conjunction with Chris King, Peaty's MK2 Tubeless Valves are made from premium lightweight, high strength 7075 aluminium, and fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.Lightweight & durable 7050 aluminium constructionColoured to match Chris King componentsSlotted base compatible with or without tyre insertsValve caps double as 3.4mm spoke key and valve core removal toolThe unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, the MK2 valves have a straight-through design so there's no reduction of sealant or air flow when tyre inserts are not used.Fitting couldn't be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.