Campagnolo Power Torque BB386 Bottom Bracket CupsAs the name suggests, these replacement Campagnolo Power Torque BB386 Bottom Bracket Cups are compatible with frames that have a BB386 (86.5x46mm) bottom bracket shell and are for use with Campagnolo's Power Torque range of chainsets. The extra width of the BB386 bottom bracket combined with the oversized Power Torque spindle provides unsurpassed levels of stiffness for superior power transfer.Features: Material: AlloyFrame Compatibility: BB386 - 86.5x46mm onlySpindle Compatibility: Campagnolo Power Torque onlyPlease Note: Replacement cups only, no bearings suppliedBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
In 2007 the revolutionary Ultra Torque bottom bracket technology was introduced. Now in 2011 the mid-range groups are even more affordable - still with the same high level performance features.Ladies and gentlemen, meet Power Torque System. The new single-piece axle is firmly fixed to the right pedal crank. The coupling between central pin and crank is perfect. This technical development makes it possible to eliminate any potential play.To make the bottom bracket more efficient an elaborate sequence of thicknesses iks introduced. The axle is incredibly light while still offering an absolute response in terms of rigidity. Thanks to the studies conducted by the Campy Tech Lab engineers, material was removed in the zones that could be lightened but at the same time the points of maximum stress were strengthened. Only in this way was it possible to achieve such a high technical value.A careful working out of the dimensions made it possible to maintain the lateral measurements already defined with the "elder brother" Ultra Torque, thus guaranteeing the maximum freedom of movement and reducing the possibility of contact with shoes. The design ensures simple installation and service. There are four simple steps for fitting the crankset quickly and without error. The right-hand bearing is already locked in place; the other is pre-inserted in the left-hand cup. No special tool is required - the new crankset is ready to propel you over endless miles.That's right, because another one of the objectives of the Power Torque System project was prolonged operating resistance. The tests conducted by the Campy Tech Lab were very exacting in this regard. Now it's your turn.
Versatile Mini Torque Wrench Set All tools and tool bits come in a handy roll-up sleeve/saddle pack that lets you conveniently store this Pro Mini Torque Wrench Set under your saddle. There's even room to attach a spare tube! The ratchet tool is easy to use, just connect the required preset torque sleeve and tool bit and tighten. The tool bit will remain stationary once your desired Nm force is achieved, meaning you cannot over tighten the bolt. The double-ended L-bar lets you have two tool bits in one convenient place as you switch between tasks.
LifeLine Pro Torque Set with 4-5-6Nm BitsThe LifeLine Pro Mini Torque Wrench Set is a convenient and versatile tool, is easy to store and features a precise mini-ratchet, L-bar tool, ten high-quality tool bits and 4, 5 & 6 Nm pre-loaded torque sleeves. This Wrench Set ensures you are covered for the majority of Road and Trail side mechanicals.Convenient to Store, Efficient and Precise to UseThis Wrench Set comes supplied in a handy roll-up saddle pack so you can store it for convenient and low-profile storage under your saddle; a spare tube can also fit to the storage sleeve for added convenience. This ratchet tool is simple and efficient to use and all that is required is to connect the required preset torque sleeve, and tool bit and tighten your components securely. The tool bit will remain stationary once your desired Nm force is achieved, meaning you cannot over tighten the bolt. The double-ended L-bar lets you have two tool bits in one convenient place as you switch between tasks.Features: Mini ratchet tool L-bar tool 4,5,6Nm sleeves Roll-up Sleeve/Saddle Pack Hex: 2, 3, 4, 5, 6, 8 and SL4 Bits Torx: T25, T30 Screwdriver: Phillips #1, Flat HeadBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Shop quality, preset torque driver that limits torque applied to fasteners, preventing overtightening and damage to lightweight components, Preset to apply 4 Newton Meter (Nm) of torque when rotating clockwise, All metal internal construction for long life, Comfortable ergonomic composite moulded grip, Includes 3mm, 4mm, 5mm and T25 bits (stored in handle), 1 1/4 inch drive, Magnetic socket retains bits, Assembled and calibrated at the PARK TOOL factory in St. Paul, Minnesota.
This shop quality Preset Torque Driver from Park Tool is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components.Preset to a predetermined torque setting¼ inch hex driveIncludes 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeComfortable ergonomic composite molded gripIncludes 3mm, 4mm, 5mm and T25 bits (stored in handle)With an all metal internal construction and a comfortable ergonomic composite moulded grip you can be sure that this tool is built to last.
This shop quality Preset Torque Driver from Park Tool is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components.Preset to a predetermined torque setting¼ inch hex driveIncludes 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeComfortable ergonomic composite molded gripIncludes 3mm, 4mm, 5mm and T25 bits (stored in handle)With an all metal internal construction and a comfortable ergonomic composite moulded grip you can be sure that this tool is built to last.
This shop quality Preset Torque Driver from Park Tool is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components.Preset to a predetermined torque setting¼ inch hex driveIncludes 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeComfortable ergonomic composite molded gripIncludes 3mm, 4mm, 5mm and T25 bits (stored in handle)With an all metal internal construction and a comfortable ergonomic composite moulded grip you can be sure that this tool is built to last.
An ideal bike tool for home and professional bike mechanics, the Topeak torque wrench dx has an advanced torque limit release design, which consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. The Topeak torque wrench also includes the 5 most popular tool bits, 3,4 & 5mm hex and T20 and T25 Torx. Two of your favourite bits can be carried in the handle of the Nano TorqBar for immediate use and even greater portability during rides.
Topeak Nano TorqBar DX Torque WrenchAn everyday essential for your workshop, this compact TorqBar Torque Wrench from Topeak includes 4,5 and 6Nm torque bits and is so streamlined it can fit in your pocket. Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. Also included are the 5 most popular tool bits, 3,4 & 5mm hex & T20 & T25 Torx. Two of your favourite bits can be carried in the handle of the Nano TorqBar for immediate use and even greater portability during rides.Features:15 FunctionsIntegrated compartment for two bitsCarry caseTorque Value: 4, 5 & 6NmAllen Bits: 3,4 & 5mmTorx Bits: T20 & T25Body: Aluminium / Engineering grade plasticSize: 12x1.6x1.6cmWeight: 62g (Tool w/ 1 Torqbit & 2 bits)Buy Topeak Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
High quality precision torque wrench, a must for all enthusiastsAdjustable from 3 to 15 Nm for most stems, handlebars, seatposts etcIncluding M3, M4, M5, M6, M8, M10 and T25 socketsSmall and easy to use including storage box.
Shop quality preset torque driver that limits torque applied to fasteners preventing overtightening and damage to lightweight componentsEach tool preset to apply either 45 or 6 Newton Meter (Nm) of torque when rotating clockwise depending on model purchasedAll metal internal construction for long lifeComfortable ergonomic composite molded gripIncludes 3mm 4mm 5mm and T25 bits (stored in handle)1 1/4 inch driveMagnetic socket retains bitsAssembled and calibrated at the PARK TOOL factory in St. Paul Minnesota