SRAM GX 10 Speed MTB Trigger Gear ShiftersThe GX 2x10 trigger shifters feature an aluminium lever, resulting in minimal weight with maximum durability. Pair the GX 2x10 trigger shifters with the MatchMaker clamp to streamline your handlebar setup.The GX trigger shifters maintain the legacy of X0 shifting with features and technologies optimized for 2x10 and Exact Actuation.When we launched our road technology from scratch we reapplied our MTB proven SRAM 1:1 actuation ratio (shifter cable travel:derailleur movement) for 10 speed rear shifting. Exact Actuation helps to simplify/stabilize the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.Save weight and clutter on the bar with MatchMaker. This system holds Avid levers, a number of SRAM triggers and RockShox PushLoc controls - all with one tidy, light clamp.Features: Weight: 246g (per pair) Speeds: 2x10 Compatibility: Exact Actuation Recommended Group: GX 2x10 Technology Highlight: Exact Actuation, MatchMaker Compatible Material: Aluminium Pull LeverBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X5 10 Speed Trigger ShifterEnjoy high-quality shifting with the X5 10 Speed Trigger Shifter from SRAM. Made from lightweight and sturdy aluminium, the X5 has been through its paces and is World Cup Downhill (DH) proven. The ideal addition for accurate and dependent shifting power you can rely on. Features:Material: Aluminium Composite ComponentsHardware: Stainless Steel, 5mm HexTechnology: Exact ActuationCompatibility: SRAM Exact Actuation Rear Derailleurs, SRAM Double and Triple Front DerailleursSpeed: 10 Speed, 9 SpeedWeight: 125gPart No: SL-X5-A1Technologies:Exact Actuation™ (EA): When SRAM launched its road technology from scratch it reapplied its mountain bike (MTB) proven SRAM 1:1 actuation ratio (shifter cable travel: derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilise the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike
SRAM X4 8 Speed Trigger Gear ShifterSetting the bar high, this 8 Speed Trigger Gear Shifter from SRAM offers smooth and precise shifting control in all terrains and weather conditions. Using the same technology as some of SRAM’s higher-specification models, but at a lower price point, this is the ideal addition to your mountain bike (MTB).Features:Use: MTBShifters: SRAM X4Compatibility: SRAM 1:1® rear derailleurs, SRAM or Shimano® front derailleursSpeed: 8 speedWeight: 265g (pair)Technologies:1:1®: This actuation is superior by design. Every unit of cable you pull moves the derailleur the same amount. Actuation stays precise and fluid slogging through mud, bouncing off rocks, rutting through roots wherever you find yourself, whatever conditions you're in. It's dependable. Tolerant. Easiest to set up. Easiest to adjust. And, not coincidentally, the top choice of the top MTB riders.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X0 10 Speed MTB Trigger Gear ShifterNew smaller design with adjustable pull lever. SRAM’s xact Actuation for precise and dependable 10-speed performance. The first patented multi-adjustable trigger shifter which allows for precise rider fit. MatchMaker X compatible.Features: Speed: 2x10 Compatibility: Exact Actuation RD (XX, X0 10) SRAM FD Technology Highlights: Exact Actuation Weight: 232g (per pair)Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X0 10 Speed MTB Trigger Gear ShifterNew smaller design with adjustable pull lever. SRAM’s xact Actuation for precise and dependable 10-speed performance. The first patented multi-adjustable trigger shifter which allows for precise rider fit. MatchMaker X compatible.Features: Speed: 2x10 Compatibility: Exact Actuation RD (XX, X0 10) SRAM FD Technology Highlights: Exact Actuation Weight: 232g (per pair)Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Apex 10 Speed Road ShiftersThe new Apex Shifter, like every SRAM road group, features the proprietary DoubleTap technology, which offers benefits such as independent “reach adjust” for both shift and brake levers.The Apex shiftlever utilizes a single lever for shifting and a dedicated lever for braking. All of these mechanical features are packaged in an exceptionally light 344g package, and features no external cables to maximize aerodynamics and provide a sleek look.Features: Proprietary DoubleTap technology delivers smooth up- and downshifts in one motion Ergonomic design is comfortable, aerodynamic, and hides all cables, while weighing only 344g High pivot brake lever with reach adjust Weight: 344g Pair Technology Highlight: Doubletap Finish: Sleek, Jet Black Gloss Material: Forged Aluminum Brake Lever, Cast Aluminum Shift Lever Adjustments: Dual Reach Adjust Other: Dual Cable Routing, High Pivot Brake LeverBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X1 11 Speed Trigger ShifterCompatible with SRAM’s entire 1x11 speed mountain bike (MTB) range, this X1 Trigger Shifter adopts X-Actuation™ and ZeroLoss™ technologies to bring you lightning-fast shifts that are consistent and reliable. This means as you are powering up to speed on the trails or preparing for a tough climb, you’ll be able to quickly engage the gear you need for efficient pedalling. Race-proven and boasting a tough forged aluminium lever, this component brings you the same performance that the pros enjoy.Features:Material: Aluminum cover, forged aluminium pull leverSpeed: 11-SpeedCompatibility: X-Actuation™ 11-Speed SRAM mountain bike (MTB) rear derailleursRecommended Group: SRAM X1Use: MTBPair or Single: Single (rear shifter only)Clamp Type: Discrete round handlebar clamp, compatible with all standard 22.2mm barsTechnology Highlight(s): X-Actuation™, ZeroLoss™, MatchMaker™ X IntegratedPrecise and dependable 11-Speed performanceZero Loss Engagement for fastest shiftingMatchMaker X compatible (for combining with brake levers/dropper seatpost remotes)Manufacturer's Part