Shimano have raised the bar for with the TR9 (TR901) elite triathlon racing shoe. Engineered to allow for rapid transition times, rigid power transfer and righteous comfort, the new TR9 shoe packs in a host of top features to guarantee the best possible performance.Water-resistant microfibre synthetic leather with strategic ventingBreathable 3D mesh breathes great and dries fastT1-quick strap and extra-wide upper opening simplifies and quickens transitionsLightweight, rigid carbon fibre composite sole efficiently transfers powerLarge heel loop is easier to grab, speeding up transitionsWeight: 230g (size 42)The upper part of the shoe is made from water-resistant microfibre synthetic leather, which makes the shoe durable and stretch-resistant, at a very light 230g (size 42). Perforations in the upper provide an air intake and exhaust system, while three-layer ventilation mesh on the upper, allow the feet to breathe and dry post-swim. The anatomical toe cap also allows air intake whilst maintaining rigidity and durability. To help riders make time gains in those all-important transitions, the TR9 features a hook-and-loop velcro T1-Quick Strap, extra-wide collar and off-set Quick Loop on the heel, all of which simplify foot entry and quicken the rider s transition onto and off the bike. On the underside of the shoe you get a lightweight, stiff carbon fibre composite sole which provides huge amounts of power transfer which means no energy will be lost on the pedal stroke.
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
When you convert over to Di2 gearing it is more then just your gearing which you are changing over, it is your whole style of riding. Before you get on your bike however you will need to connect all those cables up and this is exactly what the EW-SD50 electric wires are for. The cables are fully removable and allow you to get the correct lengths of cable to run between the indicator junction box or wireless units. The cables are fully water resistant and can be routed through the frame.
When you convert over to Di2 gearing it is more then just your gearing which you are changing over, it is your whole style of riding. Before you get on your bike however you will need to connect all those cables up and this is exactly what the EW-SD50 electric wires are for. The cables are fully removable and allow you to get the correct lengths of cable to run between the indicator junction box or wireless units. The cables are fully water resistant and can be routed through the frame.
When you convert over to Di2 gearing it is more then just your gearing which you are changing over, it is your whole style of riding. Before you get on your bike however you will need to connect all those cables up and this is exactly what the EW-SD50 electric wires are for. The cables are fully removable and allow you to get the correct lengths of cable to run between the indicator junction box or wireless units. The cables are fully water resistant and can be routed through the frame.
When you convert over to Di2 gearing it is more then just your gearing which you are changing over, it is your whole style of riding. Before you get on your bike however you will need to connect all those cables up and this is exactly what the EW-SD50 electric wires are for. The cables are fully removable and allow you to get the correct lengths of cable to run between the indicator junction box or wireless units. The cables are fully water resistant and can be routed through the frame.
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors