Fox Suspension 38 Float Factory Grip 2 ForkSpecifically designed for enduro riders who want to go big, this Factory Series suspension fork comes feature-packed to exceed the demands of Factory-level riders. Ready for fast enduro rides with a design that's built for speed, this model's genuine Kashima coating on its upper tubes makes it slippery smooth and ultra-durable as you conquer the most demanding of trail conditions. Thanks to its Boost axle spacing, it provides stronger and stiffer performance, while its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC) make it easy to tweak it to match your riding style. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Welcome to the big time.Enduro Fork with GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Enduro, Mountain Bike (MTB) Axle Size: 15QRx110mm Boost Air Spring: Float EVOL Damper: GRIP2 damper with dual Variable Valve Control (VVC) Steerer Diameter: 1.5" tapered (internally elliptical) Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Weight: 2180gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways Fox Suspension has further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not.Manufacturer's Part Numbers: 910-21-031 Black 27.5" QR110 170mm 44mm 910-21-028 Black 27.5" QR110 180mm 44mm 910-21-027 Black 27.5" QR110 180mm 37mm 910-20-201 Orange 27.5" QR110 170mm 44mm 910-21-025 Black 29" QR110 160mm 51mm 910-21-020 Black 29" QR110 180mm 44mm 910-21-024 Black 29" QR110 160mm 44mm 910-21-022 Black 29" QR110 170mm 44mm 910-20-200 Orange 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 38 Float Factory Grip 2 ForkSpecifically designed for enduro riders who want to go big, this Factory Series suspension fork comes feature-packed to exceed the demands of Factory-level riders. Ready for fast enduro rides with a design that's built for speed, this model's genuine Kashima coating on its upper tubes makes it slippery smooth and ultra-durable as you conquer the most demanding of trail conditions. Thanks to its Boost axle spacing, it provides stronger and stiffer performance, while its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC) make it easy to tweak it to match your riding style. Packing the same revolutionary features as the 36 model while redefining what you think a long travel single crown fork is capable of, this enduro fork sets a new benchmark for confidence, performance, and durability. Welcome to the big time.Enduro Fork with GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Float EVOL Air SpringEVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Enduro, Mountain Bike (MTB) Axle Size: 15QRx110mm Boost Air Spring: Float EVOL Damper: GRIP2 damper with dual Variable Valve Control (VVC) Steerer Diameter: 1.5" tapered (internally elliptical) Compatible Rotor Size: 180mm direct Post Mount, up to 230mm compatible Weight: 2180gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38's elliptical steer tube is one of many ways Fox Suspension has further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it's not.Manufacturer's Part Numbers: 910-21-031 Black 27.5" QR110 170mm 44mm 910-21-028 Black 27.5" QR110 180mm 44mm 910-21-027 Black 27.5" QR110 180mm 37mm 910-20-201 Orange 27.5" QR110 170mm 44mm 910-21-025 Black 29" QR110 160mm 51mm 910-21-020 Black 29" QR110 180mm 44mm 910-21-024 Black 29" QR110 160mm 44mm 910-21-022 Black 29" QR110 170mm 44mm 910-20-200 Orange 29" QR110 170mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Carbon FrameThis mountain bike (MTB) frame features an ultra-strong T700/800 monocoque carbon fibre build for excellent stiffness and durability, without weighing down your ride with unnecessary excess grams. Nukeproof has also kitted out this model with a Factory Series Fox Float X rear shock, which delivers smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing that allows you to enjoy trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is an ideal choice of upgrade for completing your full suspension MTB bike build.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre Use: Mountain Bike (MTB) frame Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.5Kgs/7.7lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
