Lightweight Trail/Enduro wheel built using a light yet super wide Alex Volar tubeless ready rim, 142X12mm 120 point sealed bearing hub and lightweight Mach1 double butted spokesOur new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,Built using the Alex Volar 3.0 rim with its massive 30mm internal profile which offers increased air volume and unrivaled traction due to lower pressure possibilities,Chosen Trail hub Rear 142 x 12mm axle, 4 sealed bearings, 32h, 9/10spd.,120 point engagement MGC freehub system allows for almost instant drivetrain engagement and an idividual freehub noise.,Mach1 double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Sram XD freehubs available - Part No. SJFHBXD.,135 x 12mm axle adapters available - Part No. SJTR135X12KIT.,135 Q/R axle adapters available - Part No. SJTR135QRRKIT,29" wheel 1171g.
Head tube reamer 1 1/8" (34 mm) complete with reamerCyclus Tools special tool to face 1 1/8" (34 mm) head tubes.The head tube reamer creates coaxially exact plane cup seats on the head tube.max. head tube length: 190mm max. milling depth: 15mm max. wall tube thickness: 4 mmUseFirst remove the conical guide from the spindle.Insert the tool from above into the head tube of the frame. Put the conical guide on the spindle again and apply pressure with the spring.Rotate the tool clockwise. Use cutting oil while working. Continue to rotate clockwise while taking the tool out of the head tube.Repeat the above steps to ream the bottom side of the head tube.TipBefore reaming remove evetually existing chrome plates on the frame to avoid early abrasion of the reamer.After reaming you might need to remove sharp edges with file.After the use clean the reamer and keep it in a safe place.
If youre a tubeless tyre convert youll wonder how you lived without this pump. Just pressurize the chamber and with a simple flip of the burly switch all that air floods the tire giving it no option but to seal and air up. Once seated flip the switch back to bypass the chamber and you can top it off accurately with the giant gauge. Now everyone can seat tubeless tires without a garage full of compressors and hoses. The two-position switch means youre charging or youre inflating. Charge the chamber position one. In position two that air is forced into the tire. You can now use the Chamber like a regular floor pump. No more hot air. Once youve seated your tire the switch bypasses the auxiliary air chamber and the direct-to-valve technology lets you pump the tire instantly without going through the chamber all over again. A riser bar with comfortable grips comes stock but a regular 31.8mm stem clamp allows you to fit your favourite handlebar for welcome familiarity and sneaky training. No one likes being right next to an inflating tubeless tire do they? Our 4ft hose lets you keep out of the way while also allowing you to inflate tires whether theyre on a hitch rack or repair stand or around the corner. Our huge 2.75in top-mounted gauge lets you easily read the pressure without stooping and the button on the pump head lets you micro-adjust pressure. Works on any type of bicycle value with the flick of a lever. No leaking no fuss clean and simple. • Two-position switch to charge or inflate• Direct-to-valve technology lets you pump tire instantly• Includes riser bar with comfortable grips• 31.8mm stem clamp accommodates your favourite handlebar• Includes 4ft hose• 2.75in top-mounted gauge lets you read pressure without stooping• Button on the pump head lets you micro-adjust pressure• Works with Presta/Schrader/Dunlop valves with the flick of a lever• Aluminium barrels
CushCore Gravel-CX Tubeless Tyre Insert SetThis insert set is specifically engineered for the demands of gravel bike riding and cyclocross (CX) racing and includes everything you need to transform how your bike's tyres respond to bumps, vibrations and shocks from the terrain. Benefitting from a revolutionary concept that improves suspension performance and reduces impact force, it's a great choice of upgrade for increased confidence on your back road and countryside adventures. With increased sidewall stability, CushCore has developed this model to allow for harder cornering, making it ideal for cyclocross while also eliminating tyre squirm and burping, even at low tyre pressure. Another highlight is it delivers reduced rolling resistance and a smoother overall rolling experience, meaning you can ride faster with more control, more momentum, and less fatigue.How It WorksNot all tyre inserts are created the same. CushCore is no ordinary tyre insert and is based on a new concept, tyre suspension. Any suspension system has a spring and a damper, and with CushCore, pressurised air in the tyre is the spring and the CushCore tyre insert is the damper. Like traditional suspension, a constant damping force wouldn't work. It has to be dynamic. Suspension should be supple on small bumps but firm on the big hits. CushCore responds differently