This toolset features a sleek and slim-design 5-piece Joker spanner set for a wide range of bike repairs and tuning. It also comes supplied with a durable folding case that features Wera's 2go hook and loop system for convenient transport and storage. Tool specialist Wera presents Bicycle Set 10, a 5-piece Joker Spanner set in an extra slim design for bicycle maintenance and repairs. Supplied with a robust folding case for easy transport or storage. The case also features the Wera 2go hook and loop system on the back meaning the set can be easily attached to the wall, shelf or workshop trolley. This set is suitable for Road, MTB and E-Bikes. This combination spanner and wrenches are ideal for narrow spaces you can encounter when working on a bike. The combination of the 7.5 degree pivoted mouth and the double hexagon geometry doubles the placement points for the tool when you are working. This smart mouth technology significantly expands the range of uses in the confined spaces of a bike, even at pivoting angles of under 30 degrees. The set includes 1 pedal specific spanner This set also features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which size Joker you need for the job.
Silca thought long and hard about the design of the Italian Army Knife and have managed to reduce the thickness of the tool. The mid-length tools allow for the multi-tool to reduce its thickness by half. The mid-length tools allow the user to access recessed fasteners but are short enough not to suffer twist or over-torque damage commonly experienced by longer multi-tools. Each tool is forged rather than bent from hex stock, although a more expensive method, making the tool stronger. To finish the construction SIlca have double chromed the tools, fully stainless steel hardware and bushings help guarantee a long life free from corrosion. If you want pure quality and longevity the Silca Italian Army Knife will save you from many road or trail side blunders.
Wera Tools Bicycle Set 10 ToolsetIdeal for workshop-quality tooling on your road, mountain bike (MTB) or electric bike (E-Bike), the Bicycle Set 10 Toolset from Wera Tools features a sleek and slim-design 5-piece Joker spanner set for a wide range of bike repairs and tuning. It also comes supplied with a durable folding case that features Wera's 2go hook and loop system for convenient transport and storage.Tool specialist Wera presents Bicycle Set 10, a 5-piece Joker Spanner set in an extra slim design for bicycle maintenance and repairs. Supplied with a robust folding case for easy transport or storage. The case also features the Wera 2go hook and loop system on the back meaning the set can be easily attached to the wall, and shelf or workshop trolley. This set is suitable for Road, MTB and E-Bikes. This combination spanner and wrenches are ideal for narrow spaces you can encounter when working on a bike. The combination of the 7.5 degree pivoted mouth and the double hexagon geometry, doubles the placement points for the tool when you are working. This smart mouth technology significantly expands the range of uses in the confined spaces of a bike, even at pivoting angles of under 30 degrees. The set includes 1 pedal specific spanner This set also features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify which size Joker you need for the job. Features: 4 x 6003 Joker spanner (8mm, 9mm, 10mm, 13mm) 1 x 6003 Joker pedal spanner (15x174mm) 1 x Highly robust and durable textile case with Wera 2go hook system Size: 220mm x 90mm x 45mm Set Weight: 392gBuy Wera Tools Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Strong, corrosion-resistant and colour-coded for your convenience, these tools are a dependable addition to any workshop or home toolbox. Tool specialist Wera presents Bicycle Set 4, a compact 9-piece L-Keys set for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for road bikes, mountain bikes (MTB) and electric bikes (E-Bikes). This set really stands out from your average set of Allen keys because it features Wera's Take it Easy colour coded tool size finder system, meaning it's quick to identify with L-Key you need for the job. The plastic sleeving on the L-Keys makes them comfortable to use, even in low temperatures. The Ball Head end of each L-Key makes it easy to use these Keys in hard-to-reach areas of your bike. These L-Keys also feature Wera's Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally, the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle. The L-Keys fit securely into the storage clip which is made of solid rubber, giving easy removal and no wear to the coloured plastic sleeves of the keys or size markings.
Held securely in place with magnets and top retainer legs, the precision extruded aluminium built insert has 9 standard jaw openings, (5, 9, 10, 12, 14, 20, 25, 30, and 36mm) including one for holding hydraulic tubing. Easily secured to your vice, the Axle & Spindle Vice Insert AV-5 offers great hold for carrying out hub maintenance and other essential repair work.
The LifeLine Pro Crown Race Setting Tool is very simple to use. Instructions: Slide your crown race down your steerer tube. Apply a small amount of anti seize to the undersid of the crown race. Select the appropriate sized insert and place it on the crown race. Use a hammer and tap the end cap on the tube to seat the race into its proper place.
