These limited edition Wolf Tooth ReMote Dropper Levers in anodised colours are ergonomic, lightweight and easy to install. Utilising sealed cartridge bearings for a silky-smooth action and a low profile, textured lever machined to the highest quality, this is the ultimate dropper upgrade.Compatible with all cable actuated dropper posts, the ReMote Dropper Lever is simple to install, maintain and has been built to last. Every single detail of the ReMote is the result of a singular drive to eliminate all complaints found with stock dropper levers.In an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Wolf Tooth's team have also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Wolf Tooth ReMote Installation InstructionsCompatibility:Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post. ,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best..Mounting Types:ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.
Limited Edition - Orange – Standard Action ReMote. Available in Clamp fitment ONLY. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. Mounting Types: ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.,. Compatibility: Compatible with all cable actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, Wolf Tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best..
Built To Prevent Chain Drop On Tough And Muddy Routes,Easily Adjustable And Simple Chain Removal,Machined From 6061-t6 Aluminium,.CompatibilityDesigned To Fit On Any Bike With An Integral Braze-on Mount. If You Have A Round Seat Tube With No Braze-on Mount, You Can Buy A Braze-on Adapter.,Primed For 6mm-51mm Chain Lines And 34t-46t Round Or Oval Chainrings,Required A Minimum Distance Of 10mm Between Crank And Centre Of The Ring,Optimised For Use With Both Elliptical And Round Chainrings.,For 1x Use Only.
Key Features:Compatible with all cable-actuated dropper posts.,Works with dropper posts that (a) have the barrel end of the cable at the remote position and (b) those that have the barrel end at the seat post.,If your post is not listed in the charts found in the image gallery, wolf tooth recommends measuring the pivot centre to end of your current lever. If it is greater than 52mm the light action will work best. If it is less than 52mm, the standard remote will work best.Mounting types:,Remote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars. All mountain bike handlebars are 22.2mm where your shift and brake levers attach even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max..
Designed for versatility, this model uses Wolf Tooth's renowned Drop-Stop technology, which improves chainring life and allows clearance for mud and debris. This makes it a great choice of upgrade for riders who want greater strength and reliability on every ride. Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility: These rings are for use with 110 BCD 5 arm cranksets. Stock 2x bolts will not work. You will need bolts like Wolf Tooth's 6mm bolts which are optimized for single ring mounting. Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring).
Whether you're pedalling around the city or exploring the countryside, this versatile component is designed to give you maximum performance. Equipped with a patented Drop-Stop technology, this model's wide side of the tooth has superior contact on the drive side which spreads the loads and improves chainring life. Its narrow side allows clearance for mud and debris which reduces friction, so you can benefit from a more reliable chain engagement as you move. Compatibility: - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50T are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36T chainring is NOT compatible with these cranks. - Size 42T and larger will work with the Dura Ace 9100 power meter.