This trail-ready full suspension mountain bike (MTB) frame features an ultra-strong monocoque carbon fibre build, which makes it more than capable of handling all the demands associated with all-day epics on the trails. Nukeproof has also kitted out this model with a high-quality Factory Series Fox Float X rear shock that offers excellent smoothness, tuneability and control as you charge across tree roots, rock gardens and debris. Ready for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon Fibre MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 160mm (Comp 150mm) Axle to Crown: 555mm (Comp 545mm) Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 275 Carbon, 140mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro Bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 2 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.6Kgs/7.9lbs (Medium option)
Featuring an ultra-strong T700/800 monocoque carbon fibre construction, this mountain bike (MTB) frame offers fantastic stiffness and durability without weighing down your ride with unnecessary excess grams. Nukeproof has also equipped it with a Factory Series Fox Float X rear shock for smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing, which allows you to benefit from trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is a perfect choice of upgrade for completing your full suspension MTB bike build. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.5Kgs/7.7lbs (Medium option)
Completely redesigned for 2022, Cube took everything that's good about the Kathmandu and made it even better. So, for example, the reworked Integrated Carrier 3.0 is designed to work seamlessly with the Acid mudguard. They fitted a flat mount for the rear disc brake - it also accommodates the kickstand - and used smooth welding to give the frame joints a tidy, organic appearance. But it's not all about looks. Cube also upgraded the rear end to a thru axle and added a tapered head tube for improved rigidity and steering precision, even when fully laden. With internal cable routing to keep your gear shifts smooth with minimal maintenance, they reckon they've thought of everything. Just don't forget your toothbrush.Aluminium Superlite, Trekking Comfort, IC 3.0, Double Butted frameRockShox Paragon Gold Fast Black Fork 65mm travel with lockoutShimano 30-Speed Deore XT drivetrainComes with lights, mudguards integrated with a rear luggage carrierShimano hydraulic disc brakesCycling is a great way to reduce your carbon footprint. With the brand-new Kathmandu SL, Cube have gone the extra mile to use recycled materials wherever possible. So, it features a front light that's made from recycled materials, and mudguards manufactured from recycled PET. It's a small thing, but it's Cube s way of doing what they can. Shimano's XT components are easy to use and the last word in reliable performance. The comfortable, easy-to-adjust Suntour NCX E RL air suspension fork makes long days in the saddle a pleasure. And, with the reworked Integrated Carrier 3.0, mudguards, lighting set and kickstand, Cube have set a new standard for low-impact, low-carbon travel.Size Chart:
Nukeproof Scout 275 Elite Alloy Bike (SLX12)Engineered and equipped for admirable all-terrain performance anywhere on the mountainside, Nukeproof has armed the Scout 275 Elite with superb components aboard the new Scout V3 frame platform. With a custom triple butted hydro-formed alloy frame at its core with tweaked geometry and improved sizing options, the Scout 275 is ideal for singletrack riding, all-mountain adventures and loops of your local bike park. It is also fitted with 140mm-travel Fox Float Rhythm forks, a Shimano SLX 1x12-Speed groupset, hydraulic disc brakes and DT Swiss M1900 Spline wheels wrapped in Tubeless Ready Magic Mary and Hans Dampf tyres from Schwalbe.The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn’t underestimate what this hardtail is truly capable of.The all-new Scout is a graduate from the school of gravity. Its geometry is on the “aggressive” side of the coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof’s Saddle Offset theory, will propel you efficiently up the trail ready for the gnarliest descent you can handle. The new geometry adds to the all-round capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame that is ready to scout out endless single track, session technical enduro trails or just hoon around like you’re auditioning for the latest “Scoutin’ About” video epic.The Nukeproof Scout is the embodiment of the Nukeproof