Campagnolo Power Torque BB386 Bottom Bracket CupsAs the name suggests, these replacement Campagnolo Power Torque BB386 Bottom Bracket Cups are compatible with frames that have a BB386 (86.5x46mm) bottom bracket shell and are for use with Campagnolo's Power Torque range of chainsets. The extra width of the BB386 bottom bracket combined with the oversized Power Torque spindle provides unsurpassed levels of stiffness for superior power transfer.Features: Material: AlloyFrame Compatibility: BB386 - 86.5x46mm onlySpindle Compatibility: Campagnolo Power Torque onlyPlease Note: Replacement cups only, no bearings suppliedBuy Campagnolo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
In 2007 the revolutionary Ultra Torque bottom bracket technology was introduced. Now in 2011 the mid-range groups are even more affordable - still with the same high level performance features.Ladies and gentlemen, meet Power Torque System. The new single-piece axle is firmly fixed to the right pedal crank. The coupling between central pin and crank is perfect. This technical development makes it possible to eliminate any potential play.To make the bottom bracket more efficient an elaborate sequence of thicknesses iks introduced. The axle is incredibly light while still offering an absolute response in terms of rigidity. Thanks to the studies conducted by the Campy Tech Lab engineers, material was removed in the zones that could be lightened but at the same time the points of maximum stress were strengthened. Only in this way was it possible to achieve such a high technical value.A careful working out of the dimensions made it possible to maintain the lateral measurements already defined with the "elder brother" Ultra Torque, thus guaranteeing the maximum freedom of movement and reducing the possibility of contact with shoes. The design ensures simple installation and service. There are four simple steps for fitting the crankset quickly and without error. The right-hand bearing is already locked in place; the other is pre-inserted in the left-hand cup. No special tool is required - the new crankset is ready to propel you over endless miles.That's right, because another one of the objectives of the Power Torque System project was prolonged operating resistance. The tests conducted by the Campy Tech Lab were very exacting in this regard. Now it's your turn.
Please note that bearing are not included and for 2015 the BB shells no longer have the thin rubber seal inside.
Silca Press-On Disc Wheel Pump AdaptorRaising the bar when it comes to working with the world's fastest wheels, the Press on Disc Adaptor Aluminium from Silca is the smallest and most compact disc chuck around.Premium Disc Wheel Inflation Manufactured from 6066-T6 aluminium, this American-made adaptor continues Silca's tradition of world-class and elite level inflation devices and accessories. Featuring a bright-red 252 Elastomeric Internal gasket and brand new CompressionHead design, the Press on Disc Adaptor Aluminium gives a tried and tested ultra-airtight seal. Measuring a massive blow-off pressure of 393psi, three times higher than its peers, this highly-durable and efficient adaptor is one tough chuck. Features: Material: 6066-T6 Aluminium Compatibility: Schrader, Presta (inflation only) Head Type: CompressionHead, able to tighten gasket over 200% by simply tightening cap Buy Silca Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vittoria Terreno Dry G2.0 Gravel-CX TyreThe Terreno Dry is a cyclocross optimised tyre that is engineered with a perfect balance between fine-file tread and all-condition tread profiling. The result is a tyre that has a low-profile central tread design for exceptional rolling performance in dry conditions, which expands in depth towards the outer edges for superb cornering and braking traction.Features: Compounds: Graphene 2.0, 3C Compound Discipline: Dry Conditions, Cyclocross, Race Casing: Nylon 120 TPI Bead Type: TNT Tubeless Ready Weight: 410gTechnologies: Graphene 2.0 Compound: Vittoria's unique Graphene compound is superior in rolling performance, grip, traction and longevity. This compound provides the performance benefits required for competitive, consistent racing output. The Original Graphene Compound raised the bar for performance evenly through all disciplines, whereas Graphene 2.0 pin-points the performance requirements from each cycling discipline and enhances them for speed, grip, durability and puncture resistance. 3C Compound: Vittoria 3C is a layering process, which utilises three separate compound layers in the same tread. The unique properties of each compound that includes Graphene provides enhanced performance in all areas, most notably mileage, puncture protection and grip.Buy Vittoria Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor QX1 SRAM Conversion Crank Arm SpiderConvert your SRAM cranks to 76mm BCD. All new CNC machined Spiders for SRAM 1X cranks with this lockring spline. Features: To fit QX1 and NOQX1 Rings to Specialized cranksRead the interview with Cedric Gracia on Oval Chainrings here.Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
With the Press on Disc Adaptor Aluminium, its all about the gasket when it comes to making sure you get an ultra-secure airtight seal during inflation. The high-tech 252 Elastomeric gasket is constructed from 6066-T6 aluminium for durability and strength and features Silca's CompressionHead design which increases the snugness of the fit by 200% just by tightening it in your normal way. Capable of withstanding use at 393psi before succumbing to blow-off, the Press on Disc Adaptor Aluminium is around 3x as strong as its rivals, making it the must-have adaptor for adaptability, performance and longevity.