The LifeLine Headset Press Workshop Tool is high quality and helps to protect your finger, cups and frame on installs. The LifeLine Headset Press Workshop Tool is very simple to use and is a fantastic addition to your workshop.
This Park Tool bearing press kit is equipped with one bottom bracket bearing remover and two bushings that will assist with the fitting of new bearings (separately sold headset press tool also required to install pressfit bearing/cups). Ideally suited to removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems, this pack will help you to get the job done in no time at all. An up-to-date version of Park Tool's BBT-30.3, this set gives a longer length to work with wider fat bottom bracket shells, making it a fantastic tool to add to any garage or professional bike workshop. How To Use: To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings (included) are used with a headset press (not included) to quickly and accurately press the bearings into the shell.
Wera Tools Bicycle Set 4 L-Key ToolsetIdeal for tightening and loosening bolts commonly found on bikes, the Bicycle Set 4 L-Key Toolset from Wera Tools are high-quality tools that offer precise and reliable tuning whatever the component or job required. Strong, corrosion-resistant and colour-coded for your convenience, these tools are a dependable addition to any workshop or home toolbox.Tool specialist Wera presents Bicycle Set 4, a compact 9-piece L-Keys set for bicycle maintenance and repairs. Supplied in a lightweight and robust folding pouch, this set is suitable for road bikes, mountain bikes (MTB) and electric bikes (E-Bikes). This set really stands out from your average set of Allen keys because it features Wera's Take it Easy colour coded tool size finder system, meaning its quick to identify with L-Key you need for the job. The plastic sleeving on the L-Keys makes them comfortable to use, even in low temperatures.The Ball Head end of each L-Key makes it easy to use these Keys in hard-to-reach areas of your bike. These L-Keys also feature Wera's Hex-Plus technology, which means the tool has a greater contact area with the screw. This prevents the screw from damage (being rounded out) over time, and additionally the greater contact surface area allows you to apply up to 20% more torque. Hex-Plus tools fit every standard hexagon screw socket you might find on a bicycle. The L-Keys fit securely into the storage clip which is made of solid rubber, giving easy removal and no wear to the coloured plastic sleeves of the keys or size markings. Features: 2 x Hex-Plus 950 SPKL L-Keys (2mm, 2.5mm) 5 x Hex-Plus 950 SPKL HF L-Keys (3mm, 4mm, 5mm, 6mm, 8mm) 2 x TORX 967 SXL HF L-Keys (TX10, TX25) 1 x Lightweight and robust folding fabric pouch Size: 220mm x 100mm x 40mm Set Weight: 484gBuy Wera Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Installing a new bottom bracket can give your bike a new lease of life after moulded seasons on the roads and trails. However, pressing the bearings into the frame incorrectly can damage both the bearings and the bottom bracket shell. The LifeLine Press Fit Bottom Bracket Press uses precision bushings to guide the bearings into the shell easily and accurately, helping you get the best from your frame and bottom bracket. Supplied with bushings to fit BB86, BB30 and BB90 press fit bottom bracket standards, theLifeLine Press Fit Bottom Bracket press is essential for any rider who builds and maintains their own bikes.
Several bike frame models are compatible with the Deda Elementi DCR system (Deda internal cable routing), but for some brands, there are specific adaptors available that have been developed for a perfect fit. With several options available to choose from to match your set-up, this top cover adaptor is specifically designed for use with the Deda Elementi Vinci with Deda Internal Cable Routing (DCR) system. Compatibility The Colnago option is designed to fit C64, Concept and V3RS models. The Cannondale option is designed to fit SuperSix Evo models. The Trek option is designed to fit Madone and Emonda models. The Ridley option is designed to fit Noah Fast, Kanzo Fast, Fenix and Eddy Merckx 525 models. Manufacturer's Part Numbers: DWS40A Black One Size Colnago DWS40C Black One Size Cannondale SuperSix DWS40D Black One Size Trek DWS40F Black One Size Ridley
The strength of the Park Tool CN10 comes from its heat-treated and cold-forged steel handles, which feel powerful and dependable in your hand. Its precision ground cutting jaws ensure the smoothest and sharpest cut with every bite, making for that level of quality workmanship that Park Tool wants its users to experience. Providing comfort with quality, the handles are covered by dual-density moulded grips. These are contoured for supreme ergonomic control while you cut your inner or outer cables or crimp your end caps with the tool's built-in crimper. Held tightly together when not in use with its wire handle latch, this is a precise and durable cable cutter that any garage or home workshop should not be without.