Tadej Pogačar Special Edition We've all seen Tadej Pogačar's audacious attacks at the Classics and Tours. And it's the tufts of hair poking out of his Trenta 3K Carbon Road Helmet (MIPS) that have become an instant trademark, visible as he powers away from the pack. This special edition Trenta gets a sparkly iridescent finish and special-edition logos, making it an instant winner, just like Tadej. Elite Performance The Trenta 3K Carbon has been engineered to give you the finest levels of head protection as well as energy-saving aerodynamics and incredible levels of cooling. When you're attacking from the peloton, just like Tadej, this ensures you're the freshest in the bunch. MIPS AIR® Technology The MIPS (Multi-directional Impact Protection System) AIR® Technology is an advanced head protection system integrated into the helmet's padding system. This gives the lightest version of this outstanding rotational management system. The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head. Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head. Shop All MIPS Helmets Click Here 3K Carbon Technology When it comes to lightweight protection, the MET R&D team have taken advantage of the properties of 3K Carbon. A carbon cage is embedded into the helmet, boosting protection levels while not adding weight. The carbon’s elastic modulus has been taken advantage of, allowing a reduction in the density of the EPS foam by 20% but maintaining the very best level of impact absorption. This gives you a super-light and highly ventilated helmet with no compromise to safety levels. Safe. Fast. And Cool. The Trenta Carbon has been engineered to be both slippery through the air and to optimise air cooling. Starting with the airflow, the front vents harness the power of the Venturi effect. This has the effect of actively drawing in air and pushing warm air out through the rear exhaust vents. This turbo-charged airflow is also achieved without inducing excess drag. To the back, the tail of the helmet also works for a specific aerodynamic purpose. Working in synergy with the NACA front vent, the tail design drives airflow for constant cooling. The tube-shaped tail and internal channelling also mean you benefit from up to 7% less drag compared to a more traditional road helmet. Less drag. Less energy wasted. More energy when going for the win. Safe-T Orbital Fit The Trenta Carbon also features MET's most adjustable fit system yet, the Safe-T Orbital. This allows two-step occipital adjustment, four-step vertical adjustment and a micrometrical dial that allows you to fine-tune the fit for all-day riding comfort.
The MET Trenta 3K Carbon Mips® is a high performance road helmet designed with elite cyclists and worn to victory at Le Tour de France and the monuments of Liège-Bastogne-Liège and Il Lombardia. Engineered to keep your head fresh and save you energy with every pedal stroke, the MET Trenta 3K Carbon Mips® is the most advanced road cycling helmet we have ever made, now upgraded with the addition of Mips AIR®, the lightest and most advanced rotational management system.
The MET Trenta 3K Carbon Mips® is a high performance road helmet designed with elite cyclists and worn to victory at Le Tour de France and the monuments of Liège-Bastogne-Liège and Il Lombardia. Engineered to keep your head fresh and save you energy with every pedal stroke, the MET Trenta 3K Carbon Mips® is the most advanced road cycling helmet we have ever made, now upgraded with the addition of Mips AIR®, the lightest and most advanced rotational management system.
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningStraight pull spoke design builds into a lighter, stiff wheel with stronger spokesAvailable in a range of fitments to suit almost any bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather!The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
DT Swiss 240 hubs need no introduction. Look up reliability in the dictionary and you'll see a picture of the 240! The latest 240 EXP hubs are better than ever; lighter, smoother and just as cool and reliable as they always have been!EXP Ratchet is lighter, even more reliable and offers fast pickup with 36 points of engagementLightweight aluminium hub shell builds into a strong, stiff wheelMachined construction is super light yet strong enough to last for years under the hardest ridersCustom made DT steel bearings offer incredible durability and silky smooth runningStraight pull spoke design builds into a lighter, stiff wheel with stronger spokesAvailable in a range of fitments to suit almost any bikeDT Swiss 240 hubs are some of the nicest finished, smoothest rolling and most durable around. Firstly, every part of the hub, from the aluminium shell right down to the end caps are machined to make them as light as possible while retaining enough strength to give years of reliable service. They then spin on bearings custom made for DT Swiss that provide incredibly smooth and drag free running as well as supremely long life; these hubs will just keep on turning, no matter what the weather!The 240 EXP uses the DT's new Ratchet EXP, an even more refined and evolved ratchet drive system. By moving the drive-side hub bearing inside the inner 36 tooth ratchet itself, DT have decreased the number of moving parts whilst giving the bearings a wider stance. The result is a hub that is even more reliable and up to 20% lighter than the previous generation 240 and stiffer to boot with improved bearing alignment and long term durability. The 240 EXP is truly one of the finest hub DT has ever made. If you want a rear hub that looks great, rolls smoothly and will give you years of reliable service, look no further than the DT Swiss 240!
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)
The 20Five RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross disc specific rim built onto Hope s RS4 Straight Pull Centre Lock Disc hub. They are tubeless compatible, although this does require tape and valves. The 6061 T6 aluminium construction features a strong and dependable welded join, designed to keep the rim together on hard knocks. The straight pull double butted Sapim Sprint spokes are made of stainless steel and the nipples are brass. The wheels can be adapted quickly and easily to suit different frame and fork fittings using Cube s conversion kits, available separately. Comes supplied with QR and 142x12 end caps as standard. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Road Hub is the perfect combination of light weight and durability, and now the most versatile and serviceable hub on the planet is available with centre lock. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. Available in a wide variety of colours as well as multiple spoke hole options, allowing you to build your perfect wheelset.Rim: 20FiveRim Type: Welded Join 6061 T6 Aluminium / Tubeless Compatible (Requires Tape and Valves)Rim Dimensions: 25mm Deep / 20mm Internal Width / 24mm External WidthRim ERD 594mmHub: RS4 Straight pull centre lock 24 holeFreehub: Shimano / SRAM compatibleStainless steel, sealed cartridge bearingsSpokes: Sapim sprint straight pull stainless steel double butted with brass nipplesWheel size: 700cOnly compatible with disc brake set upsComes supplied with QR and 142x12 end capsApprox. Weight: 425g (Rim only) 895g (Complete wheel)