Designed for the demands of today's mountain bike (MTB) trail riding disciplines, this dropper post lever is fully-equipped for wherever your next adventure takes you. It is specifically designed for Shimano I-SPEC II and includes the IS-II hardware for quick and easy installation. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. ReMote IS-II for Shimano I-SPEC II - Includes IS-II hardware. UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTEISII
Available in a range of colours to match your frame or components colour scheme, the Wolf Tooth bolt-on seatpost clamp has a self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.
Whether you're pedalling around the city or exploring the countryside, this versatile component is designed to give you maximum performance. Equipped with a patented Drop-Stop technology, this model's wide side of the tooth has superior contact on the drive side which spreads the loads and improves chainring life. Its narrow side allows clearance for mud and debris which reduces friction, so you can benefit from a more reliable chain engagement as you move. Compatibility: - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50T are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36T chainring is NOT compatible with these cranks. - Size 42T and larger will work with the Dura Ace 9100 power meter.
Designed for versatility, this model uses Wolf Tooth's renowned Drop-Stop technology, which improves chainring life and allows clearance for mud and debris. This makes it a great choice of upgrade for riders who want greater strength and reliability on every ride. Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility: These rings are for use with 110 BCD 5 arm cranksets. Stock 2x bolts will not work. You will need bolts like Wolf Tooth's 6mm bolts which are optimized for single ring mounting. Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring).
This lever and cable conversion kit is specifically designed for mountain bike (MTB) riders who have a Rockshox B-post and a SRAM matchmaker clamp. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to engineered failure point, the lightweight ReMote leads in every category. UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-Diameter Ball-Bearing Pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile Lever: The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-Traction Lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad Compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTESUSBMM
Featuring a 6061 T6 aluminium body with a Delrin axle, the construction on the Wolf Tooth dropper lever is tough and reliable as you conquer the most demanding mountain bike (MTB) trail riding conditions. With a design that requires much less effort to operate than most remotes on the market, this model is developed as a dependable choice of upgrade from your dropper seatpost's factory-fitted lever. Wolf Tooth has kitted out this version with a longer arm and impressively light actuation, so riders can benefit from super-smooth operation as you dominate across the mountain. Suitable for use on all cable-operated droppers, it gives you the extra leverage and fine control to quickly drop your saddle for a descent or position it perfectly for a tough climb. Compact, Ergonomic and Sturdy Dropper Lever ReMote LA, or Light Action, is another option in Wolf Tooth's class-leading ReMote line of dropper remotes. The Wolf Tooth light action remote solves common dropper remote complaints with its compact, ergonomic and sturdy design. The patent-pending ReMote LA has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Lightweight with Smooth Ball Bearing Action Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. Compatibility: - Compatible with all cable-actuated dropper posts. - Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post. - If your post is not listed in the options, measure the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best (available separately). - ReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The updated model of the Tech 3 brake has a threaded hole and will require some modifications to the ReMote base. Technologies: Upfront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action Lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote LA’s solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available. High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad Compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Numbers: WTREMOTELACLMP Black 22.2mm Clamp WTREMOTELAISEV Black Shimano IS-EV WTREMOTELAHOPE Black Hope WTREMOTELAISAB Black Shimano IS-AB WTREMOTELAMM Black Matchmaker X WTREMOTELAISII Black Shimano IS-II
This kit includes a hard-wearing aluminium wrench and nickel-plated steel inserts that are durable enough for everyday use. The aluminium wrench has magnets that hold the nickel-plated steel inserts in place. The wrench has splines for bottom brackets and centrelock rotors and the four included inserts cover most common bike applications.
By attaching this dropper lever to a brake caliper, it gives the advantage of minimising components on your handlebars and freeing up valuable space. This also means the dropper lever will be in closer proximity to the handlebar grip, making it easier to use whilst on the fly. Wolf Tooth always sets out to provide solutions for as many set ups and different equipment options as possible. The Remote Clamp Conversion Kit is available for: Shimano IS-AB, Shimano IS-EV or Shimano IS-II (Select option from drop-down menu). Manufacturer's Part Number: WTISABCONVKIT Black Option 1 IS-AB WTISEVCONVKIT Black Option 2 IS-EV WTISIICONVKIT Black Option 3 IS-II
Perfect for accompanying you on your off-road pursuits, this brilliant model is equipped with a 6061 T6 aluminium construction. This makes it immensely durable as you weave between the trails and tackle any trailside obstacles which obstruct your path. Wolf Tooth has also added another layer of robustness to this version by giving it a delrin axle and pusher, so you'll benefit from a tough component on rebellious rides. RockShox Reverb B-Post Dropper Remote Engineered for use with RockShox Rever B-posts, this hard-wearing model is kitted out with a leak-proof and low-maintenance mechanical actuation system. This makes it incredibly easy to set-up and use while its easy cable detachment allows for straightforward servicing when needed. Solidly-mounted with a rattle-free integrated cable adjuster, this is the ultimate choice of upgrade for riders who want smoother and more dependable drops as you dominate across the woodland.
This tool is compatible with the EnCase system, this meaning you can store it in your bike handlebars. Durable, Convenient and Low-Profile Tool Storage Fix tubeless tyres and broken chains. This multi-tool has a chain tool on one end and a tyre plug built into the handle, with inner storage for tubeless tyre plugs. The full multi-tool was designed for use with an EnCase® System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. Known incompatible handlebars: Syntace Vector, Diety Skywire, Jones H-Bar Loop SG 2.5, Chromag BZA, Chromag Cutlass, BMC RCB01, S-Works Hover Carbon Compatible with all bicycle chains, including 12-speed
This chain whip tool features a hard-wearing aluminium construction, which makes it perfect at preventing your cassette from turning as you untighten the lockring. Suitable for use on any cassette up to and including 12 speed cassettes, this tool is equipped with a handle length of 11 inches. This makes it easy to use as you carry out essential maintenance, plus it weighs only 170g, so it won't weigh you down on your travels. We travel a lot with our bikes and are always looking for the leanest way to have everything we need to build or service a bike without packing 5lbs of tools! To help with this we developed some very specific Pack Tools that are high quality but weight conscious for those that do mobile wrenching, traveling with their bike, or just want one set of tools that can be thrown in when heading to the trail. This lightweight chain whip is strong enough to be your go to chain whip, but light enough that you won't need to leave it at home when on the move.
Propelling you across the woodland with power and poise, this fantastic component uses Wolf Tooth's patented Drop Stop tooth design. This technology enables it to be classed as one of the best-performing and longest-lasting wide/narrow chainrings on the market. It works by using its wide side to maintain maximum contact with the drive side which spreads the loads and improves chainring life. Also, its narrow side allows for excellent mud and debris clearance which reduces friction. Compatibility: Fits any 104 BCD crankset Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colors 104 x 30t - use 10mm bolts 104 x 32t, 34t, 36t, 38t use 6mm bolts. If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm) 32t 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore) The 30t x 104BCD chainring is the only available ring for the QUARQTM power meter Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention