This shop quality Preset Torque Driver from Park Tool is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components.Preset to a predetermined torque setting¼ inch hex driveIncludes 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeComfortable ergonomic composite molded gripIncludes 3mm, 4mm, 5mm and T25 bits (stored in handle)With an all metal internal construction and a comfortable ergonomic composite moulded grip you can be sure that this tool is built to last.
This shop quality Preset Torque Driver from Park Tool is a great tool for ensuring you apply the correct torque to fasteners helping to prevent over-tightening and damage to components.Preset to a predetermined torque setting¼ inch hex driveIncludes 3, 4, 5mm and T25 bits stored in the handleLimits torque applied to fasteners while rotating clockwiseAll metal internal construction for long lifeComfortable ergonomic composite molded gripIncludes 3mm, 4mm, 5mm and T25 bits (stored in handle)With an all metal internal construction and a comfortable ergonomic composite moulded grip you can be sure that this tool is built to last.
Versatile Mini Torque Wrench Set All tools and tool bits come in a handy roll-up sleeve/saddle pack that lets you conveniently store this Pro Mini Torque Wrench Set under your saddle. There's even room to attach a spare tube! The ratchet tool is easy to use, just connect the required preset torque sleeve and tool bit and tighten. The tool bit will remain stationary once your desired Nm force is achieved, meaning you cannot over tighten the bolt. The double-ended L-bar lets you have two tool bits in one convenient place as you switch between tasks.
LifeLine Pro Torque Set with 4-5-6Nm BitsThe LifeLine Pro Mini Torque Wrench Set is a convenient and versatile tool, is easy to store and features a precise mini-ratchet, L-bar tool, ten high-quality tool bits and 4, 5 & 6 Nm pre-loaded torque sleeves. This Wrench Set ensures you are covered for the majority of Road and Trail side mechanicals.Convenient to Store, Efficient and Precise to UseThis Wrench Set comes supplied in a handy roll-up saddle pack so you can store it for convenient and low-profile storage under your saddle; a spare tube can also fit to the storage sleeve for added convenience. This ratchet tool is simple and efficient to use and all that is required is to connect the required preset torque sleeve, and tool bit and tighten your components securely. The tool bit will remain stationary once your desired Nm force is achieved, meaning you cannot over tighten the bolt. The double-ended L-bar lets you have two tool bits in one convenient place as you switch between tasks.Features: Mini ratchet tool L-bar tool 4,5,6Nm sleeves Roll-up Sleeve/Saddle Pack Hex: 2, 3, 4, 5, 6, 8 and SL4 Bits Torx: T25, T30 Screwdriver: Phillips #1, Flat HeadBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Shop quality, preset torque driver that limits torque applied to fasteners, preventing overtightening and damage to lightweight components, Preset to apply 4 Newton Meter (Nm) of torque when rotating clockwise, All metal internal construction for long life, Comfortable ergonomic composite moulded grip, Includes 3mm, 4mm, 5mm and T25 bits (stored in handle), 1 1/4 inch drive, Magnetic socket retains bits, Assembled and calibrated at the PARK TOOL factory in St. Paul, Minnesota.
Please note that bearing are not included and for 2015 the BB shells no longer have the thin rubber seal inside.
Campagnolo Power Torque BB30 Bottom Bracket CupsGenuine Campagnolo replacement BBC30 bottom bracket cups for use with Athena 11 Speed and Velcoe 10 Speed groupsets using the power torque chainsets.Features:Incredibly lightweightHollow forged aluminium chainsetMulti-shifting technology allows for 3 gear shifting at a time5.5mm chain with anti-friction treatment for outstanding fluidityEmbrace technology for greater drivetrain efficiencyBuy Campagnolo Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Campagnolo Power Torque BB386 Bottom Bracket CupsAs the name suggests, these replacement Campagnolo Power Torque BB386 Bottom Bracket Cups are compatible with frames that have a BB386 (86.5x46mm) bottom bracket shell and are for use with Campagnolo's Power Torque range of chainsets. The extra width of the BB386 bottom bracket combined with the oversized Power Torque spindle provides unsurpassed levels of stiffness for superior power transfer.Features: Material: AlloyFrame Compatibility: BB386 - 86.5x46mm onlySpindle Compatibility: Campagnolo Power Torque onlyPlease Note: Replacement cups only, no bearings suppliedBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
In 2007 the revolutionary Ultra Torque bottom bracket technology was introduced. Now in 2011 the mid-range groups are even more affordable - still with the same high level performance features.Ladies and gentlemen, meet Power Torque System. The new single-piece axle is firmly fixed to the right pedal crank. The coupling between central pin and crank is perfect. This technical development makes it possible to eliminate any potential play.To make the bottom bracket more efficient an elaborate sequence of thicknesses iks introduced. The axle is incredibly light while still offering an absolute response in terms of rigidity. Thanks to the studies conducted by the Campy Tech Lab engineers, material was removed in the zones that could be lightened but at the same time the points of maximum stress were strengthened. Only in this way was it possible to achieve such a high technical value.A careful working out of the dimensions made it possible to maintain the lateral measurements already defined with the "elder brother" Ultra Torque, thus guaranteeing the maximum freedom of movement and reducing the possibility of contact with shoes. The design ensures simple installation and service. There are four simple steps for fitting the crankset quickly and without error. The right-hand bearing is already locked in place; the other is pre-inserted in the left-hand cup. No special tool is required - the new crankset is ready to propel you over endless miles.That's right, because another one of the objectives of the Power Torque System project was prolonged operating resistance. The tests conducted by the Campy Tech Lab were very exacting in this regard. Now it's your turn.