This plier-set includes a spoke wrench, valve-core wrench, screwdrivers with multiple bits, an 8mm Hex and T10 and T25 Torx compatible bits. Plus, it features magnets to keep all the tool and tool-bits in place during use and when in storage. Lightweight, Durable and Convenient Multi-Tool The 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on a mountain bike (MTB) and road rides alike. Compatibility: Pliers work with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman) Specifications: Material: 7075-T6 Aluminium handles, CrV tool steel swivel head, S2 tool steel bits Size: 146mm x 20mm x 9mm Master links are not included Patent Pending Made in the USA Weight: 68g
Wolf Tooth 8-Bit Pack Pliers Multi ToolThe 8-Bit Pack Pliers from Wolf Tooth are a unique-styled lightweight, durable and convenient plier set with 17-functions. It includes a spoke wrench, valve core wrench, screwdrivers with multiple bits, an 8mm Hex and T10 and T25 Torx compatible bits. Plus, it features magnets to keep all the tool and tool-bits in place during use and when in storage.Lightweight, Durable and Convenient Multi-ToolThe 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on mountain bike (MTB) and road rides alike. Features: 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tyre sealant clogs from valve stem; tighten valve stem lock nut Magnets keep all bits in place Ball detent swivel head helps access hard-to-reach places Handle doubles as breaker bar for extra torque when head is bent 8mm hex bit tested to over 40 Nm torqueCompatibility: Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)Specifications: Material: 7075-T6 Aluminium handles, CrV tool steel swivel head, S2 tool steel bits Size: 146mm x 20mm x 9mm Master links are not included Patent Pending Made in the USA Weight: 68gBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 8-Bit Pack Pliers Multi ToolThe 8-Bit Pack Pliers from Wolf Tooth are a unique-styled lightweight, durable and convenient plier set with 17-functions. It includes a spoke wrench, valve core wrench, screwdrivers with multiple bits, an 8mm Hex and T10 and T25 Torx compatible bits. Plus, it features magnets to keep all the tool and tool-bits in place during use and when in storage.Lightweight, Durable and Convenient Multi-ToolThe 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on mountain bike (MTB) and road rides alike. Features: 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tyre sealant clogs from valve stem; tighten valve stem lock nut Magnets keep all bits in place Ball detent swivel head helps access hard-to-reach places Handle doubles as breaker bar for extra torque when head is bent 8mm hex bit tested to over 40 Nm torqueCompatibility: Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)Specifications: Material: 7075-T6 Aluminium handles, CrV tool steel swivel head, S2 tool steel bits Size: 146mm x 20mm x 9mm Master links are not included Patent Pending Made in the USA Weight: 68gBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 8-Bit Pack Pliers Multi ToolThe 8-Bit Pack Pliers from Wolf Tooth are a unique-styled lightweight, durable and convenient plier set with 17-functions. It includes a spoke wrench, valve core wrench, screwdrivers with multiple bits, an 8mm Hex and T10 and T25 Torx compatible bits. Plus, it features magnets to keep all the tool and tool-bits in place during use and when in storage.Lightweight, Durable and Convenient Multi-ToolThe 8-Bit Pack Pliers is a lightweight multi-tool with 17 functions. Eight attachments nest inside the handles of master link pliers using magnets and a clever storage system. These attachments then fit into an 8mm ball detent swivel head that has a 4mm opening for hex bits, which adds functionality to the already-versatile master link pliers. This new multi-tool was created to solve almost any minor repair on mountain bike (MTB) and road rides alike. Features: 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tyre sealant clogs from valve stem; tighten valve stem lock nut Magnets keep all bits in place Ball detent swivel head helps access hard-to-reach places Handle doubles as breaker bar for extra torque when head is bent 8mm hex bit tested to over 40 Nm torqueCompatibility: Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)Specifications: Material: 7075-T6 Aluminium handles, CrV tool steel swivel head, S2 tool steel bits Size: 146mm x 20mm x 9mm Master links are not included Patent Pending Made in the USA Weight: 68gBuy Wolf Tooth Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Chain Ring (110 BCD)This high-quality chainring is specifically designed for gravel use as it offers amazing smoothness and control with every rotation. It features a sturdy 7075-T6 aluminium construction which makes it incredibly robust when riding over mixed terrains. Whether you're pedalling around the city or exploring the countryside, this versatile component is designed to give you maximum performance. Wide Narrow MTB ChainringEquipped with a patented Drop-Stop technology, this model's wide side of the tooth has superior contact on the drive side which spreads the loads and improves chainring life. Its narrow side allows clearance for mud and debris which reduces friction, so you can benefit from a more reliable chain engagement as you move. Compatibility: - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50T are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36T chainring is NOT compatible with these cranks. - Size 42T and larger will work with the Dura Ace 9100 power meter.Features: Material: 7075-T6 Aluminium Use: MTB, Gravel, Cyclocross BCD: 110mm Bolt: 4-bolt Tooth Pattern: Wide narrowBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth Direct Mount Chainring for SRAM Cranks is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x set ups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with SRAM Cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:9, 10, 11, & 12spd Eagle - These chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed Eagle and 12 speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12 speed Flattop chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.