Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it.Available in 12x Chris King coloursQuick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the forkWith no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible, so it doesn't widen the size of the - hole already thereFork made from 316 stainless steelBody made from anodised 6061 aluminiumKnurled body and ribbed lid / handle for extra gripWeather sealing O-rings make the tool waterproof when assembledEach kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugsMade from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn't widen the size of the hole already there.Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn't have any issues gripping the tool, even in the muddiest of conditions.Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags.
The Birzman Belly B Top Tube Bag is a brilliantly sized and conveniently placed carrier that puts your nutrition, energy bars and other essentials front and centre for when you require a much need energy boost on your ride. Material: 300D Polyester (water repellent)Size: 18 x 8 x 4.5cmAttaching to your top tube via an adjustable Velcro mounting strap, the Belly B Top Tube Bag is big enough to hold energy bars and gels, but is small enough not to get in the way. Constructed from a water-repellent polyester fabric, it will keep the contents bone dry in any weather. Featuring a roll down closure for easy opening and open side pocket with reflective Birzman logo detail for quick access to your mobile or snacks, the Belly B also has a rain cover for additional protection from rainfall.
Stans No Tubes Universal Tubeless Valves (Pair)Weighing half as much as Stan’s brass version, these alloy tubeless valves are the ideal choice to pair up with your tubeless ready Stan’s BST or BST-R mountain bike rims. Also compatible with many other rims on the market, their removable core simplifies the process of setting up your tubeless wheels.Reasons to Buy: Lightweight. Easy setup.Features: Pack of two Removable core for easy inflation Includes cap and nut Weight: (each) 35mm: 8g; 44mm: 9g; 55mm: 10gFits Most Tubeless Wheels/Rims, including: Stan's NOTUBES ZTR rims &wheels Sun-Ringle wheels featuring NOTUBES BST WTB TCS rims & wheels UST wheels including crankbrothers, Fulcrum, Mavic, Shimano Bontrager Tubeless Ready rims & wheels with Bontrager's Tubeless Ready rim stripInstallation:Remove included valve cap and nut, insert valve through rim, thread nut on to valve and tighten by hand.Buy Stans No Tubes Joe's Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zefal Console T2 Top Tube Bike BagTake all your essentials with you on your next adventure, thanks to this handy Top Tube Bike Bag from Zefal. This bag benefits from a 1.3 litre capacity and there is an internal compartment that is ideal for storing your everyday essentials. It attaches easily to your bike's top tube thanks to its self-gripping straps and is suitable for use with all sizes and styles of bike frames. What's more, it benefits from a front touch screen panel so you can use your smartphone and apps when on the go. Features:Material: Polyester 420D TPUDimensions: 205 x 95 x 110mmType: Frame bag, top tube mountedMounting: Universal using self-gripping strapsCapacity: 1.3 LZip: Water repellent zipMaximum phone size: 175 x 85mmUse: Road, Gravel, CommutingWeight: 200gBuy Zefal Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Can be used with Stans ZTR rims to make them air tight or used as a light weight rim tape in any rimFeatures:10 yards of tape will do a estimated 10 rims60 yards of tape will do a estimated 60 rims.21mm width fits our following rims:ZTR OlympicZTR 355ZTR AlpineZTR CrestZTR Alpha 340Most road clincher rims.25mm width fits our following rims:ZTR 355 (26er, 650b, 29er)ZTR CrestZTR ArchZTR Flow.
The Tubeless Valves V2 from Muc-Off are now stronger and lighter and they are now even easier to use with the introduction of a new machined six slot channel in the base that allow the tyre to be inflated with ease and they can also be used with most tubeless tyre foam inserts. The aluminium used to make these valves has been upgraded to aircraft grade 7075which makes them lighter and stronger than before. They come with 3 sets of different shaped rubber inserts to fit a variety of rim shapes and create the perfect value to rim seal. Available in 10 eye-popping colours and three sizes - 44mm, 60mm & 80mm - well suited for both Road and MTB.7075 Aluminium machined stem 7075 Aluminium machined cap4mm machined Allen Key slot for easy installation / removalIncludes Valve Core Removal Tool (integrated into spare alloy cap)Supplied with various rubber bases to optimise fit with multiple rim typesAssortment of 10 eye-popping coloursAvailable in 3 different sizes - 44mm, 60mm or 80mmSuitable for Presta Valves only
The Tubeless Valves V2 from Muc-Off are now stronger and lighter and they are now even easier to use with the introduction of a new machined six slot channel in the base that allow the tyre to be inflated with ease and they can also be used with most tubeless tyre foam inserts. The aluminium used to make these valves has been upgraded to aircraft grade 7075which makes them lighter and stronger than before. They come with 3 sets of different shaped rubber inserts to fit a variety of rim shapes and create the perfect value to rim seal. Available in 10 eye-popping colours and three sizes - 44mm, 60mm & 80mm - well suited for both Road and MTB.7075 Aluminium machined stem 7075 Aluminium machined cap4mm machined Allen Key slot for easy installation / removalIncludes Valve Core Removal Tool (integrated into spare alloy cap)Supplied with various rubber bases to optimise fit with multiple rim typesAssortment of 10 eye-popping coloursAvailable in 3 different sizes - 44mm, 60mm or 80mmSuitable for Presta Valves only
The Tubeless Valves V2 from Muc-Off are now stronger and lighter and they are now even easier to use with the introduction of a new machined six slot channel in the base that allow the tyre to be inflated with ease and they can also be used with most tubeless tyre foam inserts. The aluminium used to make these valves has been upgraded to aircraft grade 7075which makes them lighter and stronger than before. They come with 3 sets of different shaped rubber inserts to fit a variety of rim shapes and create the perfect value to rim seal. Available in 10 eye-popping colours and three sizes - 44mm, 60mm & 80mm - well suited for both Road and MTB.7075 Aluminium machined stem 7075 Aluminium machined cap4mm machined Allen Key slot for easy installation / removalIncludes Valve Core Removal Tool (integrated into spare alloy cap)Supplied with various rubber bases to optimise fit with multiple rim typesAssortment of 10 eye-popping coloursAvailable in 3 different sizes - 44mm, 60mm or 80mmSuitable for Presta Valves only