FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
Made from a P600/D PU coated heavy duty fabric, it can withstand the wear and tear of commuting or travelling with your bike to ensure your chain remains damage-free from the garage to the starting line. Dirt, tear and oil resistant, it is the optimum way to keep your chain and the areas it comes into contact with protected.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Internal Cable Routing ToolThis cable routing tool removes the pain of feeding internal cables through frames. Boasting a series of magnets, adapters and a guide cable, this handy tool allows you to feed inner cables, Di2 wiring and hydraulic hose through your frame effortlessly.Simple Internal Cable RoutingTo use, feed the guide cable through your frame using the magnet on your multi-tool and the magnet on the guide cable to pass from the exit to insert point. Next, attach the correct adaptor from the multi-tool to your cable which requires routing. Attach the magnet adaptor to this cable and connect the guide cable to the routing cable. Finally, simply drag the routing cable back through the frame by pulling on the guide cable.Features: Main magnet 1.3m guide cable Hydraulic hose adaptor Brake hose adaptor Di2 E-Tube adaptorBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crank Puller (CCP-22)With its long handle and the finely threaded head, the CCP-22 crank arm removal tool quickly attaches and gives you the advantage you need for removing stubborn crank arms. Park Tool has made it to be compatible with a wide range of models, making it ideal for home mechanics and professional mechanics alike.Features:Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt The strong rotating tip system ensures smooth operation and long lifeNOTE: For cranks using the ISIS Drive or Octalink system, look for the CCP-44 or the CWP-7 models.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crank Puller (CCP-44)With its long handle and fine thread to engage fully with compatible cranksets, the CCP-44 Crank Puller gives you the grip and control for removing even the most stubborn crank arms. Park Tool has made this easy to use pulling tool compatible with a wide range of Shimano Octalink and FSA ISIS Drive models.Features: Specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a "self-extracting" system22 x 1mm fine thread provides leverage needed to remove tight crank armsStrong rotating tip system ensures smooth operation and long life Not suitable for use with square taper type cranksetsBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Your mini-tool is probably one of the most underrated things in cycling. But you feel blessed left stranded at the side of your trail with a bike that is no longer doing what it’s supposed to do. The PrimeFold offers various setups that help you to bring your bike back into shape and start moving again. Better be safe than sorry with the new lightweight and durable PrimeFold mini tool. It’s got the entire package in a fashionable colourway. The PrimeFold is definitely one of those little things you should treasure. It could save your ride someday. Features & Specs: 9 Function Tool:A high-end folding tool with chrome plated tools.,Strong tools combined with a lightweight blue anodized aluminium case.,Dual-sided hex key bolt will not separate during use.,Hex keys: 2, 2.5, 3, 4, 5, 6 and 8 mm.,Philips screwdriver.,T25 Torx.,. 14 Function Tool:A high-end folding tool with chrome plated tools.,Strong tools combined with a lightweight blue anodized aluminium case.,Dual-sided hex key bolt will not separate during use.,Hex keys: 2, 2.5, 3, 4, 5, 6 and 8 mm.,Philips and flat screwdrivers.,T25.,Spoke wrenches.,8 mm box wrench.,. 16 Function Tool:A high-end folding tool with chrome plated tools.,Strong tools combined with a lightweight blue anodized aluminium case.,Dual-sided hex key bolt will not separate during use.,Hex keys: 2, 2.5, 3, 4, 5, 6 and 8 mm.,Philips and flat screwdrivers.,T25.,Chain rivet tool.,Spoke wrenches.,Pad spreader.,. 18 Function Tool:A high-end folding tool with chrome plated tools.,Strong tools combined with a lightweight blue anodized aluminium case.,Dual-sided hex key bolt will not separate during use.,18 functions.,Hex keys (2, 2.5, 3, 4, 5, 6 and 8mm), Philips and flat screwdrivers, T25/T30, Chain rivet tool, Spoke wrenches, Knife.,Size: XL.
High-end folding tool with durable aluminium case,Dual sided hex key bolt that will not separate during use,18 functions:Hex keys: 2, 2.5, 3, 4, 5, 5, 6 and 8mm,Philips and flat screwdrivers,T25 torx,Tyre levers,Spokes wrenches,Chain rivet tool..
The BBT-19.2 is a heavy duty shop quality tool for installing and removing Shimano SRAM Truvativ Race Face FSA and Campagnolo 16-notch external bottom bracket cups with an outside diameter of 44 mmUpdated to be more accurate and longer lasting the BBT-19.2 can be turned with a 3/8 inch drive torque wrench or ratchet a 1 inch wrench or a Park Tool FRW-1 Freewheel Remover Wrench
A chain tool that is small enough to go anywhere yet which performs like a full size workshop toolFine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivetsIncludes a loosening shelf to release stiff links after assemblyReplaceable driving pin headWorks on most bicycle chains including 10-speedWeighs just 77 grams
The best road mini pump does two things—inflates tubes quickly and efficiently and it also stashes easily. This reliable little guy does both. Now available with a traditional frame-mounting bracket the Air Tool Road Mini pump moves almost twice as much air as its predecessor with its inverted double-chamber design. It gives you total peace of mind on days when pesky flats catch you off-guard. Inverted double chamber design is smaller yet increases the air handling capacity by 58% when compared to our previous design reducing pumping time by up to two minutes. Presta-only head keeps size and weight to a minimum while the dust cover keeps the insides clean. Machined outer barrel for extra grip while pumping. All-aluminum inner and outer chamber for durable performance. Water bottle boss mount included. Updated dust cover design prevents pump from opening due to vibration. Max pressure: 100 PSI (6.9 bar) Volume-per-stroke: 30cc Water bottle boss frame mounting bracket included.
The Birzman Feexman E-Version 10 is a simple, unobtrusive multi tool that is hard-wearing and constructed to get you back in the saddle quickly.Functions: 10Material: CrV (Tools) / Aluminium (Sides) / Alloy steel (Chain Tool)Size: 68.5 x 50 x 14mmWeight: 119gHex keys 2.5/3/4/5/6 (L-shaped) /8mmTorx key T25Crosshead screwdriver #1Flathead screwdriver 4.5Chain rivet extractor (8-12 speed, 3/32" single speed)The E-Version 10 includes six Hex keys 2.5/3/4/5/6 (L-shaped) /8mm, one Torx key T25, a cross-head #1 and one flathead screwdriver 4.5, plus a chain tool (8-12 speed, 3/32" single speed), designed to cover common road or trail-side eventualities. All multi-tools in the E-version range feature Chrome Vanadium steel bits, with steel side plates and connecting bolts ensuring smooth operation.