Number: SL-X-11-A1Weight: 121g (w/o clamp)Technologies:X-Actuation™ - Developed specifically for SRAM 1x drivetrains, X-Actuation keeps shifting sharp and consistent across the entire 10-42 tooth cassetteZeroLoss™ - ZeroLoss simply means, well, zero loss - when you push on the lever, for an upshift or downshift, the cable is engaged instantly - zero loss of movement. There is no middle ground where you're waiting for the shift to come. Gear changes are instant and preciseMatchMaker X Integrated - The MatchMaker X clamp is more than just a clamp. Since each clamp accepts up to three controls, you can put everything from your XLoc suspension lockout, your SRAM shifters and AVID brake levers as well as your Reverb XLoc remote, all on two clamps. Short of genetically engineering longer thumbs, it’s the ideal way to put everything within easy reachBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X01 11 Speed MTB Trigger Gear ShifterThere's not much to report on the new SRAM X01 shifter; all the pertinent technologies carry over from XX1. The X01 trigger uses the same cable pull and has the same ZERO LOSS design, allowing you to fire off successive shifts with ease. The X01 shifters are also MatchMaker X compatible.The primary difference is that the XX1 shifter has a carbon cover, while the X01 version uses an aluminum shield that allows access to the shift cable and other internals. Claimed weight for the X01 trigger shifter is 91g.Features: SRAM 1X X-ACTUATION for precise and dependable 11-speed performanceZero Loss Engagement for fastest shiftingMulti-adjustable trigger shifterMatchMaker X compatibleAluminum cover and adjustable forged aluminum pull leverIncludes discrete clampWeight: 91gSpeeds; 11-speedCompatibility: 1X11 X-ACTUATIONRecommended Group: X01Technology Highlight(s): X-ACTUATION, ZERO LOSS, MatchMaker X IntegratedMaterial: Aluminum cover, adjustable forged aluminum pull leverFront Shifting: Aluminum, stainlessMatchMaker X Integrated: The MatchMaker X clamp is more than just a clamp. It's like having Martha Stewart tidy up your cockpit. Since each clamp accepts up to three controls, you can put everything from your XLoc suspension lockout, your SRAM shifters and AVID brake levers as well as your Reverb XLoc remote, all on two clamps. Short of genetically engineering longer thumbs, it's the ideal way to put everything within easy reach. Just like Martha wouldX-Actuation: Developed specifically for SRAM XX1, X-ACTUATION keeps shifting sharp and consistent across the entyre 10-42T cassetteZero Loss Travel: You shift, your bike responds — instantly. Welcome to Zero Loss Travel. No "lost" travel before the cable engages the shifting pawl. No lost momentum. No lost advantage. No loss, period. Get it in our X0 and X9 triggers, along with a 1:1 actuation ratio and SRAM's constant distance geometry. Don't just shift gears. Shift into higher realm of performanceBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring a tough, yet lightweight construction this SRAM X5 shifter is the go-to choice for a wide range of bike manufacturers. This is because it offers outstanding durability, value for money and the feel of a component twice its price. Technologies: Exact Actuation™: When SRAM launched its road technology from scratch it reapplied its MTB proven SRAM 1:1 actuation ratio (shifter cable travel : derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilise the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.
Hidden beneath your handlebars, the XX1 Eagle X-Actuation trigger shifter is the central control system for the SRAM Eagle drivetrain. With its enhanced trigger feel and the ability to shift effortlessly across 12 gears on the cassette, it is an efficient and joyful experience to use. Durable and Precise 12 Speed MTB Trigger Shifter The SRAM shifters have always offered a direct shifting action from the moment the thumb is pressed to when the chain jumps to the desired sprocket on the cassette. Every new generation of the SRAM line makes this process more precise and direct. The XX1 Eagle shifter takes this a step further and is designed to perform to the same level of efficiency and accuracy when riding the trails in your woods on the day after purchase, as it will at the end of a hardy, unforgiving race season. Technologies: Zero Loss: When you push on the lever for an up shift or down shift, the cable is engaged instantly with zero loss of movement. There is no middle-ground where you're waiting for the shift to come. Gear changes are instant and precise. X-Actuation: Developed specifically for SRAM 1x™, X-ACTUATION™, it keeps shifting sharp and consistent across the entire cassette. The feel when up shifting is a direct shifting motion. When your thumb is at the tip of its shifting stroke, the chain rolls onto the next sprocket seamlessly. Matchmaker X Integrated: The MatchMaker X clamp is more than just a clamp, the Matchmaker X is compatible with all SRAM and AVID cockpit controls including disc brakes, shifters and the XLoc remote for the Reverb dropper seatposts. They can all be mounted to the one clamp, making everything on your handlebars easier to reach.
The SRAM GX shifter maintains the legacy of X0 shifting with features and technologies optimised for 2x10 speed MTB drivetrains and Exact Actuation™ shifting. Technologies: Exact Actuation™ - When SRAM launched its road technology from scratch it reapplied its MTB proven SRAM 1:1 actuation ratio (shifter cable travel:derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilise the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.
New smaller design with adjustable pull lever. SRAM’s xact Actuation™ for precise and dependable 10-speed performance. The first patented multi-adjustable trigger shifter which allows for precise rider fit. MatchMaker X compatible. Weight: 232g (per pair)