depending on the tyre load and scenario. The more the tyre flexes, the more damping it provides.Go BiggerCushCore improves suspension performance by 16% and reduces impact force from big hits by 50%. Send it with total confidence.Corner Harder35% more sidewall stability eliminates tyre squirm and burping, even at low tyre pressure. Rail corners with total confidence.Ride FasterCushCore provides a 12% smoother ride and 3% reduced rolling resistance. Ride with more control, more momentum, and less fatigue. It's like taking fewer punches in a fight.Features: Use: Gravel, Cyclocross (CX) Tyre Widths: 33mm-46mm Inner Rim Width: 19mm-26mm Wheel Size: 700c Includes: x2 CushCore tyre inserts, 2x 44mm CushCore Presta air valves, valve core tool, installation instructions and rim stickers Tubeless Ready Unrivalled impact protection Super stable cornering Superior traction Weight: 120gTechnologies: CushCore transforms your tubeless tyre into a suspension system with a tune-able air spring and foam damper. A proprietary closed-cell, polyolefin foam controls compression and rebound forces. Its lightweight, ultra durable and impervious to sealant. CushCore's patented profile applies constant pressure on the tyre sidewalls. This provides protection and stability even at low tyre pressures. CushCore is designed to fit tight on the rim. This radial tension locks the bead to the rim while maintaining a supple tread patch.Manufacturer's Part Numbers: CC-70023 Grey 700cBuy CushCore Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
CushCore MTB Pro Plus Tubeless Tyre Insert SetQuickly becoming one of the must-have names for tyre inserts, CushCore's MTB Pro series is trusted by the world's best riders and ridden to victory by the 2020 Men's and Women's UCI Downhill World Champions, Women's eMTB World Champion, as well as multiple Enduro World Series wins. This mountain bike (MTB) insert set is specifically designed for plus-sized tyres and wider rims, allowing you to push the limits of your tyres and suspension to new levels. Boasting 35% more sidewall support, 16% improved suspension performance, 12% less shocks and vibrations and 50% more impact protection, this model is ideal for trail riding, enduro and downhill racing.How It WorksNot all tyre inserts are created the same. CushCore is no ordinary tyre insert and is based on a new concept, tyre suspension. Any suspension system has a spring and a damper, and with CushCore, pressurised air in the tyre is the spring and the CushCore tyre insert is the damper. Like traditional suspension, a constant damping force wouldn't work. It has to be dynamic. Suspension should be supple on small bumps but firm on the big hits. CushCore responds differently depending on the tyre load and scenario. The more the tyre flexes, the more damping it provides.Go BiggerCushCore improves suspension performance by 16% and reduces impact force from big hits by 50%. Send it with total confidence.Corner Harder35% more sidewall stability eliminates tyre squirm and burping, even at low tyre pressure. Rail corners with total confidence.Ride FasterCushCore provides a 12% smoother ride and 3% reduced rolling resistance. Ride with more control, more momentum, and less fatigue. It's like taking fewer punches in a fight.Features: Use: MTB, Enduro and Downhill Tyre Widths: 2.6-3.0" Inner Rim Width: 32-45mm Includes: 2x CushCore tyre inserts, 2x 44mm CushCore Presta air valves, valve core tool, installation instructions and rim stickers Tubeless Ready Unrivalled impact protection Super stable cornering Superior traction Weight: 27.5" Option: 290g; 29" Option: 330gTechnologies: CushCore transforms your tubeless tyre into a suspension system with a tune-able air spring and foam damper. A proprietary closed-cell, polyolefin foam controls compression and rebound forces. Its lightweight, ultra durable and impervious to sealant. CushCore's patented profile applies constant pressure on the tyre sidewalls. This provides protection and stability even at low tyre pressures. CushCore is designed to fit tight on the rim. This radial tension locks the bead to the rim while maintaining a supple tread patch.Manufacturer's Part Numbers: CC-27523 Grey 27.5" CC-29203 Grey 29"Buy CushCore Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Alex CX28 tubeless ready rims, 28mm deep section, 17mm internal width & 21.8mm external width. This added width accepts 25c tyres to perfection, which together will offer reduced rolling resistance, increased comfort & better handling.,Chosen 28h hub – 6 bolt Disc version. 135mm Q/R axle type. 4 sealed cartridge bearings.,120 point MGC freehub system offers almost instant drivetrain engagement with a unique freehub sound.,9/10/11Spd Shimano compatible freehub.,Campagnolo freehub bodies available - Part No. SJFHBCAMP.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spokes with brass nipples.,3 cross lacing pattern for increased durability.,Individual wheel weight 885g..