This tyre claimed victory on the 2018 Strade Bianche where slippy and unpredictable terrain is what this race is known for. Thanks to the thicker tread for the best puncture protection, the Graphene 2.0 compound and the 4C compound layup in the tread, this tyre provides optimised rolling performance, grip and traction, and exceptional wear life. Technologies: Graphene 2.0 Compound: Vittoria’s unique Graphene compound is superior in rolling performance, grip, traction and longevity. This compound provides the performance benefits required for competitive, consistent racing output. The Original Graphene Compound raised the bar for performance evenly through all disciplines, whereas Graphene 2.0 pinpoints the performance requirements from each cycling discipline and enhances them for speed, grip, durability and puncture resistance. 4C Compound: Exclusively developed by Vittoria and achieves high-end performance. The 4C is a layering process using 4 separate rubber compounds within the same tread. The 4C construction provides unmatchable versatility in both the central and side tread areas. The finished product is extensively tested to ensure it meets the competition level performance that road and off-road cyclists demand, and benefits the rider significantly, providing better rolling efficiency, better grip and puncture protection. Manufacturer's Part Numbers: 11A00107 Black/Brown Para - Black - Black 28mm 700×28c 11A00109 Black/Black Full Black 30mm 700×30c 11A00110 Black/Brown Para - Black - Black 30mm 700×30c 11A00103 Black/Black Full Black 25mm 700×25c 11A00106 Black/Black Full Black 28mm 700×28c 11A00104 Black/Brown Para - Black - Black 25mm 700×25c
The result is a tyre that has a low-profile central tread design for exceptional rolling performance in dry conditions, which expands in depth towards the outer edges for superb cornering and braking traction. Technologies: Graphene 2.0 Compound: Vittoria’s unique Graphene compound is superior in rolling performance, grip, traction and longevity. This compound provides the performance benefits required for competitive, consistent racing output. The Original Graphene Compound raised the bar for performance evenly through all disciplines, whereas Graphene 2.0 pin-points the performance requirements from each cycling discipline and enhances them for speed, grip, durability and puncture resistance. 3C Compound: Vittoria 3C is a layering process, which utilises three separate compound layers in the same tread. The unique properties of each compound that includes Graphene provides enhanced performance in all areas, most notably mileage, puncture protection and grip.
Created for runners, the GATO Sports Ultra Adjustable Chest Light features a bright and easily adjustable front LED light. Pumping out 200 lumens the front light can illuminate up to a distance of 25 metres, offering a clear view of where you're running. It's easily rechargeable, via USB, offering up to 5 hours of light so you never miss a step. Meanwhile, the rear red lamp ensures it's clear to others which way you're running. Shoulder straps give a secure, stable and comfortable fit, and thanks to reflective details, add to the overall visibility of this useful running accessory.
Designed to withstand rigorous use in the outdoors, the Bridgedale StormSock Midweight Waterproof Boot Socks feature a resilient terry pad footbed, heel and ankle for optimum warmth and cushioning. Primarily knitted from Merino Wool, known for its anti-bacterial, anti-odour and moisture management properties, the sock will keep your feet warm, dry and comfortable. The outer layer sock, made from nylon, also protects the Hydrotech waterproof breathable membrane against abrasion from the boot. Plus, the flat toe seam and elastic arch support ensure the sock remains in place and doesn't cause any hotspots. To finish, you can rely on the stretch PU membrane and clever matrix lamination process that bonds the three layers of the StormSock together, offering premium stretch, wear after wear. The boot length also comfortably sits above the ankle cuff of standard walking boots. Covering the leg up to the mid-calf it can be easily protected from water ingress with waterproof trousers or gaiters.
SRAM Centerline Rounded Center Lock RotorOptimised to bring you consistent, vibration-free braking, this Centreline disc brake rotor enhances the performance of your road or mountain bike’s (MTB’s) hydraulic disc brakes. SRAM has added the Centerlock mounting standard, so it’s compatible with modern wheels. Plus, as the edges have been rounded, it meets the UCI regulations for professional racing. This rounded design also makes your brakes run quieter and speeds up wheel installations.Features: Material: Stainless SteelCompatibility: SRAM road and mountain bike (MTB) disc brakesMount Type: CenterlockLightweightCenterLine brake trackUCI CompliantManufacturer's Part Number: RT-CLN-A2Weight: 160mm: 166g; 180mm: 213g; 200mm: 284g Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.