attitude. When riding a Scout, you become part of something special and every ride of this hardcore hardtail rewards every last drop of your skill and commitment. You are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership.The New Scout, welcome to the world of Scoutin’ About, it really is an attitude.The 3rd generation the Scout has been tweaked to be the finest vintage of Scout.Key Upgrades Include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails The all new Nukeproof Scout builds on the cult like “Scoutin’ About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikersFeatures: Frame: Nukeproof Scout 275, custom triple butted hydro-formed Alloy, internal cable routing for dropper seat posts, ISCG 05 mount, threaded 73mm BB, Boost 148mm rear axle spacing, includes 3D Contoured Rubber Frame Protection for Down Tube, Seat Stay and Chain stay Fork: FOX 36 Float Rhythm, 140mm, 44mm Offset, BOOST, Grip Damper, Black Front Wheel: DT Swiss, M1900 Spline, 15x110mm, 6 bolt, 28H Rear Wheel: DT Swiss M1900 Spline, 148x12mm, Shimano Microspline, 6 bolt, 28H Tyres: Front: Schwalbe Magic Mary, Snakeskin, TL Easy, Addix Soft, 27.5x2.6"; Rear: Schwalbe Hans Dampf, Snakeskin, TL Easy, Addix Speedgrip. 27.5x2.6" Crankset: Shimano SLX M7100 12 Speed Crank, 170mm, 32T, 52mm Chainline Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus Chain: Shimano SLX M7100 12-Speed Cassette: Shimano SLX M7100 12-Speed (HYPERGLIDE+), 10-51T Brakes: Shimano SLX M7120 4 pot brake, Metal Pads Front Rotor: Shimano SM-RT66, 203mm Rear Rotor: Shimano SM-RT66, 180mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop Headset: Nukeproof Warhead, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 13.56kgSpecification: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm Axle to Crown: 529mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Max Chainring: 34T (32T Oval) Protection: 3D Contoured Rubber Frame Protection for DT/SS/CSEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Scout 275 Elite Alloy Bike (SLX12)Engineered and equipped for admirable all-terrain performance anywhere on the mountainside, Nukeproof has armed the Scout 275 Elite with superb components aboard the new Scout V3 frame platform. With a custom triple butted hydro-formed alloy frame at its core with tweaked geometry and improved sizing options, the Scout 275 is ideal for singletrack riding, all-mountain adventures and loops of your local bike park. It is also fitted with 140mm-travel Fox Float Rhythm forks, a Shimano SLX 1x12-Speed groupset, hydraulic disc brakes and DT Swiss M1900 Spline wheels wrapped in Tubeless Ready Magic Mary and Hans Dampf tyres from Schwalbe.The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn’t underestimate what this hardtail is truly capable of.The all-new Scout is a graduate from the school of gravity. Its geometry is on the “aggressive” side of the coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof’s Saddle Offset theory, will propel you efficiently up the trail ready for the gnarliest descent you can handle. The new geometry adds to the all-round capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame that is ready to scout out endless single track, session technical enduro trails or just hoon around like you’re auditioning for the latest “Scoutin’ About” video epic.The Nukeproof Scout is the embodiment of the Nukeproof attitude. When riding a Scout, you become part of something special and every ride of this hardcore hardtail rewards every last drop of your skill and commitment. You are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership.The New Scout, welcome to the world of Scoutin’ About, it really is an attitude.The 3rd generation the Scout has been tweaked to be the finest vintage of Scout.Key Upgrades Include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails The all new Nukeproof Scout builds on the cult like “Scoutin’ About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikersFeatures: Frame: Nukeproof Scout 275, custom triple butted hydro-formed Alloy, internal cable routing for dropper seat posts, ISCG 05 mount, threaded 73mm BB, Boost 148mm rear axle spacing, includes 3D Contoured Rubber Frame Protection for Down Tube, Seat Stay and Chain stay Fork: FOX 36 Float Rhythm, 140mm, 44mm Offset, BOOST, Grip Damper, Black Front Wheel: DT Swiss, M1900 Spline, 15x110mm, 6 bolt, 28H Rear Wheel: DT Swiss M1900 Spline, 148x12mm, Shimano Microspline, 6 bolt, 28H Tyres: Front: Schwalbe Magic Mary, Snakeskin, TL Easy, Addix Soft, 27.5x2.6"; Rear: Schwalbe Hans Dampf, Snakeskin, TL Easy, Addix Speedgrip. 