Key Features:Alex Draw 1.9s tubeless ready rims, 23mm deep section, 19mm internal width & 24mm external width. This added width will offer reduced rolling resistance, increased comfort & better handling.,Chosen 28h hub – 6 bolt Disc version. 142 x 12mm thru axle type. 2 sealed cartridge bearings,11 speed Shimano freehub complete with spacer for use with 9 & 10 speed cassettes.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spokes with brass nipples.,3 cross lacing pattern for increased durability.,Sram XD freehubs available - Part No. SJFHBXDCX,135 Q/R axle adapters available - Part No. SJCX135QRRKIT,Individual wheel weight 870g..
Key Features:Our new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,26" & 27.5" versions use the Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger.,29" version uses the Alex Volar 2.3 tubeless ready rim, 23mm internal & 28.4mm external widths - Creates a perfect tyre profile for tyre sizes of 2.25" or larger.,Chosen Trail hub – Rear 142 x 12mm axle, 4 sealed bearings, 32h, 9/10spd.,120 point engagement MGC freehub system allows for almost instant drivetrain engagement and an idividual freehub noise.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Sram XD freehubs available - Part No. SJFHBXD.,135 x 12mmaxle adapters available - Part No. SJTR135X12KIT.,135 Q/R axle adapters available - Part No. SJTR135QRRKIT,26” wheel 982g / 27.5” wheel 1016g / 29" 1039g..
Key Features:Our new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,26" & 27.5" versions use the Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger.,29" version uses the Alex Volar 2.3 tubeless ready rim, 23mm internal & 28.4mm external widths - Creates a perfect tyre profile for tyre sizes of 2.25" or larger.,Chosen Trail hub – Rear Q/R 135mm, 4 sealed bearings, 32h, 9/10spd.,120 point engagement MGC freehub system allows for almost instant drivetrain engagement and an idividual freehub noise.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Sram XD freehubs available - Part No. SJFHBXD.,135 x 12mm axle adapters available - Part No. SJTR135X12KIT.,142 X 12MM axle adapters available - Part No. SJTR142X12KIT,26” wheel 982g / 27.5” wheel 1016g / 29" 1039g..
Key Features:Our new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,26" & 27.5" versions use the Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger.,29" version uses the Alex Volar 2.3 tubeless ready rim, 23mm internal & 28.4mm external widths - Creates a perfect tyre profile for tyre sizes of 2.25" or larger.,Chosen Trail hub – Rear 142 x 12mm axle, 4 sealed bearings, 32h, 9/10spd.,120 point engagement MGC freehub system allows for almost instant drivetrain engagement and an idividual freehub noise.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Sram XD freehubs available - Part No. SJFHBXD.,135 x 12mmaxle adapters available - Part No. SJTR135X12KIT.,135 Q/R axle adapters available - Part No. SJTR135QRRKIT,26” wheel 982g / 27.5” wheel 1016g / 29" 1039g..
Key Features:Our new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,26" & 27.5" versions use the Alex Volar 2.5 tubeless ready rim, 25mm internal & 30.2mm external widths - Creates a perfect tyre profile for tyre sizes of 2.35" or larger.,29" version uses the Alex Volar 2.3 tubeless ready rim, 23mm internal & 28.4mm external widths - Creates a perfect tyre profile for tyre sizes of 2.25" or larger.,Chosen Trail hub – Rear Q/R 135mm, 4 sealed bearings, 32h, 9/10spd.,120 point engagement MGC freehub system allows for almost instant drivetrain engagement and an idividual freehub noise.,ACI Alpina double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,Sram XD freehubs available - Part No. SJFHBXD.,135 x 12mm axle adapters available - Part No. SJTR135X12KIT.,142 X 12MM axle adapters available - Part No. SJTR142X12KIT,26” wheel 982g / 27.5” wheel 1016g / 29" 1039g..
A smart upgrade for your road bike is now even smarter. Lighter, and smoother riding, the Ksyrium UST delivers proven performance and new Road Tubeless technology. 19mm internal rim width Straight-pull bladed double butted spokes deliver optimal stiffness Quick-Release Only 755g without tyre