Folding multi tool from Saltplus. The salt folding tool has a 6061-T6 frame, with 6150 high tensile steel bits. Features: chain breaker, spoke wrench, hex bit 2, 2.5, 3, 4, 5, 6, 8mm, screwdriver philips and flat head, open wrench 8mm, 10mm, t-25 torx bit Weight: 168g (5.9oz)
The Park Tool CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. The unique "floating tip" ensures smooth operation and long life. As with most Park Tool products, it also features a hole specifically designed for hanging on a tool wall.
The Park Tool CCP-44 is specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a self-extracting system.
Feed the guide cable through your frame using the magnet on your multi tool and the magnet on the guide cable to pass from exit to insert point. Then attach the correct asaptor from the multi tool to your cable that requires routing. Attach the magnet adaptor to this cable and connect the guide cable to the routing cable. Then simply drag the routing cable back through the frame by pulling on the guide cable. Sound tricky? It's really not. Check out the instructions added to the images and soon we'll make a video demonstrating how to use the tool!
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
Made from a P600/D PU coated heavy duty fabric, it can withstand the wear and tear of commuting or travelling with your bike to ensure your chain remains damage-free from the garage to the starting line. Dirt, tear and oil resistant, it is the optimum way to keep your chain and the areas it comes into contact with protected.
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Internal Cable Routing ToolThis cable routing tool removes the pain of feeding internal cables through frames. Boasting a series of magnets, adapters and a guide cable, this handy tool allows you to feed inner cables, Di2 wiring and hydraulic hose through your frame effortlessly.Simple Internal Cable RoutingTo use, feed the guide cable through your frame using the magnet on your multi-tool and the magnet on the guide cable to pass from the exit to insert point. Next, attach the correct adaptor from the multi-tool to your cable which requires routing. Attach the magnet adaptor to this cable and connect the guide cable to the routing cable. Finally, simply drag the routing cable back through the frame by pulling on the guide cable.Features: Main magnet 1.3m guide cable Hydraulic hose adaptor Brake hose adaptor Di2 E-Tube adaptorBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crank Puller (CCP-22)With its long handle and the finely threaded head, the CCP-22 crank arm removal tool quickly attaches and gives you the advantage you need for removing stubborn crank arms. Park Tool has made it to be compatible with a wide range of models, making it ideal for home mechanics and professional mechanics alike.Features:Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt The strong rotating tip system ensures smooth operation and long lifeNOTE: For cranks using the ISIS Drive or Octalink system, look for the CCP-44 or the CWP-7 models.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crank Puller (CCP-44)With its long handle and fine thread to engage fully with compatible cranksets, the CCP-44 Crank Puller gives you the grip and control for removing even the most stubborn crank arms. Park Tool has made this easy to use pulling tool compatible with a wide range of Shimano Octalink and FSA ISIS Drive models.Features: Specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a "self-extracting" system22 x 1mm fine thread provides leverage needed to remove tight crank armsStrong rotating tip system ensures smooth operation and long life Not suitable for use with square taper type cranksetsBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Park Tool SPA6C uses hardened, replaceable pins. Designed for heavy-duty use, the distance between pins is adjustable, allowing use on virtually any hanger cup.
These Park Tool SD0, SD2, SD3, SD6 Screwdrivers are shop quality screwdrivers designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.SD-0: No:0 Phillips SD-2: No: 2 PhillipsSD-3: 3mm flat bladeSD-6: 6mm flat blade