Stans No Tubes The InjectorThe Injector is Stans no tubes way of imputing sealant into your tubeless wheel as clean and as easy as possible. Designed to work with Presta and Schrader valves with a syringe capacity suited for both MTB and Road.Features:Easy applicationCompatible with Schrader and Presta ValvesReusable 20z SyringeValve core must be removedDiminishes messMeasurable injectionTyre sealant application
Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 – 3mm wider than your inner rim width. Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valve
HIGH5 Plant Based Recovery Drink (450g)The HIGH5 Plant Based Recovery Drink (450g) uses a blend of pea protein isolate, brown rice protein and pumpkin protein to repair, rebuild, refuel and rehydrate. Do what you love over and over with an extra spring in your step.With a fresh vegan and vegetarian-friendly formulation, the HIGH5 Plant-Based Recovery Drink now has even more recovery power. Mix it up and drink post-exercise and you'll be maximising your fitness gains in recovery and hitting your training sessions with full commitment every time. HIGH5 uses a high-quality blend of plant proteins to give you 20 grams of protein per serving, repairing and building muscles after the efforts of training. There are also 20 grams of Carbs, topping up low glycogen levels and ensuring you're ready to go hard in your next workout session. The 1:1 carb-to-protein ratio delivers the key macronutrients needed post-exercise.Additional minerals and vitamins further enhance the formulation, supporting your immune system while key electrolytes also provide an important component of rehydrating. Directions for UseRecovery Drink mixes easily with water or milk substitutes such as coconut, soy or rice milk. Consume one serving of Protein Recovery in the first hour after hard exercise. You can also take another one or two servings later in the day or just before you go to bed.Nutritional Information Chocolate Per 100gPer ServingEnergy (kj) 1541770Energy (kCal) 364182Fat (g) 3.51.8of Which Saturates (g) 0.90.5Carbohydrates (g) 4322of Which Sugars (g) 2211Protein (g) 4020Salt (g) 2.71.5Magnesium (mg) 11357Calcium (g) 240120Iron (mg) 4.22.1Zinc (mg) 42Vitamin B6 (mg) 0.420.21Vitamin B12 (µg) 52.5Vitamin C (mg) 400200Vitamin D (µg) 1.50.75IngredientsChocolate: Pea Protein Isolate, Maltodextrin, Sucrose, Cocoa powder, Brown rice protein, Pumpkin protein, Thickener (Cellulose gum), Sea salt, Natural flavourings, Magnesium citrate, Calcium carbonate, Vitamin C, Potassium chloride, Digestive enzyme complex (Alpha-amylase, Neutral protease, Cellulose, Lactase, Lipase, Sweetener (Sucralose), Iron Bisglycinate, Zinc Bisglycinate, Vitamin D3, Vitamin D12, Vitamin B6.Allergen Information: For allergen information see ingredients in bold. May contain traces of Gluten, Egg and/or Milk.FeaturesThe plant-based protein blend is the best combination to provide all 9 essential amino acidsAlso contains a digestive enzyme complex to help break down carbohydrates, cellulose fibres, fats and protein20g Protein (per serving) to help maintain and grow muscles20g Carbohydrate (per serving) to help muscles recover after exercise4x electrolytes to aid rehydration, plus zinc, iron, vitamins C, D and BSupports the immune systemNatural flavoursSuitable for Vegetarians: YESSuitable for Vegans: YESBuy HIGH5 Hydration from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tubeless MTB Rim Tape (10m)This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails. One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. We recommend using a tape which is 2 - 3mm wider than your inner rim width Instructions for Use Remove any old tape and sealant residue Ensure rim is clean and dry Start opposite the valve hole and maintain tension as you apply tape Work air bubbles out as you tape the wheel (Push them out via the spoke holes) Apply one layer of tape with a 4" overlap Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim Pierce a small hole and insert your valveFeatures: Length: 10m Suitability: Downhill, Enduro Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Maxxis Flyweight Road Inner TubeThe Maxxis Flyweight Road Inner Tube is the lightest tube available. Designed primarily for racing, the reduced weight keeps rolling resistance to a minimum, increasing speed and acceleration.Features: 0.45 mm thin walls Maxxis rim strip includedBuy Maxxis Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Birzman Tubeless Repair Kit makes puncture repair quick and easy. The CO2 cartridge shaped kit has a durable and compact design, with the cartridge shape including threads for storage of your inflator head. It also makes it compatible with Birzman's range of handy CO2 canister mounts. Should you puncture out on the trail and the puncture is too large for the tubeless sealant to be effective, the cleaning file and insertion tool make for easy plugging of the hole with a tyre plug, ten of which are included. If you find yourself with a punctured tubeless tyre, the Birzman Tubeless Repair Kit is here to the rescue!
The DT Armor is a frame protection against impact and stones kicked-up against the bike. Easy to install with a powerful adhesive, it resists to ripping, UV light and temperature fluctuations. The DT Armor is perfect for cyclists keen to protect their bike frame efficiently and discretely thanks to it being universal and large in size. Dimensions: 70 x 450mm,Colour: Black,Material: PU,Mounting: Rubber clamp,Weight: 48g,.
This durable and dependable Nukeproof tubeless tape has been tested by its in-house team and athletes to ensure a firm and effective seal. Made to meet the demands of downhill and enduro racing, it does a sterling job in keeping your tubes protected as you take on the most daring descents and trails.One 10-metre roll will be enough tape to cater for 4x 29” wheels. One layer with a 4” overlap is all that is required to tape your wheel for tubeless setup. Instructions for Use: Remove any old tape and sealant residue,Ensure rim is clean and dry,Start opposite the valve hole and maintain tension as you apply tape,Work air bubbles out as you tape the wheel (Push them out via the spoke holes),Apply one layer of tape with a 4" overlap,Ensure all air bubbles have been removed and tape is fully stuck right out to the edges of the rim,Pierce a small hole and insert your valve,.Features:Length: 10mSuitability: Downhill, Enduro