27.5x2.6" Crankset: Shimano SLX M7100 12 Speed Crank, 170mm, 32T, 52mm Chainline Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus Chain: Shimano SLX M7100 12-Speed Cassette: Shimano SLX M7100 12-Speed (HYPERGLIDE+), 10-51T Brakes: Shimano SLX M7120 4 pot brake, Metal Pads Front Rotor: Shimano SM-RT66, 203mm Rear Rotor: Shimano SM-RT66, 180mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop Headset: Nukeproof Warhead, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 13.56kgSpecification: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm Axle to Crown: 529mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Max Chainring: 34T (32T Oval) Protection: 3D Contoured Rubber Frame Protection for DT/SS/CSEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Scout 275 Elite Alloy Bike (SLX12)Engineered and equipped for admirable all-terrain performance anywhere on the mountainside, Nukeproof has armed the Scout 275 Elite with superb components aboard the new Scout V3 frame platform. With a custom triple butted hydro-formed alloy frame at its core with tweaked geometry and improved sizing options, the Scout 275 is ideal for singletrack riding, all-mountain adventures and loops of your local bike park. It is also fitted with 140mm-travel Fox Float Rhythm forks, a Shimano SLX 1x12-Speed groupset, hydraulic disc brakes and DT Swiss M1900 Spline wheels wrapped in Tubeless Ready Magic Mary and Hans Dampf tyres from Schwalbe.The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn’t underestimate what this hardtail is truly capable of.The all-new Scout is a graduate from the school of gravity. Its geometry is on the “aggressive” side of the coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof’s Saddle Offset theory, will propel you efficiently up the trail ready for the gnarliest descent you can handle. The new geometry adds to the all-round capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame that is ready to scout out endless single track, session technical enduro trails or just hoon around like you’re auditioning for the latest “Scoutin’ About” video epic.The Nukeproof Scout is the embodiment of the Nukeproof attitude. When riding a Scout, you become part of something special and every ride of this hardcore hardtail rewards every last drop of your skill and commitment. You are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership.The New Scout, welcome to the world of Scoutin’ About, it really is an attitude.The 3rd generation the Scout has been tweaked to be the finest vintage of Scout.Key Upgrades Include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails The all new Nukeproof Scout builds on the cult like “Scoutin’ About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikersFeatures: Frame: Nukeproof Scout 275, custom triple butted hydro-formed Alloy, internal cable routing for dropper seat posts, ISCG 05 mount, threaded 73mm BB, Boost 148mm rear axle spacing, includes 3D Contoured Rubber Frame Protection for Down Tube, Seat Stay and Chain stay Fork: FOX 36 Float Rhythm, 140mm, 44mm Offset, BOOST, Grip Damper, Black Front Wheel: DT Swiss, M1900 Spline, 15x110mm, 6 bolt, 28H Rear Wheel: DT Swiss M1900 Spline, 148x12mm, Shimano Microspline, 6 bolt, 28H Tyres: Front: Schwalbe Magic Mary, Snakeskin, TL Easy, Addix Soft, 27.5x2.6"; Rear: Schwalbe Hans Dampf, Snakeskin, TL Easy, Addix Speedgrip. 27.5x2.6" Crankset: Shimano SLX M7100 12 Speed Crank, 170mm, 32T, 52mm Chainline Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus Chain: Shimano SLX M7100 12-Speed Cassette: Shimano SLX M7100 12-Speed (HYPERGLIDE+), 10-51T Brakes: Shimano SLX M7120 4 pot brake, Metal Pads Front Rotor: Shimano SM-RT66, 203mm Rear Rotor: Shimano SM-RT66, 180mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop Headset: Nukeproof Warhead, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 13.56kgSpecification: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm Axle to Crown: 529mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Max Chainring: 34T (32T Oval) Protection: 3D Contoured Rubber Frame Protection for DT/SS/CSEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.