The IceToolz BB Tool 12 Tooth is for FSA BB386 Evo, Hawk Racing BB3086, RaceFace Cinch, Rotor BSA30, Zipp Vuma and other external bottom bracket systems. Also fits SRAM DUB. Hardened CrMo steel. Use with 1/2" driver.
The Lifeline Speed & Cadence Sensor is Bluetooth 4.0 and Ant+ compatible. Keep a track of your Speed and RPM (revolutions per minute) and accurately record your performance. Installation is quick and easy.IPX7 water resistant (waterproof up to 5ft)Operating range: 2-60mph/ 18-220 RPMCR2032 batteries fitted (1 in each)Size: 28mm diameterWeight: Each sensor weighs approximately 10g (inclusive of mount and elastic band)Battery life: approximately 12 months based on 1-hour everyday useSimply mount the speed sensor to the centre of the rear wheel hub and the cadence sensor to the inside of the crank arm. Wirelessly connect to devices such as your GPS computer, iPhone/ Android smartphone and record your speed and cadence data. Installation instructions are included in the images and a printout is included with the product.
Simply mount the speed sensor to the centre of the rear wheel hub and the cadence sensor to the inside of the crank arm. Wirelessly connect to devices such as your GPS computer, Iphone/ Android smartphone and record your speed and cadence data. Installation instructions are included in the images and a printout is included with the product.
LifeLine’s Bluetooth and ANT+ Compatible Heart Rate Monitor can easily be connected to a large range of devices and used with smartphone apps, watches, consoles, and other compatible receivers. The transmitter pod is incredibly lightweight and is integrated within a soft fabric body belt delivering maximum performance and comfort when worn around the chest. The belt can be adjusted to provide a large range of sizes and fit. Tech Specs Heart rate range: 30~230bpm Typical range: 30ft Storage temperature: -10 ~ 60°C Operating temperature: 0 ~ 50°C Average active current: typical 95uA at transmission intervals of 1s Flexible connection interval controlled by Host device (Min:0.3125sec, Max:2sec, default:1sec) Peak Active current: 10.5mA at Tx 0dBm Stand-by current: less than 2uA Battery level display: 100%, 80%, 60%, 40%, 20%, 0% Battery: CR2032 lithium cell (200mAh) Battery life: up to 900hrs use RF system: 2.4Ghz
LifeLine Bluetooth & ANT+ Heart Rate MonitorA heart rate monitor that can be connected to multiple devices, simultaneously, via ANT+ and Bluetooth Smart which can be used to connect to your smartphone, watches, consoles and other compatible devices. The transmitter pod and strap are water resistant up to 30m and can be used during water sports and swimming. The chest strap is completely adjustable and will fit a range of sizes.Technical SpecificationsHeart rate range: 30~230bpmFlexible connection interval controlled by Host device (Min:0.3125sec, Max:2sec, default:1sec)Peak Active current: 10.5mA at Tx 0dBmStand-by current: less than 2uABattery level display: 100%, 80%, 60%, 40%, 20%, 0%Battery: CR2032 lithium cell (200mAh)Battery life: up to 900hrs useRF system: 2.4GhzTypical range: 30ftStorage temperature: -10 ~ 60°COperating temperature: 0 ~ 50°CAverage active current: typical 95uA at transmission intervals of 1sFeaturesDuplex Bluetooth Smart and Ant+ radio32-bit ARM Cortex M0 CPUFully water resistant up to 30mSuitable for use during swimming or water sportsSimultaneous device connectionSignal-filtering algorithmComes with R-R intervalFuel gaugeLong battery lifeComfortable and durable fabric beltBuy LifeLine Monitors from Chain Reaction Cycles, the World's Largest Online Bike Store.
eLECT Coach, Bluetooth Smart, incl. App for iOS and Android, compatibleto all eLECT components from MY2016 eLECT CoachThe wireless, digital cycle computer the Coach eLECT now completes the growing “eLECT Connectivity” product ecosystem with its TS R eLECT fork, TS eLECT damper and the new Vyron eLECT seat post as a multifunctional control centre for the growing “eLECT Connectivity” product ecosystem.,It connects all of the various eLECT products together, and enables interaction between these products.,All key data can be seen at a single glance on the display, and the rider is constantly informed of the status (locked/unlocked) of forks, shock and Vario dropper, and of the charge levels of the corresponding batteries.,In a tight race this could be the edge you need..
Mounting Kit for Handlebar eLECT Remote ANT+ Bluetooth Smart From MY2015Mounting kit for handlebareLECT remote ANT+,from MY2015.