The Birzman M-Torque 10 Multi-tool allows you to take the precision of your torque wrench out on the road or trail! With the perfect selection of tools, you can easily adjust precision components without fear of over tightening.Have the precision of a torque wrench in the body of a multi-toolLightweight and durable aluminium and chromed vanadium constructionFeatures 2/3/4/5/6/8mm hex keys, T25 torx key, flat & crosshead screwdriver and a chain tool for 8-12 speed chainsCompact 93 x 57 x 18mm dimensions and weighs just 170gWith the M-Torque 10 Multi-tool, the precision of a torque wrench is at your fingertips whenever you need it. Your bike is just a reassuring click away from ultimate accuracy. As you tighten a bolt with the 4/5mm hex key or T25 torx key, the force through your thumb pushes on the raised button. When this force reaches 5Nm, the button will give a reassuring click. This click indicates the bolt has been tightened to the correct torque value. The other tools include a 2/3/6/8mm hex keys, flat & crosshead screwdriver and a chain tool for 8-12 speed chains. With a lightweight but durable aluminium body and chromed vanadium tools, the M-Torque 10 Multi-tool weighs just 170g and is designed to last for years to come, requiring no calibration or maintenance to keep going.
Accurate and Easy to use Torque Wrench Applying the correct torque to your cycle components is essential for a safe and serviceable bike. With its 2-24Nm measuring range, this accurate torque wrench helps you ensure that the fittings on your bike are tightened to the correct torque and that clamping forces are distributed evenly across clamping surfaces. Hex Keys and Torx Keys Included This helps prolong the life of high-end components and prevents damage from over-tightening. LifeLine also include 3, 4, 5, 6, 8, 10mm hex heads, T25 and T30 Torx heads, and a 5mm extension bar for reaching concealed bolts. This makes it Ideal for use on stems, seat clamps, lever clamps, chainsets, rotors and headsets.
LifeLine Essential Torque Wrench SetOffering you precise operation at a budget-friendly price, LifeLine's torque wrench and socket set will quickly and accurately assist you when repairing or upgrading your bike. With its wide 2-24 Nm range, you'll be able to maintain and fit a wide range of parts without damaging them or the bike's frame.Accurate Torque Wrench with Torx and Hex SocketsCorrect torque settings are not only just important when installing components, it's important when riding the bike too as it helps to prolong component life and ensure rider safety. An invaluable addition to any bike mechanics toolbox, this kit enables you to occasionally check the bolts to see if any have worked their way loose. Coming complete with all of the most commonly used Torx and Hex head sockets, you’ll be able to fine-tune all of the key components on your bike, quickly, easily and accurately. Right hand thread tightening only.Reasons to Buy: Offers precise operation.Quickly and accurately helps you maintain your bike.2-24 Nm range.Perfect for your home workshop.Features: Essential for correct fitting of high performance cycling components Compatibility: Most of bike's frame and component bolts Precision torque measurement 1/4" Square driver 2-24 Nm torque range 3, 4, 5, 6, 8, 10mm hex heads T25 and T30 Torx heads 5mm hex extension Micrometric adjustment Socket release button Bespoke moulded case Instructions Included Replacement Parts Available Separately: No Case Dimensions: 220mm x 80mm x 6mmBuy from Chain Reaction Cycles, the World's Largest Online Bike Store.