Lightweight and compact multitool3, 4, 5, 6 and 8 mm hex wrenches cover most fixings on a bike including many crank bolts A straight blade screwdriver is useful for adjusting screws on brake and gear components All tools fold into the I-Beam to create a neat regular shape that will slip easily into a jersey pocket or seatpack A must have take-along tool for road and off-road use Covered by Park's legendary limited lifetime warranty
When the elements you ride in take their toll on your chain, removing and reinstalling the masterlink can become a more difficult task than it ought to be. The specially designed MLP-1.2 Pliers make sure this tricky job is a thing of the past. A simple insertion of the tool's specially measured jaws right into the masterlink lets you squeeze the handles to open the link to take it out, while pulling them apart to closes the link to secure it back in place. A time and effort saving tool, the Master Link Pliers MLP-1.2 is a handy tool for back-up when you need it.
The fine thread, special "V"-shaped handle, and super strong replaceable pin make chain removal and installation a breeze. The Park Tools CT-5 works on any bicycle chain (including Hyperglide®) and has a "shelf" for loosening tight links. At only 77 grams, it's the perfect take-along chain tool. Also works on 9 speed chains as well.
With pincers and legs constructed of chromoly steel and heat-treated for durability and strength, Park Tool has made sure that these pliers have been made comfortable for daily use by attaching soft-touch dual density handle grips. Resistance and hold are provided by an 'invisible', concealed spring which gives fantastic control when squeezed, letting you crimp, cut and pull with ease. A fantastic take on a toolbox must-have, the Needle Nose Pliers NP-6 from Park Tool is a hard-working, multi-use tool, in or out of the garage.
Uniquely designed for one of the more fiddly jobs involved in maintaining your bike, the Nipple Driver ND-1 provides brilliant leverage and manoeuvrability when fastening and unfastening your spokes. Its thick and comfortable dual-density handle rotates the kinked driver arm, fitted with a self-centring tip for optimum nipple engagement, for quick and efficient extraction and fixing. Suitable for use with rims up to 5omm deep, the Nipple Driver ND-1 is a comfortable and easy to use tool for a not-so-comfortable job.
With two different insert rings and an aluminium insert preventing any direct contact with your bearing's surface, the Oversized Crown Race Setting System CRS-15.2 allows you to gently tap the end cap to fix the race firmly and accurately in place. Bundled with an extension for working on fork steering tubes up to 425mm, this is a great bit of kit making sure your races are set correctly.
Allows you to accurately measure how centrally the rim sits over the hub avoiding the poor ride characteristics and frame rub that can result from a true but off-centre wheel Made in the USA and covered by Park's legendary limited lifetime warranty Click here to see the user instruction manual for this product
The Park Tool BB press removes and install the bearings and bearing units used in BB86, BB92, Shimano Press Fit, SRAM Press Fit GXP, Race Face Press Fit and other press fit bottom bracket systems using the nominal 24mm spindle. The Park Tool bb tool includes a bearing removal tool, which slides through and expands behind the bearing (like a head cup remover) so it can be tapped out with a hammer. The BBT-90.3 also includes two installation bushings (#669). Use the bushing in conjunction with an HHP-2 or HHP-3 Bearing Cup Press (sold separately) to press the bearings into the frame. Click here to see the user instruction manual for this product
Neatly organised in our world-famous Blue Box Tool Case and built for portability this EK-3 Professional Travel and Event Kit is packed with 56 of our finest tools, allowing hundreds of repair and maintenance tasks to be carried out. Kit Includes ATD-1.2 Adjustable Torque Driver AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20 Notch Shimano® and ISIS® Drive BO-2 Bottle Opener CC-4 Chain Checker CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1.2 Cassette Pliers CT-3.3 Chain Tool CWP-7 Compact Universal Crank Puller DCW-1 Double-Ended Cone Wrench: 13/14mm (2) DCW-2 Double-Ended Cone Wrench: 15/16mm (2) DCW-3 Double-Ended Cone Wrench: 17/18mm DSD-2 Derailleur Screwdriver: Cross Tip DSD-4 Derailleur Screwdriver: Flat Blade DT-2 Rotor Truing Fork FR-5.2H Cassette Lockring Tool with Handle GSC-1 GearClean™ Brush HCW-15 36mm/32mm Headset Wrench HMR-8 8oz Shop Hammer HT-8 8mm Hex Tool HXS-1.2 Hex Wrench Set LP-7 Utility Pliers MLP-1.2 Master Link Pliers MW-8 Metric Wrench: 8mm MW-9 Metric Wrench: 9mm MW-10 Metric Wrench: 10mm PAW-12 12" Adjustable Wrench PW-4 Professional Pedal Wrench RR-12 Tape Measure SW-0 Precision Spoke Wrench: .127" SW-2 Precision Spoke Wrench: .136" SZR-1 Shop Scissors TL-6.2 Steel Core Tire Levers TWS-1 Torx® Compatible Wrench Set UP-SET Utility Pick Set VC-1 Valve Core Tool ZP-5 Flush Cut Pliers
The Wheel Truing Stand TS-2.3deal for wheel truing up to 29""+ in size, with or without a tyre fitted, this top-quality workstand is a superb addition to any workshop setup. Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench — still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder coated heavy-gauge steel and is manufactured, assembled and calibrated in St. Paul, Minnesota. Strong, comfortable knobs, spring-loaded calipers, and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use.
Optimised to be more accurate and easier to calibrate and setup, this versatile pro-level truing stand is robust and durable. It’s engineered to accurately self-centre virtually any diameter of wheel size (16" to 29") and any tyre width up to 5"+ without having to remove disc brake rotors. Precise, Accurate and Reliable Professional Wheel Truing Performance Featuring an immensely reliable and long-life construction, this Wheel Truing Stand is built of chrome-plated powder-coated heavy gauge steel and provides flex-free performance. Precisely adjustable and keeps wheels centred with its tall and movable uprights, this immensely accurate design also features direct-action truing calipers. These additional truing calipers allow you to work on the narrowest of rims to the fattest of tyres with superior accuracy with hassle-free functionality. Plus, it is equipped with all the frills you require for the ultimate-adjustability and wheel compatibility - including, a built-in Speed Knob to quickly change axle widths and thru-axle adaptors, and it's equipped with removable and replaceable nylon caliper tips to protect painted and anodised rims.
Specially designed and precisely manufactured to gently adjust bent or damaged brake rotors, the Park Tool disc rotor truing tool features two different slot depths laser cut from high quality steel. Simple to use, one slot is used for minor adjustments and one for fixing major damage. The centre of its handle is vinyl dipped for comfort.