NS Bikes Movement 2 Dirt Jump BikeThe NS Bikes Movement 2 features a tough and lightweight alloy frame with X-Fusion suspension, a single-speed Salt by WTP drivetrain and disc brakes. Ideal for fast, controlled and smooth dirt jump (DJ) and trail riding performance, this bike is optimised for style, agility and fun.Lightweight, Strong and Reliable Alloy FrameEvery dirt bike in the Movement Dirt Jump line-up is optimised to send you higher and faster thanks to the dialed geometry first seen on NS’s legendary Decade frames. There are further subtle but effective upgrades and the stiffness and responsive flow is spot-on for advanced riders who get a buzz from hitting smooth dirt lines time and time again.26" Wheels and Disc Brakes for Speed, Agility and ControlPairing sturdy 26" wheels with a playful modern-geometry frame, this durable Movement 2 is a superb option for aspiring and experienced dirt jump riders. The oversized, butted frame tubes deliver a rigid and easy-to-handle performance with every jump and landing, with a Shimano MT410 hydraulic disc brake on the rear wheel adding impressive speed control and stopping power when going flat out.X-Fusion MIG RC Suspension with Boost Hub SpacingThe X-Fusion MIG RC suspension fork and NS Lick handlebar deliver precision handling and efficient steering while the combined Octane One Fat seat and post keeps you comfortable and well-supported when sitting back. Kenda Small Block tyres, wrapped around the NS Dirt wheels, give a cushioned and impact-absorbing experience as you hit the ramps at pace, making this high-end Dirt Jump bike a top choice for the modern freestyle trail rider.INTENDED USE CATEGORY 5Intended Use: DIRT JUMPBicycles and frames in this category can be used on all kinds of pumptracks and dirt jump trails. They are designed to withstand jumps that exert forces equivalent to jumping a bike onto a flat surface from a height of approximately 60cm. These bicycle should not be ridden on rough MTB trails.Features: Frame: NS AL6061-T6 custom formed and butted tubes, tapered integrated headtube, 135x10mm Forks: X-Fusion MIG RC, 100mm travel, 110x15mm Boost, 1.5T Headset: GW integrated tapered IS42/IS52, sealed bearings Stem: NS Chemical 25.4 Handlebar: NS Lick, 740mm Grips: NS Hold Fast Unlocked Seatpost: Octane One fat seat-post combo Saddle: Octane One fat seat-post combo Front Brake: Tektro MD-M300 Aries 160mm Rear Brake: Nutt Y-2-1, 160mm rotor Rims: NS Dirt 26”, 32h Spokes: Spokes w/14mm nipples Front Hub: NS 110x15mm (sealed bearings) Rear Hub: NS 135x10mm single speed, 10T driver Tyres Front / Rear: Kenda Small Block 8 26x2.1" Crankset: Salt by WTP tubular Chromoly (CrMo) 25T Bottom Bracket: Octane One external 68mm, w/Spanish bearings Pedals: NS Nylon Chain: PYC P510H, 1spd Weight: 12.1kgEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Buy NS Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Broc Raiford's signature Odyssey Grips have been updated with smoothed ends that offer improved wear resistance. They're built from a durable rubber compound that'll keep them riding, with a comfortable ribbed grip and classic mushroom design. The bar end side features Broc's custom "BR" logo and they also include a pair of Odyssey bar ends. ###section### Product Specs DIAMETER: 30mm LENGTH: 160mm PACK SIZE: 2 (Pair)
The Twisted Pro PC Pedals from Odyssey stay true to the original Twisted PC style while offering up a significantly large body shape, slimmer height and more concave. Its simplicity, durability and affordability still making them an easy choice for riders everywhere. Built from a lightweight and incredibly durable high-strength nylon composite the Twisted Pro PC Pedals are designed to last. They also use traditional looseball bearings and a chromoly spidnle combination to keep things smooth. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: 413g / 14.5oz
The Park Tool BBT-32C is a shop quality tool for installing and removing Shimano and ISIS drive splined 20-tooth bottom bracket cups. Economical and compact, this version of the BBT-22 tool is perfect for the home mechanic. The BBT-32 installs and removes Shimano and ISIS Drive 20-tooth splined bottom bracket cups and features 32mm wrench flats for ease of use.
The Park Tool BBT-22C is a shop quality tool for installing and removing Shimano and ISIS drive splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup. The tool can be turned with a 3/8 drive torque wrench, 3/8 ratchet driver, 2mm wrench, 1 wrench, or FRW-1 Freewheel Remover Wrench.