The platform now has increased leading and trailing edge height with knurled traction patches above the axle body to increase overall traction. Along with this, an updated pin layout will ensure the rider’s foot remains ‘planted’ on the pedal to provide improved grip and performance. Light and Tough Flat Pedals These Neutron Evo Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair. Durable and Grippy Built using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip. Installation is done using an 8mm hex key. Click here for a Step by Step Installation Guide Spares Available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap
Nukeproof Neutron V1 MTB Freehub Body (Shimano)This Nukeproof Neutron Freehub Body is a genuine, high quality replacement steel cassette body that is compatible with Shimano 9, 10 and 11-speed cassettes.Features: Material: Steel Pawl: 3-Pawl for 142 / 148mm, 4-Pawl for 150mm Hub Compatibility: Neutron 142mm/148mm and 150mm options available Cassette Compatibility: Shimano 9, 10, 11-speed Points of Engagement: 33Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vision Metron 5D ACR Computer MountThis computer mount is specifically designed for use with the Vision 5D ACR Integrated handlebar. It includes all of the necessary mounting hardware, so you can easily mount it to your handlebar and bring your bike computer with you on your travels.Vision ACR SystemThe Vision ACR System is a fully integrated Aerodynamic Cable Routing solution that routes all cables, wires and hoses internally. This innovative patent-pending system is unique to Vision and is a combination of the brand's knowledge bases in both headset and cockpit development and manufacturing plus our history in aerodynamic development and design. The result is a clean, integrated and aerodynamic cable routing solution for frame and bicycle brands.Vision Metron 5D ACR Integrated Handlebar CompatibleThis computer mount is only compatible with the Vision Metron 5D ACR Integrated Handlebar. Metron 5D integrated handlebar, the stiffest and most aero integrated handlebar and stem system from Vision. Mixing aerodynamics and ergonomics, the unique shape includes our Aero-Ergo central section. With a slight rise from the stem clamp and a 10 degree forward bend, the 5D accommodates the natural position of your arms for more comfort and easier breathing, while the wing-like shape of the bar top aids aerodynamics. Reinforced carbon fibre construction gives a great strength-to-weight ratio. The 5D features internal cable routing, with guides that accommodate wiring for electronic shifting. Now available with the ACR System, a fully integrated Aerodynamic Cable Routing solution that routes all cables, wires, and hoses internally.Features: Use: Road Type: Computer Mount Compatibility: Vision Metron 5D ACR Integrated Handlebar Manufacturer's Part Number: 670-0258000110Buy Vision Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Safety Resistance Trainer can be used in a multitude of ways with TPR handles that ensure a comfortable grip and allows for door attachment. The band allows you to stretch and train multiple parts of your body and is easy to use in the home or at the gym. The trainer’s tube is formed with Latex which is held inside a nylon protection sleeve.
Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ProBikeKit have partnered with Welsh-based cycling artist Little James Arnold to produce a range of t-shirts celebrating 'cycling icons', exclusively available from ProBikeKit. James is a graphic designer and illustrator who likes cheese and pickle sandwiches, cycling along country lanes, feeding garden birds and starting small fires. James has been producing cycling artwork since early 2019, gaining fans across the world with his unique cycling animations, celebrating key race moments throughout the year. 25% from each t-shirt sold will be donated to World Bicycle Relief by ProBikeKit. World Bicycle Relief empowers people and communities through life-changing bicycles. They are committed to helping people conquer the challenge of distance, achieve independence and thrive. Your purchase will allow World Bicycle Relief to change more lives.Product Care:Wash at 30 DegreesWash inside outWash with similar coloursProduct Details:Short SleevedWomen's shaped fitAvailable from Women's XS-XXLAll our garments are a stylish shaped geared towards a women's fit.However, if you would prefer to have a looser, more casual fit, just grab a size up instead.
ProBikeKit have partnered with Welsh-based cycling artist Little James Arnold to produce a range of prints celebrating 'cycling icons', exclusively available from ProBikeKit.James is a graphic designer and illustrator who likes cheese and pickle sandwiches, cycling along country lanes, feeding garden birds and starting small fires. James has been producing cycling artwork since early 2019, gaining fans across the world with his unique cycling animations, celebrating key race moments throughout the year.Grab one of our outstanding Giclee prints today, produced on 300 gsm premium soft cotton paper, these prints are of the highest quality. Our prints come hand rolled to ensure quality is maintained in the finished product, ready for display in a room or location of your choosing. These digital prints are produced on high-quality art paper with a fine detail digital print to give incredible clarity and finish in the final design.Features:Printed on Bright White Cotton Fine Art 300gsm PaperAvailable in A4, A3, A2 sizesMagnetic Hanger Frames and Full Frames availableFrames come with a clear perspex cover to protect your chosen art print.
ProBikeKit have partnered with Welsh-based cycling artist Little James Arnold to produce a range of t-shirts celebrating 'cycling icons', exclusively available from ProBikeKit. James is a graphic designer and illustrator who likes cheese and pickle sandwiches, cycling along country lanes, feeding garden birds and starting small fires. James has been producing cycling artwork since early 2019, gaining fans across the world with his unique cycling animations, celebrating key race moments throughout the year. 25% from each t-shirt sold will be donated to World Bicycle Relief by ProBikeKit. World Bicycle Relief empowers people and communities through life-changing bicycles. They are committed to helping people conquer the challenge of distance, achieve independence and thrive. Your purchase will allow World Bicycle Relief to change more lives.Product Care:Wash at 30 DegreesWash inside outWash with similar coloursProduct Details:Short SleevedWomen's shaped fitAvailable from Women's XS-XXLAll our garments are a stylish shaped geared towards a women's fit.However, if you would prefer to have a looser, more casual fit, just grab a size up instead.
ProBikeKit have partnered with Welsh-based cycling artist Little James Arnold to produce a range of t-shirts celebrating 'cycling icons', exclusively available from ProBikeKit. James is a graphic designer and illustrator who likes cheese and pickle sandwiches, cycling along country lanes, feeding garden birds and starting small fires. James has been producing cycling artwork since early 2019, gaining fans across the world with his unique cycling animations, celebrating key race moments throughout the year. 25% from each t-shirt sold will be donated to World Bicycle Relief by ProBikeKit. World Bicycle Relief empowers people and communities through life-changing bicycles. They are committed to helping people conquer the challenge of distance, achieve independence and thrive. Your purchase will allow World Bicycle Relief to change more lives.Product Care:Wash at 30 DegreesWash inside outWash with similar coloursProduct Details:Short SleevedWomen's shaped fitAvailable from Women's XS-XXLAll our garments are a stylish shaped geared towards a women's fit.However, if you would prefer to have a looser, more casual fit, just grab a size up instead.
ProBikeKit have partnered with Welsh-based cycling artist Little James Arnold to produce a range of t-shirts celebrating 'cycling icons', exclusively available from ProBikeKit. James is a graphic designer and illustrator who likes cheese and pickle sandwiches, cycling along country lanes, feeding garden birds and starting small fires. James has been producing cycling artwork since early 2019, gaining fans across the world with his unique cycling animations, celebrating key race moments throughout the year. 25% from each t-shirt sold will be donated to World Bicycle Relief by ProBikeKit. World Bicycle Relief empowers people and communities through life-changing bicycles. They are committed to helping people conquer the challenge of distance, achieve independence and thrive. Your purchase will allow World Bicycle Relief to change more lives.We've pulled the best imagery together to produce a range of products specially designed for this range. Produced in-house on a Black T-Shirt at 100% Cotton, every finished item is carefully crafted to bring you the best result.Product Care: Wash with similar colours Wash at 30 degrees Wash inside out Product Fit: Short Sleeved Classic regular fit Sizes XS-XXL All our garments are sized to fit just right, but we know sometimes a baggier fit just feels better - if that's the case, just grab a size up.